Question about Teac SL-D80 "Nostalgia" Music System Shelf System

Open Question

Teac sl d80

I need to set the clock it is only letting me set the hour but not the minuts and it keeps blinking
Thanks,
Blondie

Posted by on

1 Suggested Answer

SOURCE: TEAC SL D80

Probably you want to convert it to 220 volt. Simple, go to mechanic who will take out Transformer and easily convert it to 220, I got it done myself as well, AM/FM will work properly being analogue tuning.

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the time


  • Use the actual stereo to set the clock, not the remote.
  1. Turn off the stereo.
  2. Press "clock/timer" for at least 2 seconds.
  3. Press "memory" to make the hours blink.
  4. Turn the volume knob to adjust the hours.
  5. Press "memory" to make the minutes blink.
  6. Turn the volume knob to adjust the minutes.
  7. Press memory.
  8. Now the clock setting is complete.
Regards, Tony

May 21, 2011 | Sanyo AWM-660 CD Shelf System

1 Answer

How do you set the clock


This is on page 23 of the manual for your device... This is the web link...
http://www.teac.com/resources/pdf/mc-dx32i/MCDX32_B_OM.pdf

If the unit is on, press the STANDBY/ON switch to turn it standby

2 Press and hold the TIME SET button for more than 3 seconds and release it when "12H" or "24H" appears on the display. "12" or "24" blinks. If you want to change the hour mode, press the .or/ button.

< If you leave the unit idle for 7 seconds, the time setting mode will be cancelled.

3 Press the TIME SET button once more. The "hour" value blinks.

4 Press the SKIP button (.//) to set the current hour.

5 Press the TIME SET button. The "minute" value blinks.

6 Press the SKIP button (.//) to set the current minute.

7 Press the TIME SET button. The clock starts.

Mar 12, 2011 | Teac MC-DX32i Shelf System

1 Answer

Clock set instructions for Sanyo stereo awm2800U


you need the remote to change the clock press timer am 1200 blinks press timer again for at least 2 seconds the hour blinks press tuning/time set plus or minus press clock adjust the minute will blink press time set to adjust minutes then clock adjust there you go...

Mar 10, 2009 | Sanyo AWM-2800 CD Shelf System

1 Answer

Changing the clock time


small button just right of LCD screen push watch push once for hour, puch tunener bar up or down for hour. push button to change to minutes, push tunerbar up or bown to change minutes

Aug 30, 2008 | Teac DC-D2831 CD Shelf System

1 Answer

TEAC SL D80


Probably you want to convert it to 220 volt. Simple, go to mechanic who will take out Transformer and easily convert it to 220, I got it done myself as well, AM/FM will work properly being analogue tuning.

May 23, 2008 | Teac SL-D80 "Nostalgia" Music System Shelf...

1 Answer

Sony MHC-2800 setting the clock


Hi, it's simple. First press "Timer1" and Timer2" buttons together, clock on display will start blinking, by cursors "Up/Down" you can change the value of hours and minutes (switching between hours/minutes by "Left/Right" cursor). To save set time press "Memory". Enjoy your set clock :)

Jan 07, 2008 | Audio Shelf Systems

9 Answers

Clock


Turn the system on and press the "Clock/Timer" button (located above the eject button for Deck 1). The clock will appear. To change the time, simply hold down either the < or > buttons (the ones you use to change radio stations and begin CD/tape playback). Press "Clock/Timer" again to lock in the time.

Dec 28, 2007 | RCA RS2622 CD Shelf System

2 Answers

Teac cd-x10i


  1. press the standby/on switch off
  2. Press and hold the TIME SET button for more than 3 seconds and release it when "12H" or "24H" appears on the display. press the right and left arrows to select. press TIME SET again.
  3. the hour value blinks use the right and left arrows to select the current hour. press TIME SET gain.
  4. The minute value blinks. using the right and left arrows select minutes.
  5. press TIME SET again and the clock starts.

Dec 11, 2007 | Teac MC-DX22I Shelf System

1 Answer

Setting clock


call(1-323-726-0303 ext.617) or go to this site for contact details http://www.teac.com/consumer_electronics/CustomerService.html or you can e-mail to parts@teac.com and request a manual, or this link will let you get the manual online http://www.service-manual.net/ashop/catalogue.php?exp=&cat=237 only slight problem is this download will cost you $11.99, should be free from teac direct. Hope this helps :)

Feb 28, 2007 | Teac CD-X8 CD Shelf System

2 Answers

Clock


Press POWER to Turn ON the unit.
Press CD/Door OPEN.
With the Doors Open, on the Inside Right is a "Clock Set" Button... Press it once.
With the Hour blinking, press the "CD-Tuner-Skip" Up or Down Buttons to set hour.
Press the "Clock Set" Button again to make the minute display blink.
Adjust the minutes the same way.
Once the hour and minutes are both set, be sure to press the "Clock Set" button
one more time. Now the Hour and Minute display should no longer be blinking and
you should be good to go. (I just figured it out for myself.) Hope this helped!

Jan 04, 2007 | Fisher SLIM-2000 CD Shelf System

Not finding what you are looking for?
Teac SL-D80 "Nostalgia" Music System Shelf System Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio Shelf Systems Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

John Trigg

Level 2 Expert

250 Answers

The Knight
The Knight

Level 3 Expert

68393 Answers

Are you a Teac Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...