Question about Lexmark X1290 All-in-one Inkjet Print Printer

Open Question

My printer preferences tabs are in a foreign language

Foreign language.

Posted by on

5 Suggested Answers

  • 214 Answers

SOURCE: 3015 hp laser jet printer window in foreign

Should be   tools setting go to factory reset change language to English

Posted on Apr 23, 2009

  • 1 Answer

SOURCE: Would like to change Language

1. First of all, you must completely uninstall your current driver (with foreign language).
2. Download Epson R290 English Language Driver from here :
http://www.epson.com.sg/epson/drivers/driver_download.htm?dc=1&mode=3&mfalse&catid=1&pid=1259
3. Unplug your printer USB Cable from your PC
4. Run : Setup.exe
5. Follow the instruction, and thats it. You've English Language now :)

I have tried this and it worked :)

Posted on Jun 08, 2009

  • 668 Answers

SOURCE: my printer, X73, jams up the paper when I try to

Hi,
It tends to be the problem of roller . Roller is not moving smoothly , just manually move the roller to and froth and then close the lid properly . Now try to take print it will work fine .

Hope this helps .

Posted on Mar 24, 2010

etaf
  • 779 Answers

SOURCE: Unable to connect printer to computer

The support site is here http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=+X2500&productCode=LEXMARK_X2500&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X2500&searchid=1270318972591#1 Includes the drivers you need and documents
heres the getting started manual http://www.lexmark.com/publications/pdfs/2007/2500/v3708617_en.pdf
heres the full user manual http://www.lexmark.com/publications/pdfs/2007/2500/v3709407_en.pdf
Heres the link to the drivers for various operating systems http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=+X2500&productCode=LEXMARK_X2500&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X2500&searchid=1270318972591#3
you should be able to download the driver and double click on it to install - then follow the instructions - do not connect the printer until asked to
Heres a documnet explaing how to download the driver - Although i have provide a link above to the download page, so you do not need to go through all that - and then what happens when you double click on the downloaded driver http://support.lexmark.com/index?page=content&segment=DOWNLOAD&locale=en&userlocale=EN_US&id=HO44&productCode=LEXMARK_X2500&actp=TOP_DOCS

  • If this solutions solves you problem, please do not forget to rate my solution.
  • If not, then please comment back so I can help some more

Posted on Apr 03, 2010

  • 32 Answers

SOURCE: I've installed a Ricoh GX3050 and it defaults to foreign language

just download a new driver from www.ricoh.uk
select help and support for this

Posted on Apr 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is FB likes, comments and shares showing in foreign language?


Probably because you set the wrong language in the facebook preferences.

Check this out - https://www.facebook.com/help/327850733950290 [How to change language preferences on facebook]

Apr 08, 2015 | HP Computers & Internet

1 Answer

I want english and my tom tom is in foreign language how do i reset?


Turn the unit on, go to change preferences, go to page 8 in preferences. you will see a button marked "change language" in the upper left row. Select it and scroll through the list to your preferred language. Select the language you want and you're done.

Jan 16, 2010 | Tomtom GO 720 GPS Receiver

1 Answer

My TomTom 1 is in a foreign language. How do I


Change preferences, select the flags icon, scroll to what you need and select.

Aug 25, 2009 | Tomtom GPS

1 Answer

My tomtom is in a foreign lanuage


Start the unit up and go through the preferences. You will have to decipher the icons but, depending on what language you have it set for now, it shouldn't be too hard to find the language setting.

Feb 01, 2009 | Tomtom ONE 3rd Edition GPS

1 Answer

Would like to change Language settings for Epson Stylus Photo R290 Series Printer... Currently when printing a Test and when I go to the Print Preference, its showing as a foreign language... How can...


1. First of all, you must completely uninstall your current driver (with foreign language).
2. Download Epson R290 English Language Driver from here :
http://www.epson.com.sg/epson/drivers/driver_download.htm?dc=1&mode=3&mfalse&catid=1&pid=1259
3. Unplug your printer USB Cable from your PC
4. Run : Setup.exe
5. Follow the instruction, and thats it. You've English Language now :)

I have tried this and it worked :)

Aug 28, 2008 | Office Equipment & Supplies

2 Answers

Language


Hi-

Try uninstalling and reinstalling the driver and that should default it back to english. keep me posted for any progress and pls rate solution if it helps. Thanks!


Jul 16, 2008 | Epson Stylus CX3200 All-In-One InkJet...

2 Answers

How do i change the language?


I have Brother DCP-130C all in one Printer.
When I installed the software I chose English as the language, but when i am scanning & when i go into printing preferences it seems to be in German. I un-installed & re-installed but still not in English.
Any ideas how I can change the language to english please?

Mar 31, 2008 | Brother DCP 130C All-In-One InkJet Printer

3 Answers

Epson stylus dx7450


Windows uses a foreign language information file when installing a printer driver via USB. This then installs the associated foreign printer driver and utility files.

This can be corrected with a full uninstall of the printer driver. The standard uninstall will not remove the original foreign language files. Please follow the steps below to install the English version of the printer driver:

Step One:
Switch off and disconnect the printer. Go to Add/Remove Programs in Control Panel, and remove EPSON PRINTER SOFTWARE (this may be named in a foreign language like 'EPSON DRUCKER SOFTWARE' - when you are at this stage and have selected to 'change/remove' this item, a window will appear titled 'EPSON Printer Utility' - above the icons of each of your EPSON printers will be a 'Printer Model' tab and 'Utility' tab (Note, if there is no Utility Tab then just continue). Please click on one of the printers so it is highlighted, then select 'Utility' - please tick every box listed in the 'Utility' section and select 'OK'. Answer positively to all questions and once the uninstall is complete, you will need to follow the same procedure to remove the other EPSON printer drivers by clicking on 'EPSON PRINTER SOFTWARE' again and 'CHANGE/REMOVE'.

Step Two:
Open up Windows Explorer or My Computer, and navigate to the drive (usually C) where windows is installed. Browse to the folders called windows/inf on XP, or winnt/inf on 2000. If you can not locate the INF folder please go into the START MENU and select RUN. If there is any text within this box please remove and type C:\windows\inf and press enter. Please be advised that 'C' represents the hard drive on your PC. If your hard drive is a different letter please amend as necessary.

Find the files labelled OEMxx.inf or OEMxx, where xx is a number from 00, 01, 02 etc upwards. You will need to double click on each INF file in turn, and if it says “SEIKO EPSON” or “EPSON” within the first few lines, then you need to close the file, and then delete it. Please also can you delete the corresponding PNF. Repeat this until all EPSON INF files are removed.

Note: You cannot open a PNF file.

Step Three:
Staying in Explorer or My Computer, stay within the windows folder (winnt folder on 2000) and navigate to system32/spool/drivers, and go into the folder named "w32x86". Delete any folders that begin with "epson", and then restart. Once rebooted, empty the recycle bin, and attempt reinstallation of printer, using the instructions below.

Step Four:
MAKE SURE YOUR PRINTER IS STILL SWITCHED OFF AND DISCONNECTED AT THIS POINT. Insert your driver CD. Double Left Click on My Computer and select your CD drive by right clicking on the CD icon and select open. When you first open/browse the CD-Rom then you should see various folders. Please browse to the Common Folder. Within here select the Printer Driver Folder then choose the WinVISTA/XP_2k folder. Run the Setup.exe file and complete the installation as normal making sure you only connect the printer when requested to do so.

Step Five:
Once this has completed installing, please remove the CD from the CD drive and reboot the PC. The foreign language tabs will now appear in English.

Mar 16, 2008 | Office Equipment & Supplies

1 Answer

Won't print


if your computer is in a foreign language - and you cannot understand the prompts. try the following.
1 press the setup button
2 press the right arrow key once
3 press the down arrow key twice
4 press the right arrow key twice

that should put you on the languages, scroll through the options until you find English (or your preferred language) and press the right arrow key twice once more - that should reset the language for you

Dec 04, 2007 | Epson ACULASER CX11NF All-In-One Printer

Not finding what you are looking for?
Lexmark X1290 All-in-one Inkjet Print Printer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...