Question about Frigidaire GLTF2940E Gallery 3.5 Cu. Ft. King Size Front Loading Washer

1 Answer

Washer fills with water but will not agitate to wash the clothes.

Model is front loading Gallery washer - 16 cycle tumbler. It is about 9 years old. the washer will fill with water but will not agitate to wash the clothes nor does it spin. It makes a grinding sound like (not a loud sound).

Posted by on

  • bk_white Nov 30, 2008

    If it is the pump, would it still fill with water and empty.

  • Anonymous Dec 09, 2008

    I have a frigidaire top loader. It will fill but won't agitate. It will spin to empty water.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

REPL/ PUMP GRINDING NOISE IS BROKEN IMPEELER INSIDE PUMP SHOULD FIX PROBLEM

Posted on Nov 30, 2008

  • Johnny Ramirez
    Johnny Ramirez Nov 30, 2008

    IT CAN STILL BE A PUMP PROBLEM ,, IS THERE WATER INSIDE MACHINE ???? PLEASE INSPECT MOTOR ,, IF CAN REMOVE BELT ,AND TURN MOTOR WITH HAND AND SEE WHAT HAPPENS

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spinning cycle


Keeping in mind that the soap & bleach gets dispensed into your wash on the second to last rinse cycle and that most all rinse cycles are in cold water. Is your cold water valve screen plugged causing your washer to rinse poorly? Are you using the HE detergent? If not maybe the washer is sudsing up to much and having a hard time rinsing all the suds and bleach out and leaving the clothes soapy.

Fill the washer up with no clothes in it on a cold/cold wash setting does it take a long time to fill the washer up? Also when it is full and agitating is there suds in the washer?

Last suggestion is if the drain is hose is a lot higher than the top of the washer it might have a hard time draining out all of the soap water before the next load

Mar 23, 2008 | LG WM-2277HW Front Load Washer

3 Answers

My kenmore 800 washer is off cycle for example when i start a load of clothes it starts agitating before filling, and doesn't always spin all the water out of the clothes


I have the exact same problem with my Kenmore 800 top loader, Model # 110.29822800. It is only 1.5 years old. Any suggestions?

Jan 19, 2011 | Kenmore 22422 Top Load Washer

1 Answer

My GE top load washer is about 5 months old. It fills up and runs through the agitation cycle but then stops at the end spin cycle. The clothes just sit in the water. I checked the hose for kinks and...


I have had this problem with two of my previous washers a top loader and front loader.Each time it was a faulty pump that drains the water from the tub after the wash cycle is complete. If the water does not drain from the tub the machine will not go to the spin cycle. Both of my washers were 5 or 6 years old when this occurred. If the washer is only 5 months old it should be under the manufactures warranty. Good Luck.

Nov 12, 2010 | General Electric WBB2090G Top Load Washer

1 Answer

No water during any cycle.


if no water is coming in how is it agitating?is it filling at the beginning,then it starts to wash the clothes,now does it drain and then it won't fill again,send the model number and more info,

Jul 02, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer won't wash


Hi!
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

May 30, 2009 | GE Washing Machines

1 Answer

Frigidaire (LTF2940E) Washer starts, stops, starts, stops...


The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Washer will not agitate or spin


HI,

you can view this site to have some ideas about your agitator problem.

http://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin/agitator-woes

any further question let me know.

thanks,

Mar 29, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

Creda machine won't agitate with clothes in it


Your load is prob to heavy for the older washer. it just doesnt have the power to handle it no more. time to replace it, sorry.

Jul 30, 2007 | Creda W120VW Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940E Gallery 3.5 Cu. Ft. King Size Front Loading Washer Logo

Related Topics:

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...