Question about KitchenAid Architect KGCP484KSS Gas Cooktop

1 Answer

KitchenAid Stovetop with grill and griddle - KGCP484KSS0

I have a 48" stovetop with grill and griddle, and my grill is acting up. I had to replace the ignitor about 6 months ago, and it was working fine until recently. Now it ignites when set to Lite/High, but when I turn it down to medium, or low, about 5 seconds later you can hear the gas valve shut off. Seems like it works fine at High as long as the ignitor stays on. I am afraid that this will just make it burn out again though. I cannot find any thermal sensor like on a gas furnace. I thought this would be the same, but there is no sign of anything testing the temperature. Any ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 222 Answers

Hi im gerbee, try to clean the sensor valve by using a scott brite, the sensor place in the side wen the flame is on like a gold metal, 2nd try to adjust the flame control by using a plat or + screw,u see it at the gas control knot on top the small screw.adjust to high flame is touch the sensor valve.sory for my english.tnx gerbee i hope i help u

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The indicator light for the stovetop remains on despite all the knobs for each element in the off position. One of the elements is still getting power and heating slightly despite all controls in the


Hello friend, thanks for your post!

I see that the indicator for your cooktop continues to remain on for your Frigidaire range. It sounds like it could be a potential issue with your switches or control panel. I would recommend a reset on your range which you can do by flipping the household circuit breaker off for ten minutes. I hope this is helpful. -Matt

Oct 11, 2014 | Frigidaire Gas & Electric Stove/Oven/Range...

1 Answer

My Jenn-air stovetop won't stop sparking. It goes


yes it causing a false ground
giving the ignitor a false gorund will make it fire
it should calm down or you can turn the flame on and let it dry

Oct 09, 2009 | Cooktops

1 Answer

Plastic spoon melted on ceran stovetop. Used a


We Use Debruce Polish on all our cooktops. Debruce also works on stainless steel and polished granite, marble, porcelain, formica and glass. DeBruce is non-toxic odor-less and eco-friendly. You can get DeBruce on line at debrucepolish.com.

Aug 24, 2009 | Whirlpool RCS3014 Electric Cooktop

2 Answers

Spark ignitors on gas stovetop wont stop sparking


Make sure yo haven't spilled liquid on the ignitor becuase this will cuase all ignitors to spark constantly. If all is dry, the spark module must be replaced.

Feb 15, 2009 | Cooktops

1 Answer

Stovetop stays hot when burners are not on


Is it a glass top. If it is, glass will absorb the heat. It will cool off after some time. That is normal.

Dec 18, 2008 | Maytag 30 in. Admiral LGC1330 Gas Cooktop

1 Answer

Gas stovetop burner - continuous clicking


WHEN CLEANING YOUR BURNERS YOU HAVE PROBABLY MOVED THE IRON TOPS-READJUST AND YOU WILL FIND THE CLICKING WILL STOP.

Sep 18, 2008 | Cooktops

1 Answer

Wiring size


yes that's normal only the power source coming in needa #8 then its distributed to all other burners so the stove does not need heavier thanks the appliance doc

Sep 14, 2008 | Cooktops

2 Answers

Electric stovetop disconnection


Can you provide specific model number information ? That would help me to help you...

Sep 13, 2008 | Cooktops

1 Answer

Gas cooktop vent code


planning to install a 30" stovetop natural gas.need to know if i need a vent to the outside, it has 4 burners

Nov 07, 2007 | Cooktops

Not finding what you are looking for?
KitchenAid Architect KGCP484KSS Gas Cooktop Logo

767 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Cooktops Experts

Dale Copeland
Dale Copeland

Level 2 Expert

102 Answers

freddyfox

Level 2 Expert

236 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you a KitchenAid Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...