Question about Epson Stylus CX4800 All-In-One InkJet Printer
I type a letter or something else to be printed and it will not work. But when i turn on the computer again it will start printing and depending on how many times i hit the print button before i turned it off it will print all of them. I cannot find my disk to reboot the program either what can i do to fix it.
It maybe the spool settings are incorrect. You can easily uninstal the printer to set back to factory default, by uninstalling in add/remove software and disconnecting printer from usb port.(It may say documents are pending, ignore and delete) Download driver from here if you have lost installation disc. http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=27566&data=237EA0F2CDB90E9EFC108A9D38B0E2A2E601901E3494AEE9FAF7F774D281BE84 Install driver then re connect printer when prompted or after installation has completed. Try again and hopefully it should print first time.
Posted on Jan 20, 2007
Tips for a great answer:
A quick fix for most communication errors can be
achieved by resetting the printer and/or rebooting the PC. Simply disconnect
the printer from your computer. Reboot your pc. Unplug and re-plug the printer
into the power source to reset it. When the printer turns on, reconnect it to
your computer. Then try to print again once the computer fully recognizes the
However, if you're trying print but the print status screen only goes partial, try to follow the steps below to fix the issue:
1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the
print spooler service)
2. Browse to your windows\system32\spool\PRINTERS\
folder. You should see files there ending in .SPL and .SHD created around the
time you tried to print - delete these files.
3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the
print spooler service)
4. Double click the printer icon in the lower-right
corner of your taskbar to examine your print job queue and browse to View ->
Refresh. Try print again to verify that the problem is fixed.
Should you still need assistance, please leave a comment to my response and I'll get back to you.
Oct 13, 2011 | Lexmark X1150 All-In-One InkJet Printer
Mar 21, 2011 | HP Printers & Copiers
Head cleaning is mechanical process, printing is electrical process. If nothing at all ink out/spray from head in printing process, problem with electricity. Damage board or short circuit at head cable. Check board first, may be some component "burn". It is suggested to contacted Epson customer support before further damage occurs.
Please check this bellow tutorial for more details of print head cleaning:-
However check the link bellow for the user guide to your printer, kindly go through it where it gives detailed instructions of various problems along with cleaning of printhead,may be you have performed something wrong to assemble/install the printer after cleaning the print head or some connection problem.
Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com
Mar 12, 2011 | Epson Stylus Photo R1800 InkJet Printer
Mar 03, 2011 | Canon PIXMA iP3000 InkJet Photo Printer
Jan 18, 2011 | HP LaserJet 4100n Printer
Jan 13, 2011 | Epson Stylus Photo R200 InkJet Printer
Jan 13, 2011 | HP DeskJet 895cxi InkJet Printer
Dec 11, 2010 | HP OfficeJet 7310 All-In-One InkJet...
Dec 08, 2010 | HP OfficeJet 7410 All-In-One InkJet...
Dec 08, 2010 | Lexmark E260dn Laser Printer
349 people viewed this question
Usually answered in minutes!