Question about Washing Machines

1 Answer

I need to know the drum capacity of the Maytag LAT9593 washer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

29 INCHES I F IM NOT MISTAKEN

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag legacy series washer


The drive motor which spins the drum is connected to the drum by a rubber belt. Sounds like the belt is burned through. Make sure you can spin the inside tub by hand to verify that the tub can turn freely before you replace the belt. The hum is from the drive motor just spinning freely.

Sep 02, 2016 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag Neptune washer , when I turn it on for a 35 min wash , it works for about 12 min , then tunes off , with a lc on it , ? it just sets there and does nothing ,


"lc" may mean "load capacity" meaning too much weight in the drum. Wash time may be variable, and the load amount too! Experiment with you "wash time" feature, it may be for lighter loads ONLY. Get a user guide for your machine would be my call.....

Apr 05, 2015 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Have a Maytag Model LAT9593 that filled with water, but wont do anything. No noise, wont move, nothing. HELP?


check the lid switch,if not working replace. Timer could also be a problem with model.

Sep 11, 2014 | Maytag Washing Machines

1 Answer

Just trying to find out drum capacity of my maytag heavy duty super capacity 7 cycle washer. Please help


Check the tag where you find the model and serial number, they often list it there. Your owners manual should tell you as well. You might have to call whirlpool (maytag), I cannot find the capacity listed on the tech info. Good luck.

Sep 23, 2010 | Maytag LAT2600A Top Load Washer

1 Answer

I have Maytag LS7800 stackables and am happy with the capacity. I am purchasing side by side machines. What is the capacity of the LS7800?


The washer is leaking. Whenever it starts filling water. I checked the hoses they are all fine. It seems to me it's leaking from behind the drum where the water comes in. I couldn't see behind the drum, should I and can I take the top off and see if there is a clip on those hoses coming in

May 28, 2010 | Maytag Washing Machines

2 Answers

Maytag super capacity washer #SAV 4655 AWW Makes a verry loud squeel in spin cycle only. Does not leak any water or oil.


This can be a symptom of drum bearing wear. A quick check for wear is to see if the inner drum moves up and down relative to the fixed outer drum. It should only move a minute amount. If it moves more than a milli metre or two, it is probably worn bearings. You can obtain bearing kits for most makes. If it is making unusual noises while washing too, check there is not a wire or similar object trapped half way into one of the drum holes. A high pitched whine is sometimes caused by the motor bearings (but most brush/commutator motors whine a bit anyway on higher speeds, it is normal). Oil sparingly so as not to contaminate the carbon brushes.

Aug 28, 2009 | Washing Machines

1 Answer

Maytag washer


Many of the maytag toploaders have a rubber fill hose at the top of the outer drum.
Sometimes if the machine is fully loaded (or overloaded), during the spin cycle if clothes are above the top of the drum they can actually knock the rubber flange of the hose out of the drum. Then when the machine fills with water, it will dump it down the outside of the tub and it will appear that the water is leaking from the top and side of the drum... Fix it by snapping the fill hose flange back into the hole in the top part of the drum... let me know how you do or need more help...

Mar 23, 2009 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

Does not agitate


in the top of the agitator is 6 little dog ears very inexpensive and some what easy to remove your local appliance parts store should be able to show you how to replace them. just pull the agitator out and take it with you....goodluck

Jan 04, 2009 | Maytag LAT2300 Top Load Washer

2 Answers

What is the drum capacity size on the orig maytag neptune washer?


Drum size or capacity for the Neptune Model Number MAH4000AWW is 3.4

Jan 03, 2009 | Maytag Neptune Washer

1 Answer

Clanking, sparking sound coming from washer


Need to know a little more info. Need to know if this noise starts when you first turn it on (during the fill up cycle), once the actual washer starts (wash cycle) or when it goes into spin cycle.


Jun 11, 2008 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...