Question about Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC)

1 Answer

I have cable modem along with the Linksys wireless - G Broadband Router. Added another PC to my home. Purchased Linksys compact wireless-G USB adapter. Installation went fine and able to connect to the internet. However, when you aren' t using it or the computer goes in sleep mode inorder to reconnect to the internet you have to restart the computer. What do I do to make it stay connected?

Posted by on

  • Desktopsbyduck-Computers

    WHAT OPERATING SYSTEM ARE YOU RUNNING??VISTA??

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 100 Answers

You should have an RJ-45 cable connected from your ADSL modem to your router's internet RJ-45 plug then download network magic or similar software to input your user name and password on the router. this way you'll have internet even if your computer is turned off.

Posted on Dec 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS THE MODEM


The WBR-1310 is just a router - you will also need a modem - the modem is the component that connects to your telephone line or to the cable providers cable - to get broadband into your home

http://en.wikipedia.org/wiki/Modem

you would connect the modem to this router in order to share your broadband service amoungst devices or to get wireless

Jul 13, 2014 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

Wireless adapter will connect to router for a while, then connection quits. Sometimes it stays on for a while - other times not for very long. Lights on the modem stay on but connection does not return -...


Hi there, sounds like you need to sync your modem and router. First turn off the power to the modem, then to the router. After a few minutes reinstall the power to the Modem then to the Router. Restart your computer and see if you now can connect. Good Luck...

Oct 22, 2009 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

I have broadband cable service. My cable modem ic connected to a Linksys Dual band wireless router. My computer is then connected to the wireless router on USB port 2. My Link sys VOIP is connected to the...


First unplug your router, then unplug your modem and for 10 seconds. Next plug the modem back in and wait it to reboot(on mine this a series of 4 lights that light up in sequence, when the 4th light stops flashing, reboot is complete). Finally plug your router back in.

Sep 09, 2009 | Linksys Ultra RangePlus Dual-Band...

1 Answer

USB Broadband to wireless router through desktop PC


If I get you right you are useing a 3g Internet connection and have a router wich conets the 2 computers together, the problem is that you can't share the internet connection.
Without any information about the operateing systems I can tell you the idea:
First you need to disable DHCP server on the router and use static IP addresses on both PC, the IP address should be something like

PC1:
IP: 192.168.0.2
Network mask:255.255.255.0

PC2:
IP: 192.168.0.3
Network mask: 255.255.255.0
Default gateway: 192.168.0.2

In this IP configuration above PC1 has the 3g modem connected.
This was the easy part, hard part is to share the internet connection on the network, that's a little different ritual on every operateing system, try to use google to get your specific one.


However there's a much more easier way to solve all your problems if you can't make it work, but it costs money. All you need to buy is a 3G router and that will do the same thing for you what your old router did.
I did a little search for you on Australian Ebay to see what you can get.
But I'm sure you have your own cheapbfavourite source of computer hardware as well.


Hope this will help you sorting out your porblem.

Regards
Imre

Nov 26, 2008 | Sabrent USB 2.0 NT-USB20 Ethernet Adapter

1 Answer

SMC7901BRA Modem + Router Cannot connect


The Linksys router can be communicated with by going to Start>Run>type 'http://192.168.1.1' and when the logon screen appears use 'linksys' for username and 'admin' for the password. There you can reset defaults, view status, configure all router functions, et al, including restore defaults. Pressing the little reset button has reset levels that vary with the amount of time it is pressed -basically discharging a capacitive charge. Remember that cable modems use DHCP whereas DSL uses PPPoE. ~Steve

Oct 18, 2008 | SMC WIRELESS-G SMCWPICG 802.11G EZCONNECT...

1 Answer

D-Link DWL-G510 Connected but no packets


Hi,
According to the user guide for your motorola broadband modem it doesnot support wirless capability , ie it can only hook your computers to the interenet using the wire. refer the following link

http://broadband.motorola.com/consumers/products/SB5101/downloads/SB5101_UG_EN.pdf

What is required , is additional pair of hardware ie.
1. Wireless Router(eg linksys or netgear)
or
2.Router/broadband modem(given by the ISP)

Your connection would then be configured through the wireless router , that would give you wireless capability.

Refer to the following link , it gives you the a step by step guide to setting up the wireless connection .
http://www.oreillynet.com/pub/a/wireless/2003/03/21/home_wifi.html

Best of luck .....

Thanks
mandeep

PS Do let me know if you need more assitance.

May 12, 2008 | D-Link AirPlus G DWL-G510 802.11g/b...

1 Answer

Remote pc cannot access wireless


You can do a reset on your router. All computers must be must be getting its connection from your router. Your wired computer must be getting an ip address from the router(example is 192.168.1.x). You can then access the router page using your browser by typing the default gateway(example 192.168.x.1). This will take you to the router configuration page. You can set up the wireless network and your wireless network can now support more than 2 wireless computers.

Mar 14, 2008 | Network & Wireless Adapters

1 Answer

DSL modem and Linksys Wireless Router not working together anymore


if i were to guess you are probably a PPPoE user with a dynamic IP address.

possible config

Dec 18, 2007 | Network & Wireless Adapters

1 Answer

How to set up network on belkin G+ wireless usb adapter


do you have a Wireless Router + Broadband modem?

This is like a base station to which your remote wireless node communicates (to get connected to your home network and internet.

something like this http://catalog.belkin.com/IWCatProductPage.process?Product_Id=187337 for an ADSL connection.

If you are on cable, you can either get a Router similar to the one above (but for cable) http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1138056788757&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=8875739789B01

or if your Cable modem has LAN ports you may just be able to use an "Access Point" to add Wireless capabilities. http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1126536803676&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=0367639789B22

Oct 14, 2007 | Belkin (F5D7050) 802.11a/g/b Wireless...

Not finding what you are looking for?
Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC) Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a Linksys Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...