Question about Hitachi 43FDX01B TV

1 Answer

Commercial skip/blackouts Hitachi 43fdx01b skips over commercials. it ONLY happens at commercials. Regular programmes work fine. it flickers and screen blacks out and volume goes in and out.. but ONLY during commercials.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 236 Answers
Re: Commercial skip/blackouts

Sounds like you're blessed to have a tv like that! Seriously: Some sets have settings that will cut down the sound during a commercial. Haveyou looked at your owner's manual? This tv may have setting to cut out the picture also when commercials come on. From a technical view point generally commercials have stronger signals than regular programming. This may be overloading your set. If this is the case, then you need to have it checked by good technician. A poorly operating power supply (not regulating properly) could possibly cause a problem like this. Also automatic gain control circuits could be not working properly. Stargazer

Posted on Jan 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hitachi L26DPo4u now only works in black and white

check your color setting by going display if problem not there then you need to change your display tune which built in your tv internal side its a small machine like a box. just change it it will work fine.below 1 link add if want then you can help by donate and you can spread it with your friends circle for help me Please Help Me To Get Out Of Debt wish you will help

Jun 06, 2014 | Hitachi 43FDX01B TV

1 Answer

After a power flicker our TV Has a large black square in the middle of the screen. Problem is that the commercials are AOK but as soon as regular programming box. HELP!!!PLEASE!!!

You have the closed-captioning turned on and set to "text" mode. It probably got set this way because of the flicker. Use the remote (or front panel menu buttons if this set has them) to get into the closed-caption settings. Turn captioning off and the box will be gone.

In case you're curious, the reason this happens is that the set clears the screen where the text will be displayed, but there's no text. On programs or channels without captioning the box disappears.

Jan 27, 2010 | Standard (CRT) Televisions

1 Answer

Color has changed to green tint

    According to the system the problem in your projection is convergence and the solution is to replace the IC STK's.The part Number is CZ01341. Change the IC STK both and your TV work fine again.And for parts please see the link below.


Jan 09, 2010 | Hitachi 43FDX01B TV

1 Answer

I have a hitachi 43FDX10B ultrascand HD rear

well it seems to me that you need to call the manufacturer to see how to reset the pixels for that tv. it seems someone has taking a magnet or something like that to the tv screen

Nov 29, 2009 | Hitachi 43FDX01B TV

2 Answers

Convergence on Hitachi 43fdx01B not working

ik04,ik05:stk392-110(replaced with:stk392-150)resistors:rk46,54:1,5ohm.,rk42,50:2,2ohm.,rk58:3,3ohm.,rk62:1,8ohm..try make order in "MCMelectronics".,partstore.,bdent.

Jul 09, 2009 | Hitachi 43FDX01B TV

1 Answer

Remote will not change the volume

Is the front funtion button works in the TV the it could be a bad remote controller(the button switch inside) :)

Apr 14, 2009 | Hitachi 43FDX01B TV

1 Answer

Picture goes Black

that is easy one go to options menu on video look for cc or closed caption option and turn that off

Jan 12, 2008 | Hitachi 43FDX01B TV

1 Answer

Hitachi skips over commercials & flickers

If by saying the "aspect ratio changes" you mean the picture shrinks from top and bottom, I would suspect an intermittent short inside one of your picture tubes. The commercial skip function is not causing a problem here. It is the rapid change from dark to light that I believe is putting an extra strain on a weak or defective picture tube.

Jan 18, 2007 | Hitachi 43FDX01B TV

1 Answer

Purplish-reddish flicker on Hitachi

It seems you might have cold solder connections on the picture tube socket or on the picture tube drive board. If your not a tech please call someone to assist you with repair as you can be seriously hurt by the HI voltage insiode this set an or cauae more problems with the set. Good Luck

Aug 03, 2006 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66587 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Hitachi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides