Question about Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television

2 Answers

Panasonic PT-53wx53g will not turn on

My set will not power on, it will click and then the power light will flash 5 times.

Posted by on

  • Anonymous Dec 01, 2008

    my tv has the same problem. Turn it on power goes off and light blinks 5 times

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Sorry to disagree with the previous hinter, 3 FLASHES is a convergence problem for your model set. This data is direct from the Panasonic manual.

5 flashes is a DG board problem. Unlikely the manual is wrong on their website... (Never hurts to change the convergence ICs anyway) However, the board can only be rebuilt by Panasonic at the Elgin, Illinois plant. You might be able to find a board at a distributor, but anyway you look at it the thing's pretty expensive.

Look on the "A" board for corrosion damage or on the separate plug-in DG board. I've seen moisture condense off the CRT chassis ( or a possible CRT leak) and drip directly on the DG board flatpacks.

Mark

Posted on Nov 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

Just click below for convergence repair kit;

Posted on Nov 29, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY PT-53WX53G turns off when powered on. The


Thats the error for convergence failure. Heres a link to the repair kit for your model which contains the parts and the CD with detailed instructions.
http://servicemanuals.vstore.ca/product_info.php/pName/panasonic-projection-tv-convergence-repair-kit-1/cName/convergence-repair-kits

Jul 06, 2010 | Panasonic PT-53WX54 53" Rear Projection...

1 Answer

Black screen


how many times does the red light flash?
Techman

May 16, 2010 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Panasonic pt-4743g


CK hori out put Transistor, next to or behind that part is a small blue capacitor high voltage 2k volts see if it has burt pin hole if so replace it also resolder convergence plugins and FBT.Your STKs could need replacing they are big black ICs will have part number on them if 110s use 180s Call Mats for parts 1-800-628-`1118

Aug 14, 2009 | Panasonic PT-51HX42 51" Rear Projection...

1 Answer

5 flash then TV turns off


I am pretty sure the DG-board is the same as the PC board you have to replace. check this out:

http://www.encompassparts.com/products/?TNP2AA126S

May 27, 2009 | Panasonic Televison & Video

1 Answer

Panasonic pt-53wx53g tries to turn on but goes right off


That is indicating that the convergence circuits have shutdown the set. You will need new Convergence ICs. They should be STK392-110 or STK392-120 either number works the 120 being the better chip. I will post a link where you can get the new ICs and they provide step by step instructions with pics so you can do the repair yourself. You will find your IC numbers under the section titled Convergence ICs just click on that and you will find your STK numbers.
http://servicemanuals.vstore.ca/

Mar 30, 2008 | Panasonic PT-53WX53 53" Rear Projection...

2 Answers

Panasonic PT-51HX43G no power, red light flashes


I have a Panasonic PT53TW53G projection tv that had the same problem for power .A terrific person gave us wonderful advice and it fixed our tv! We were told to replace the IC conversion amplifiers. On our model they are STK392-110 (your's may be different). We ordered the parts from www.electronix.com and they were only $12. for the two parts. We also had to purchase a soldering iron and de-soldering vac for removal/replacement of parts. Good Luck!

Feb 04, 2008 | Panasonic PT-53TW53 53" Rear Projection...

2 Answers

Power comes on then goes back off.


More than likely, the two convergence IC's have to be replaced.

Jan 28, 2007 | Panasonic PT-53WX53 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...