Question about Blueant Supertooth Light Bluetooth Speaker Car Kit

1 Answer

How to activate the name caller id on supertooth?

I need to know how to set up voice caller id?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Hi Kazgear,

Voice Dial:
Important: Be sure your phone supports the voice dialing function and that it is activated. Record at least one voice tag. (Please refer to the instructions in your phone’s user manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card!
1. Press the Accept Button (1) for 1 second.
2. A voice dial beep will be heard on the kit to prompt the user to say the voice
tag of the contact to call.
3. Say the voice tag exactly as how you recorded it.
4. The voice will be played back to you, and then the phone will dial the number automatically.

Her's a .pdf file of the user manual, which you can save to your computer:
http://www.blueantwireless.com/downloads/supertooth_light/supertooth_light_manual.pdf

Hope this helps :)
Season's Greetings!

Chris (ziraffa)

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change language on hx550?


The HX550 does not have language settings you can only turn on/off the Voice Prompts, you can also check for the Voice prompts option by doing the steps below..Press and hold the Call button while turning on the
headset to turn these features on/off:

• Reset to factory default
Caution: This action erases all pairing information
stored in your headset.
• Caller ID
• Voice prompts
• Multipoint (two phone) connections
• WBS (Wide-band Audio) on/off

Follow the voice prompts to make changes to these
settings.
Note: Some features are phone/network dependent.

Mark
Motorola Support
https://forums.motorola.com/pages/home

Feb 13, 2014 | Motorola Mobility H730 Bluetooth Headset

1 Answer

How can I use with with my iphone?


with the mic arm out when you press the green button it activates your phones built in voice dialing which is streamed through the device.

Dec 14, 2010 | Blueant Supertooth Light Bluetooth Speaker...

1 Answer

How do you change the language of the woman speaking?


Are you sure you are talking about the Supertooth Light? The supertooth light does not have an in built language as it relies on your phones built in voice dialing system? You may be referring to the supertooth 3?

Rylan

Dec 08, 2010 | Blueant Supertooth Light Bluetooth Speaker...

1 Answer

I have a BlueAnt Supertooth, has worked fine until lately. It still pairs no probs and I can hear the caller loud and clear, however they cannot hear my voice at all? Have tried resetting both Phone and...


I would pair the device with anohter model of phone and see if the issue carries across, by doing that you can isolate the specific source of the problem (phone or device). Do you happen to have a blackberry?

Aug 19, 2010 | Blueant Supertooth Light Bluetooth Speaker...

2 Answers

I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired...


Pairing Your BlueAntStep 2: Activate Pairing Mode on the Supertooth Light
  1. If the microphone arm is open, close it to turn the Supertooth Light off.
  2. Press and hold the answer button.
  3. With the answer button held down, open the microphone arm.
  4. The lights will start flashing red and blue, indicating that the Supertooth Light is in pairing mode.
You now need to activate Bluetooth

Apr 03, 2010 | Blueant Supertooth Light Bluetooth Speaker...

2 Answers

I just got this bt8010 have no idea how it works


You have to install the Jabra Control Center, and it will take you through the steps.

Sep 26, 2009 | Jabra BT8010 Wireless Headset

1 Answer

Cant get blueant headset to pair mode


I have the BlueAnt Supertooth 3 Voice ... you can find the manual at: http://www.blueant.com.au/manuals/s3/S3_manual.pdf. This needs you to hold the On button for 6 seconds (from Off), but the earlier version Supertooth needed you to press Off while turning it on I think. Perhaps the website can give you your required manual to help with your particular model. Good luck. The password for both models was 0000 (4 zeros).

Feb 22, 2009 | Blueant Blue Ant 091193 Supertooth II...

1 Answer

Need to find out how to set up caller id on supertooth 3


Hi Kazgear,

Voice Dial:
Important: Be sure your phone supports the voice dialing function and that it is activated. Record at least one voice tag. (Please refer to the instructions in your phone’s user manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card!
1. Press the Accept Button (1) for 1 second.
2. A voice dial beep will be heard on the kit to prompt the user to say the voice
tag of the contact to call.
3. Say the voice tag exactly as how you recorded it.
4. The voice will be played back to you, and then the phone will dial the number automatically.

Her's a .pdf file of the user manual, which you can save to your computer:
http://www.blueantwireless.com/downloads/supertooth_light/supertooth_light_manual.pdf

Hope this helps :)
Season's Greetings!

Chris (ziraffa)

Nov 29, 2008 | Blueant Supertooth Light Bluetooth Speaker...

2 Answers

Unable to connect voice dial


Hi marrick,

Voice Dial:
Important: Be sure your phone supports the voice dialing function andthat it is activated. Record at least one voice tag. (Please refer tothe instructions in your phone’s user manual.) Note: Voice dialingentries must be stored in the phone’s memory, not on the SIM card!
1. Press the Accept Button (1) for 1 second.
2. A voice dial beep will be heard on the kit to prompt the user to say the voice
tag of the contact to call.
3. Say the voice tag exactly as how you recorded it.
4. The voice will be played back to you, and then the phone will dial the number automatically.

Her's a .pdf file of the user manual, which you can save to your computer:
http://www.blueantwireless.com/downloads/supertooth_light/supertooth_light_manual.pdf

Hope this helps :)
Season's Greetings!

Chris (ziraffa)

Nov 21, 2008 | Blueant Supertooth Light Bluetooth Speaker...

1 Answer

Cell samsung SGH-F250 with bluetooth motorola h500


ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to be able to establish a Bluetooth connection
between your phone and your SuperTooth kit as well as with other Bluetooth devices.
1.
Press Menu > Settings > Bluetooth > Activation > On.
2.
Press Back as many times as needed to return to standby mode.
PAIRING TO THE CELLULAR PHONE (Not possible while charging the SuperTooth)
Pairing will create a link or connection between the two Bluetooth devices - the SuperTooth kit and your phone.
1. Bring the cellular phone at about 20 cm from the SuperTooth.
2. Turn off the SuperTooth and wait for about 4 seconds.
3. While pressing the Answer Button, turn ON the SuperTooth by sliding the Power Switch to the right. Keep the Answer Button pressed for approximately 10 seconds until you hear a distinctive tone and the Bluetooth indicator LED changes from blinking blue to alternately blinking of red and blue. The SuperTooth is now in pairing mode.
4. While the SuperTooth is at pairing mode, access the Bluetooth menu of your phone. Press Menu > Settings > Bluetooth > My devices > Search new device. The phone will then search for pairable devices until it displays them in the list.
5. Highlight SuperTooth then press Select.
6. Enter PIN “0000” then press Ok. (Wait until “Paired with …“ and “Connected” will be shown briefly.)
7. Press Back as many times as needed to return to standby mode. Pairing is successful if the alternating red/blue lights of Bluetooth Indicator stops and then change to plain blinking blue. Normally, the phone would also show briefly on its display if it’s already paired and connected to SuperTooth or if pairing with it failed.
The SuperTooth kit is now ready to use.

Nov 15, 2008 | Motorola Mobility H500 Wireless Headset

Not finding what you are looking for?
Blueant Supertooth Light Bluetooth Speaker Car Kit Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blueant Headsets Experts

Iron
Iron

Level 3 Expert

3018 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

aliasger yq

Level 2 Expert

213 Answers

Are you a Blueant Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...