Question about Canon PowerShot SD750 / IXUS 75 Digital Camera

1 Answer

Transferring images to computer

No images transferred

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Canon Master
  • 96,372 Answers

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Posted on Aug 18, 2012

5 Suggested Answers

SOURCE: Can't Transfer images!

cant transfer pictures 2 computer

Posted on Dec 22, 2007

richard191
  • 691 Answers

SOURCE: My canon power shot SD960 IS has always transfered

Hello

Thank you for using FixYa for your problem

Check the USB cable, put it into a different port on the computer

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Posted on Dec 03, 2009

  • 9 Answers

SOURCE: I have all the softwares installed in my computer.

Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...
It seems to be directing the pictures to a non-existing Folder !

Posted on Dec 10, 2009

  • 96372 Answers

SOURCE: it doesnt transfer images to

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use ZoomBrowser or any other photo cataloging program.

Posted on Jul 05, 2011

  • 661 Answers

SOURCE: when i transfer pohtos to computer no problem but

Hi jhrobertszxy,

In this case you need to make sure that the photos are copied in the same directory from which you transfer photos to your computer.

Also it could be the case in some cameras that when you rename the files in a specific format , only then the camera would read it , or discard it as just another image file which does not belong to the camera.

Try renaming the file in a format that your camera saves the files , usually.

Hope this helps..:) Let me know in case you have any queries.

Posted on Aug 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I try to download most recent pictures I am forced to download all that are on camera


It depends on what software you are using to transfer photos from the camera to your computer.
If you install and use the "Camera Window" transfer software Canon included with the camera, you will see you have three modes to choose from, including the option to transfer just the photos on your camera that have not yet been transferred.

Connect the camera with a USB cable to your computer.
Power up the camera.
The computer will detect the camera, and open a dialog box offering you a choice of programs on your computer that can handle photo transfers.

If you choose the Camera Window software, it will open and present a menu with three choices of action. The first option is, "Import images from Camera." Select this.

Another submenu opens presenting these three options:

1. Import Untransferred images. (this is what you said you want)
2. Select images to Import. (manually select just certain ones)
3. Import All images (automatically transfers every image on the card)

Menu screenshot, Canon's "Camera Window" transfer software2d13ae76-841e-450d-995d-43cd3e2dd7e6.png
Camera Window is just one of many available image transfer applications you could use. They all do essentially the same three things outlined above, including "Import Untransferred images."

Canon included a couple other utility programs on the CD that came with your Powershot A490 camera. One of them, "Zoom Broswer EX" enables you to reload photos from your computer, back on to your camera's image card, if you want to do that.

Jun 04, 2014 | Canon PowerShot A490 Digital Camera

1 Answer

EOS utility not tranfering all images on card


You are better off to simply remove the card and either use your built in card reader or obtain a external USB card reader and transfer your images that way. All you have to do is open 2 "My Computer" windows. Simply drag your photos from your card to your C: drive.

Dec 06, 2012 | Canon EOS 40D Digital SLR Camera Digital...

1 Answer

SD card not transfering raw files to computer completely


Please remove the SD card from the camera. Connect the SD card to the computer using the external memory card reader and then transfer all the images in the computer or laptop. Then try to open all the images.

Feb 20, 2012 | Nikon D80 Digital Camera

1 Answer

My camera id D5000. Once i connect it to nikon transfer, there will be a green light that keeps flashing on my camera. My nikon transfer does not sense my camera and i can't transfer my photos.


Try re-installing the Nikon transfer software on your computer. Have you also just tried using the computer's image software to transfer images (or just copy and paste from the camera to the desktop)?

Hiram
Photo Tech Repair Service
110 East 13th Street
New York, NY 10003
212-673-8400

Jul 05, 2011 | Nikon D60 Digital Camera

1 Answer

Transfer software not reading images on device


download or update your driver for you camera. then open your software, turn on camera, and then hook up via usb.

Jul 20, 2009 | HP Photosmart M425 Digital Camera

1 Answer

Transferring images from Olympus Master Folder


must be transferred to a computer folder then the cd

Jul 24, 2008 | Olympus FE-210 Digital Camera

1 Answer

I would like to transfer images back from my computer to my Flash Card so I can transfer the images to a DVD player. Is this possible?


Transfering shouldn't be a problem. But why transfer from your computer to a Flash Card (I'm assuming Compact Flash Card) to transfer to a DVD player? You could easily just transfer the images straight from the computer to a DVDisk so that it can play in a DVD player.

Jul 15, 2008 | Olympus Digital Cameras

1 Answer

No pictures


Have you checked the HP hep site?
Here is their suggestion
Introduction This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable. Transferring the images Follow the steps below to transfer images from the camera to a Windows XP computer. Step one: Connect the camera to the computer
  1. Turn off the camera.
  2. The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer. Figure 1: Connect the USB cable c00878070.gif
  3. Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Step two: Transfer the images Choose one of the following methods to transfer the image files: Method one: Transfer images with the HP Photosmart software
  1. Make sure the HP Photosmart software is installed on the computer. If the software is loaded, then go to step 2. If the software is not loaded, click here to upgrade to the latest version of imaging and printing software (in English).
  2. If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
  3. Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer. Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
  4. When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.
Method two: Transfer images without the HP Photosmart software If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP. Follow the steps below to transfer images.
  1. Turn on the camera. Windows will automatically launch a program to transfer the images.
  2. When the images have finished transferring, disconnect the camera from the computer.
  3. If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
    1. While in Live View , press the Live View/Playbackc00591915.gif button, and then press the Menu/OKc00280209.gif button.
    2. Scroll to the Setup Menuc00595863.gif using the left/right arrow c00280208.gif buttons.
    3. Use the up/down arrow c00280207.gif buttons to scroll through the Setup Menu to highlight the USB option.
    4. Use the left/right arrow c00280208.gif buttons to change the setting to Digital Camera and then press the Menu/OKc00280209.gif button.
    5. To exit from the Setup Menu , press the Live View/Playbackc00591915.gif button.
  4. Reconnect the camera to the computer.

Mar 06, 2008 | HP Photosmart M415 Digital Camera

1 Answer

How to?.....


You should be able to transfer the images directly to your computer without transfering them to you memory stick duo. Have you tried connecting the camera to your computer and retrieving the images? If you would rather have the images on your camera on your memory stick duo, then remove the memory stick duo connect the camera to your computer, copy the images off of the camera, turn the camera off, put the memory stick duo back into the camera, plug the camera back in, then transfer the images that you just transfered from the cybershot to your computer back to the camera. They should copy directly to the memory stick duo.

Feb 24, 2008 | Digital Cameras

1 Answer

Can't Transfer images!


cant transfer pictures 2 computer

Oct 24, 2007 | Canon PowerShot A510 Digital Camera

Not finding what you are looking for?
Canon PowerShot SD750 / IXUS 75 Digital Camera Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...