Question about PC Desktops

1 Answer

Printer cartridge not being recognized - PC Desktops

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

Is it a genuine manufacturer's cartridge or some aftermarket? cartridges have small chips in them and aftermarket ones often will not work. You can take it out turn off printer and then power it back on and try to put it back in and hope it recognises it. If it's an original manufacturer's cartridge contact them they will usually replace without issue.

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell v305 printer allignment problem


Hello Michelle,

You are using Dell Series 9 ink cartridges, correct?

If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 9 black cartridge and then reseat it. I would then take out the color Dell Series 9 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)
photo cartridge = black side(left side) color cartridge = color side(right side)

It's possible to get a Dell Series 9 ink cartridge with a bad sensor. I would take these back to the place of purchase for a replacement.

Bhautesh,

Jan 30, 2014 | Dell PC Desktops

1 Answer

Finding compatible upgrade to cpu 870


Instructions

1

Select the ink cartridge specific to your printer. Canon inks are versatile, so your selection may be as simple as choosing between black, color or a multi-pack with black and color cartridges.
2

Turn on your Canon printer. The switch is generally located on the top right hand side of the printer. Open the printer's lid.
3

Wait a moment. The cartridge carrier will automatically disengage.
4

Put your hand behind the existing ink cartridge and pull the cartridge towards you until it pops out. Dispose of or recycle the used cartridge.
5

Carefully pull the tape off the new cartridge.
6

Position the new cartridge into the cartridge carrier. Make sure it is facing the correct position.
7

Press the cartridge carrier gently until it clicks into place. Some cartridges have indicators to demonstrate that they are properly positioned.
8

Close the printer's lid. Print a test page to ensure everything is working properly.

Jan 10, 2013 | Dell Studio XPS 8100 PC Desktop

2 Answers

My epson t13 printer doesnt go printing cannot detect the cartridge what should i do?


To rectify this error with your printer, first of all, you need to snap the cartridge in and out a few times. If this doesn't work, you need to remove the printer cartridge from the printer and then clean off the foil contacts. You need to be careful while doing this and do not wipe the nozzles from where the ink comes out. Insert the cartridge and switch on the printer. Now your problem might be fixed. If this does not work, it is better to inform the manufacturer or contact online technical support experts.

Mar 19, 2011 | PC Desktops

1 Answer

We have installed a new Colour cartridge and followed the steps. Yes, it clicked. After we press ok, it goes back to telling us to install the cartridge. We have completed this process over many times now...


Solution 1:
A lot of printer cartridges have a built in chip that the printer reads. If you are not using the printers brand name refills, this will sometimes lead to the cartridge not being recognized by the printer.

Solution 2:
Additionally, some printers when they have become worn ( seen a lot of use ) have also been known to not recognize the refill cartrige after instalation. The second problem cause, although not a popular solution, can only be fixed by purchasing a new printer.

I hope you have found this to be helpful. Please rate/vote! Thank You!

Jan 02, 2011 | PC Desktops

1 Answer

Hi Folks: I would appreciate any help and suggestions: HP DesignJet 1055CM error 0A0020 006501D1 Thanks, Paul


"Error in calibrating the APS sensor"

APS= Air Pressure System - it provides air pressure to pump in to the ink cartridges, thus pumping ink to the printheads through the ink tubes.

First things to try
- Remove all Ink cartridges.
- Power down printer.
- Power on.
- Place cartridges in ink supply station, check if they are recognized.

- Replace the one cartridge that is almost empty.

- Check all cables and air tubes in the ink supply station. (you need to remove left cover of printer)
Make sure they are all properly connected and not damaged.
Make sure the air tubes are free running - NOT pinched or bent!

- Lastly,
When all above fails, replace faulty APS sensor and / or pressure valve.

Oct 30, 2010 | PC Desktops

1 Answer

Lexmark x5470


Let the ink settle in the cartridge for awhile. Make sure no ink is on the outside of the cartridge which adversely effects the signal to the printer.

Apr 14, 2009 | Dell Dimension 4500 + Lexmark Z35 Printer...

1 Answer

Printing


You need to run the printer through the cleaning cycle. What type of printer are you using? There may also be a required step that needs to be done in order for the printer to recognize the new cartridge.
If you need further help let me know.

If this solution was helpful please rate it.

Mar 20, 2009 | Sony VAIO Digital Studio PCV-RX660 PC...

2 Answers

Computer not talking with printer


First reboot the machine-- then if the red X is still there check for a paper jam-- and or empty ink cartridge(s)---

Then go into "Printers" and make sure YOUR printer has a CHECK mark next to it which means it is the default printer.

Mar 16, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

My computer recognizes I have a color cartridge but the color won't print.


check printers "PROPERTIES" , then go to "COLOR" , and check how is set and make the proper changes , hope this works , AJ

May 17, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...