- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I couldn't find a manual on the internet either.
You could try these 'resources' though
Visit the detecto official website (I couldn't find the manual there) and use the support tab at the left edge of thar page or find contact details and ask detecto for a manual. http://www.detecto.com/
Upon closer inspection, we noticed an S-hook had come unhooked. After much "tinkering" (it wasn't easy) my husband got the S-hook back in position, and that was it. Lesson learned, do not tilt the scale or move it carelessly....we almost "trashed" an expensive scale for the sake of an S-hook!
Depending on which error is coming up, you should probably get it in to a Digi-star service center. If it is error 2 or error 5 it will need to have the Eprom replaced. The total cost of the repair at Sioux Automation Center in Sioux Center, Iowa would be about 45$ depending on where it needs to be shipped back to. they can also send you a loaner so that you don't have any downtime. You can call them at 866-722-1488 and they will be able to explain it to you in a little more depth.
If the display is showing "partial digits" on the display, it means a scale is excessively shaken (sometimes during shipping) it's possible for the LCD to become partially separated from the PCB (Printed Circuit Board). On many models you can gently press on the LCD and it will reconnect. However on many scales it's difficult to reach the LCD (without removing the cover) and thus the scale will often have to be returned to the manufacturer for repair. Contact them at 1-800-326-6247 for the Conair appliance customer service center.
You must not be dehydrated - do not use first thing in the morning or immediately after a workout or after consuming alcohol. Use 3 hours after a meal and after voiding your bladder. Women may experience fluctuations with retaining water, and those on diuretics may see inaccurate readings. You need to weigh yourself without clothes.