Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

I have a Maytag MAV6300AWW, it does not spin the clothes dry. It works fine otherwise. Any idea what the problem is. I saw an answer but it must be for another model. My model appears not to have carbon brushes or a circuit board.

Posted by on

  • csiaudio May 10, 2009

    moter runs but doesent spin mav6300ww

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 311 Answers

The plastic pulley is worn out typically at the bottom- most common issue. It needs to be replaced. Thanks, please leave feedback or contact me again for more info if you need it.

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Clothes still wet after spin


it is normal for clothes to be a bit wet after spin.approximately about 80 percent of your clothes will be dry after spin. you may hang your clothes to completely dry or place it inside a drier machine

Sep 03, 2015 | Maytag Bravos 3.8 Cu. Ft. Washer

1 Answer

Maytag atlantis washer mav6300aww drains water but does not spin


my maytag washer model #MAV6300AWW will not spin out during cycle but can turn it back to spin and will spin out

May 30, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Hello,my name is David ,I have a Maytag washer maytag lsg7806aae


can you tell if the motor is turning,if so it could be your idler pulley and youve lost belt tension,otherwise it could be your motor start capacitor if motor spins freely with power and belt off

Sep 01, 2009 | Dryers

1 Answer

Spin cycle not working like it should


If the washer doesn't reach it's proper spin speed, the clothes may be wet at the end of the cycle. Since you have replaced the belt, it could be that you have a worn motor pulley or tub bearing. Check for damage to the pulley and shaft and for free play. Also make sure that there are no clothes or foreign objects caught between the inner and outer tubs or something causing friction on the drive train. Hope this helped.

Jul 16, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Neptune makes loud drums like sound 5 min before it stops.


its probably because of the way the clothes are in it. you have to make sure the clothes arent leaning to one side and that they are evenly set up. otherwise when it goes into the spin cycle itll lean and hit the side of the washers inside and make it shake and do what you said it was doing.

Jun 04, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Spins fine, but clothes still soaking wet


Clogged water pump. Not draing fast enough. If this is helpful, please post as such.

Feb 21, 2009 | Maytag Performa PAV2200

1 Answer

IFB Bosch washing machine.


I have an IFB washing maching it does not spin dry the clothes any solution

Mar 24, 2008 | Maytag Performa PAV2200

1 Answer

Washing machine problem


Sounds like the upper bearing located in the outer tub seal is bad. It takes very little play at this bearing to cause what you are describing.


b739f41.gifThe area of this picture you are interested in is the top left. This is the tub seal assy.

Dec 28, 2007 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Washer doesn't reliably spin dry clothes


more than likely your carbon brushes which are situated in your motor locatable by a single wire on each side of your motor going into a plastic casing that holds the carbon if it doesnt have carbon brushes than it will have a module which is about 4in in length and is a circuit board this will need replacing which in some cases is not cheap at all

Aug 15, 2007 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4638 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...