Question about Kodak 5500 ALL-IN-ONE PRINTER

2 Answers

Change printhead in 5500

How do I change printhead in kodak 5500 printer

Posted by on

  • dan1599 Feb 03, 2009

    I am trying to get my printhead out for the same problem. How do I?

  • g-money523 Feb 28, 2009

    +still get printhead out

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 203 Answers

To change the printer head on the Kodak 5500 AIO printer, you will need to do the following:

To remove the old printer head,

  1. Power on the printer.
  2. Lift up the lid to expose the printer head.
  3. Once the printer head moves to the middle, where you can get at it, then unplug the power cord to the printer.
  4. Remove the ink cartridges.
  5. With the printer head now empty, run your finder along the underside of the top of the printer head, all the way to the left side of the printer head.
  6. Push up with your finger where there is some give, and the shroud that holds the printer head will release the head.

To install the new head,

  1. Simply put it in place, and push forward with your finger on the sticker that shows a finger pushing on a sticker, and you will hear and feel it click into place.
  2. Reload your ink cartridges, close the lid, plug the printer back in and you're done.

Posted on Jan 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Hello,

Here is the link to a .pdf document which has a clear graphical representation of how to change print heads:


http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf


Thank you.

Posted on Nov 29, 2008

2 Suggested Answers

  • 40 Answers

SOURCE: Kodak printer 5500 will not print in black

Go to www.kodak.com/go/printheadsupport to get instructions how to remove the old printhead and on how to install the new one.

Posted on Nov 21, 2008

  • 40 Answers

SOURCE: Kodak printer 5500 will not print in black

go to kodak/go/printheadsupport for instructions on how to replace it.

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I haven't used my Kodak 5500 printer in a little over a week and now I'm trying to print out pictures and with a new black cartridge, it's like there is no black ink. However, I just printed out a word...


Since that you already did a good troubleshooting cleaning the printhead and calibrating It and replacing the printhead., I just want to ask this How many times you already replace a printhead if its newly installed it means the problem is in the printer itself and for that you need to call kodak for printer repair toll free 1 800 421 6699

Now if the replacement printhead is more than a month and you already did all the troubleshooting it means the nozzle of the printhead is clogged you need to call kodak for printhead replacement

GudlucK

Nov 04, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Fatal error 3809 on my printer: how to remove printhead kodak easyshare 5500


Push the button up on the upper left hand side of the printhead carriage. The printhead will pop out.

Oct 29, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

My kodak 5500 AIO easy share printer will not print black ink.


Hi,

follow the step by step solution from kodak.

Choose All-in-one printer and then Print quality and follow the further steps. I think it's a problem with your printhead.

Oct 11, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

I have the same problem of no black ink and a little color ink


upgrade the firmware of ur printer.go to kodak.com/go/printhead support.take out printhead and ink cartridges ,reseat them again.if problem still persists,call kodak @ 1800 421 6699. they will replace ur printhead free of cost

Jul 23, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Lousy Color - Lousy Printer


Kodak is sending me ANOTHER replacement printhead .... third replacement in 19 months.

Jul 18, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

5500 kodak printhead repacement


Above the thumb print in the printhead there is a button. Press button and printhead releases.

Jun 11, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak printer 5500 will not print in black


go to kodak/go/printheadsupport for instructions on how to replace it.

Dec 15, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Kodak printer 5500 will not print in black


Go to www.kodak.com/go/printheadsupport to get instructions how to remove the old printhead and on how to install the new one.

Nov 18, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Won't print in black


Your printhead might be dead. Call Kodak tech support and they will ship you a printhead with no charge.

Feb 03, 2008 | Kodak 5500 ALL-IN-ONE PRINTER

Not finding what you are looking for?
Kodak 5500 ALL-IN-ONE PRINTER Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...