Question about Televison & Video

2 Answers

Bpl TV STUDIO 25DX TV REMOTE SERVICE CODE

PICTURE STARTS DIMINISHING FROM TOP AND BOTTOM TOWARDS MIDDLE !
I GOT IT REPAIRED TWICE !
THEY COME AND USE SOME SERVICE CODES IN THE REMOTE AND SOLVE THIS !
THEY EVEN TOLD ME HOW TO SOLVE BUT I HAVE FULLY FORGOTTEN SINCE ITS ALMOST MANY MONTHS !
PLS LET ME KNOW URGENTLY !

Posted by on

  • 4 more comments 
  • arun_kc Nov 29, 2008

    BPL matrix tv with PIP model Studio 25dx

    It is just that sevice people fixes this problem using remote only !

    Pls let me know how to go to service mode in remote control !

  • ajaytp9176 Feb 20, 2009

    I Have BPL studio line 25 PIP ...
    the vertical height of display is shorten ..
    this can be set right using Remote only.
    i want bpl TV STUDIO 25DX TV REMOTE SERVICE CODE
    and how operate......
    procedure ....


  • dsbanna May 14, 2009

    i have also a ctv of bpl studio 25dx my tv's remote control is totaly finshed and in my local area market and also service point has on remote of that perticuler tv model so i want to purchase new remote from company or other market but i need original remote control

  • jason May 11, 2010

    that is not going to be fixed by the service menu!

    if the colors were off alignment then you could fix it in the service menu , but not when they are bowed in

    what kind of tv? make? model #?

  • ifteqar_alik
    ifteqar_alik Jan 13, 2013

    need service mode step by step no

  • angy_brownbe Apr 13, 2017

    ON the tv, press tv button twice, then press i button and then press stop button.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 346 Answers

Change the vertical ic that is the problem
repair must be done by a qualified tv repair personel

Posted on Dec 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Off the tv and on it again and press the blue button twice then the i button and then the tv button on the remote.
i.e double times Blue + i + tv
You should press it fast, the service mode will be displayed on the tv screen, there you can change the dimension.

Posted on Oct 13, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why has my picture stretched tall eg inch of top and bottomof picture cant find a remedy


Look on your remote for the button marked P. Size in the middle towards the bottom and select full or 16:9.

Feb 21, 2015 | Samsung LN40A550 LCD TV

2 Answers

Need code for sky remote to work with sanyo tv model number CE32LC4-B please?


Sky+ Remote Control Unit Programming Procedure Follow the steps below


1. Select any channel on the TV.
2. Point your Sky+ remote control away from the TV and press the tv button.
3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.
4. Input the 4 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.
5. Point the Sky+ remote control at the TV and try the volume button.

  • If this works try the other TV functions.
  • If these work then the correct code has been selected.
  • It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.

If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.

You can also Visit Sky's Official Remote Code Finder.


Common Sky Remote Codes for your TV

(For a more comprehensive list see our Sky Remote TV Code Checker)

Aiwa 0106
Akai 0098
Akura 0042
Alba 0043
Amstrad 0063
Baird 0117
Bang & Olufsen 0118
Bpl 0115
Beko 0125
Beon 0899
Brionvega 0147
Bush 0157
Crown 0225
Daewoo 0092
Decca 0244
Dual 0257
Ferguson 0293
Fidelity 0294
Finlandia 0296
Finlux 0297
Fisher 0154
Funai 0179
Genexxa 0330
Goldstar 0056
Goodmans 0335
Granada 0340
Grundig 0345
Harwood 0361
Hinari 0365
Hitachi 0145
Itt 0384
JVC 0053
Loewe 0442
Matsui 0477
Memorex 0037
Metz 0491
Minoka 0921
Mitsubishi 0150
Nei 0514
Nikkai 0528
Nokia 0536
Nordmende 0537
Orion 0549
Panasonic 0051
Philips 0081
Pioneer 0166
Protech 0595
Pye 0600
Roadstar 0625
Saba 0645
Saisho 0649
Salora 0651
Samsung 0060
Sanyo 0159
Schneider 0665
Seleco 0672
Sharp 0093
Siemens 0680
Sony 0000
Soundwave 0702
Tandy 0741
Tatung 0049
Techincs 0250
Telefunken 0757
Thomson 0771
Thorn 0772
Thorn-ferguson 0936
Toshiba 0156

Visit Sky's Official Remote Code Finder for your TV here.

Click the link to download a PDF containing more Sky Remote Codes

Ask for help finding a code for your television here Sky Remote in our forums.

Jan 19, 2013 | Televison & Video

1 Answer

Bpl c tv model no CV21AF1C service refar no


CV21AF1C TV i want to remote code plaese

Nov 20, 2010 | GPS

2 Answers

I want bpl tv service code


I want bpl tv liv 20 service code

Aug 20, 2010 | Televison & Video

4 Answers

Bpl service menu code


press one time display key and three times mute .service mode will open

Feb 27, 2010 | Hitachi C25-RF35S 25" TV

1 Answer

I have a sony kp-41t65 tv acting like computer screen out of whac


Projection sets have two very common problems outlined below.

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. The TV can also shut down when the convergence starts to fail.

Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith, RCA and others.

You can get more information and a DIY convergenece repair kit with instructions from TV Repair Kits using the link at the end of this article.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped or bowed
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngSOLUTION

You can see some more examples and find a fix using this link on Fixya

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 10, 2009 | Sony KP-41T65 41" Rear Projection...

1 Answer

BPL BC-9 SERVICE MODE DEFAUT SETTINGS FOR BPL FZR 21


after some of starting the tv picture become dull n picture disapper but tv doesnt switch off

Apr 17, 2009 | Televison & Video

2 Answers

Toshiba 55pj6db rear view projection tv


If the board was "repaired" the settings should not have changed. There is a particular order to performing a convergence alignment. Do a web search for the service manual that will document the specific steps you need to take. Search using the model number and the keyword "manual". It should be availabel for $10-$15.
Dan

Mar 17, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...