Question about Astar LTV-2701 27 in. HD-Ready LCD Television
My Astar TV has problems turning on for whatever reason. The green light will come on but the picture however will not. To get the TV to turn on I have to turn the main power off and on several times.
OK HERE'S THE DEAL WITH THE ASTAR YOU ALL SPEAK OF THE PERSON FROM SOLUTION 3 IS RIGHT IT'S A POWER SUPPLY ISSUE WE'VE GOT 130 OF THESE I'VE FIXED 40 OUT 44 POWER SUPPLIES. IF ANY OF YOU HAVE SOME SKILLS WITH SOLDERING. THE MAIN PROBLEM IS IN THE CAPACITORS. THERE ARE 3 SETS OF CAPACITORS THAT NEED TO BE REPLACED. 4 3300uf 35v, 8 2200uf 25v, 7 1000uf 10v. ONCE YOU REPLACE THESE YOU SHOULD BE GOOD TO GO. THE OTHER 4 WE HAVE PROBLEMS WITH ARE STILL POWER SUPPLY ISSUES BUT ALITTLE MORE IN DEPTH WILL POST WHEN WE FIGURE OUT THE PROBLEM.
Posted on Sep 26, 2007
This may be too old of a problem for anyone to still have one of these. I found that the computer control still functions, but, the screen circuitry warms up very slowly (like 20 minutes or more). If the TV changes to a mode that has no signal it times out and shuts down (See question about Invalid input message). The green light stays on and the screen dims. If you can get it in the right mode eventually streaks appear and tries to build a picture. Use the buttons on the front under the screen because when the TV gets this bad the remote won't be detected for several minutes. Locate the black switch on the back labeled 1 0. Flip it off and back on and full picture will return. The trick is knowing what mode its in. Change the capacitors as suggested
Posted on May 23, 2015
Hello? Do any one know where to get these original Astar parts?
Do any one know how many model of the Astar TV been make and the DVD including the portable? I worked in Astar Co as a eletronic tech before the company closed due to the bankruptcy.
I been help numbers of people call me every day please check my refencen. Any question call 323-767-6030.
Posted on Apr 17, 2009
I know I am late on this post but I had the same problem with an astar ltv-2601. I just replaced 8 puffed up(bad) capacitors in power supply and has been good since about 4 months. They went out of business because they copied philips design and were sued by them. You get what you pay for.
Posted on Apr 11, 2009
I sold the ASTAR for parts and bought a VIZIO over 1 yr. ago-no problem. Bought a 2nd VISIO over 6 mos. ago. and love 'em.
Dan, Glendale, AZ
Posted on Mar 05, 2009
Okay, replace all the components? is not always works?
How about after replace all the coponents still show no pictures, WHAT'S NEXT???? CAN SOME ONE ANSWER THAT?
But I can. I know about this astar products better than everyone. Any question? Call 323-767-6030.
Posted on Jan 17, 2009
EVERYONE LISTEN UP, REPLACE THE CAPACITORS, AND YOU'LL BE FINE. My 2701 was out of commission for 7 Months, and I just replaced the Capacitors. Now It was my first time doing it. Just reviewed some YOUtube videoson doing capacitor replacements/removal, and I was good to go. Just pay attention to where the Negative STRIP is on Capacitors and Solder away, and if you want an all in one solution, scan ebay for Desolder/Soldering Iron 40w/Solder Type in Soldering Desoldering and its about 15.00. GOOD TO GO
Posted on Feb 27, 2008
Eclip66 is right, ive opened up my Astar TV aswell and have taken a look at the power supply, all of the capacitors he mentioned have bubbled tops (means they are blown) or are leaking their electrolyte all over the board.. in addition to the capacitors he mentioned, there are 3 other near the center of the board with little plastic disks covering them.. i checked these using an ohm meter and found they were also bad (they charged WAY to slowly and were also leaking) so in addition to the 4x 3300uf 35v, 8x 2200uf 25v, 7x 1000uf 10v.. you need 3x 100uf 450wv caps as well. Im in the process of locating some replacement caps and am about to change them out, if this solution does not work, and i find more problems ill be sure to make an updated post.. happy soldering!
Posted on Jan 23, 2008
I worked for Astar Company as an electronics technician before they are closing down. I know all model of the Astar TV, the Astar portable and DVD player. Any question call 323-767-6030. Due to the heavy phone call and trying to resolve each problem. Remember, First come first serve only.
Posted on Mar 05, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Astar LTV-2701 27
Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.
I repair these power supplies. Write to email@example.com if you require further assistance.
Posted on Jul 03, 2009
Tips for a great answer:
Mar 05, 2009 | Astar LTV-2701 27 in. HD-Ready LCD...
Aug 28, 2008 | Astar LTV-3201 32 in. LCD Television
Dec 27, 2008 | Astar LTV-3201 32 in. LCD Television
Nov 17, 2008 | Astar LTV-3201 32 in. LCD Television
Sep 02, 2008 | Astar LTV-3201 32 in. LCD Television
Aug 28, 2008 | Astar LTV-20PW 20 in. EDTV-Ready LCD...
Jun 01, 2008 | Astar LTV-2701 27 in. HD-Ready LCD...
Nov 14, 2007 | Astar LTV-3201 32 in. LCD Television
3,551 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: