Question about HP xw6600 Workstation with 650W 80 PLUS Energy Efficient Chassis w/ LP2465 24-inch Flat Panel Moni... PC Desktop

3 Answers

My Hp desktop does not boot. It requires F1 key to be press. Why?

While booting the system does not boot properly. Amessage stating that 1720 - SMART hard Drive detects immenent failure. Failing Attribute: # 05

Posted by on

  • catchseun Feb 26, 2009

    How do I disable Smart feature for Hard drive in Bios

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

WHEN I START MY PC IT REQUIRES TO F1 FOR START PLEASE HELP ME

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

SMART could also be doing its job and is telling you your Drive is about to or has failed therefore not being mounted. Time for a new drive.

Posted on Nov 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

You have to disable SMART feature for Hard drive in BIOS....

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1720 smart hard drive detects imminent failure failing attr 05


go to hp website and download the latest firmware for your notebook

Nov 23, 2013 | HP 530 Notebook

1 Answer

How do I set a Compaq Presario SR1403WM back to Factory settings


Step 1:
While many problems with Compaq Presario computers can be solved by less drastic means, there are times when the best course of action is to set the computer back to its original factory default state. Issues with persistent viruses or spyware often require this drastic step, as do problems with a corrupt operating system. Learning how to restore your computer to its original state is an important troubleshooting tool.

Shut down your computer and restart it. Watch for the Compaq logo, then press the "F1" key to enter setup. Press the right arrow within setup to go to the Boot menu. Press the down arrow to access the "Boot Device Priority" option. Change the first boot device to CD-ROM by pressing the down arrow until "CD-ROM" is displayed. Eject the CD tray and place the recovery CD that came with your computer into the tray. If you do not have a recovery CD, you can order one directly from Hewlett Packard. Shut down and restart the computer. The Presario will automatically boot from the CD and begin the recovery process. Select the operating system your computer shipped with. Many Compaq recovery CDs support multiple operating systems, so be sure to choose the operating system your computer shipped with. Insert the operating system CD when prompted. Enter the license key for the operating system when prompted. The license key is typically found on a small tag located on the top or side of the computer.

Mar 10, 2013 | Computers & Internet

1 Answer

Install an operating system


You need to change boot options in BIOS. Press required F key during boot. Look on the screen since Function keys vary with systems. In boot options make optical drive (CD\DVD) 1st. Save and reboot. You should get "Press any key to boot from CD". Note: Some systems have an ad-hoc boot option during startup. Thus eliminating the need for BIOS change.

Nov 20, 2012 | HP Pavilion a1310n PC Desktop

1 Answer

How to make booting not to push F1


Hi, do you mean, making the pc boot straight to desktop without asking you to push the F1 key at the BIOS startup stage. to that i advice you boot into the BIOS setup and press F9 to reset your settings to default and press F10 to save it. then try again it will work.

Oct 17, 2012 | HP Compaq dc5100 Small Form Factor PC...

1 Answer

My desktop compaq presario s4300nx starts up , i can accses set up with f1 but cant start recovery with F10 however the F10 button works in setup, no good to me, ...i have recovery disks the pc just...


you will need a Windows boot disk / Windows install disk / WinXP disk to reboot the PC and install / or repair your OS

rescue disk will not boot your PC
to enable that you need to enter the BIOS, press F1, F2 or Del to enter BIOS , then you need to look for the BOOT seq in BIOS, change that to CD DVD drive as the 1st boot device, Save and Exit and insert the boot CD and restart
this should give you the solution

Dec 16, 2010 | HP Compaq Presario S4300NX (DF216A#ABA) PC...

1 Answer

How to restore the operating system, plz tell me the key to press while booting


As you have not exactly stated the model no so I would suggest the followoing

Acer (Aspire, ): Press [F2] or [Del] Immediately After Power Up
Acer (Altos 600 Server): Press [Ctrl]+[Alt]+[Esc] or [F1] During Boot (for Advanced Options)
Acer (Older PC): Press [F1] or [Ctrl]+[Alt]+[Esc] to Access BIOS

Please reply if you require any further information

Thanks

Oct 14, 2010 | Acer Aspire One PC Notebook

1 Answer

Hp 9695c wont boot only ht HP banner shows but wont go to the initialization


Press and hold down Shift key, when you hear the beep, until system boots.
If you dont time it right you will get a keyboard error, dont worry, just press F1 key and immediately hold your Shift key again.
Your system should boot into basic mode, then you need to check your system for virus or last software that may have been installed.

Nov 25, 2007 | HP Pavilion dv9000z Notebook

Not finding what you are looking for?
HP xw6600 Workstation with 650W 80 PLUS Energy Efficient Chassis w/ LP2465 24-inch Flat Panel Moni... PC Desktop Logo

1,675 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...