Question about InFocus SP-LAMP-017 Projector Lamp for LP540, LP640, C16

1 Answer

I HAVE INFOCUS LP600 PROJECTOR PURCHASED IN 2005 WARRANTY ALREADY OVER.& NOW POWER SUPPLY PROBLEM IS THERE I AM ALSO ELECTRONICS ENGINEER IF I GET THE SCHEMATIC DIA. FOR ASSY LVPS , I CAN ALSO REPAIR THE SAME INSTEAD OF PURCHASING COMPLETE POWER SUPPLY I WOULD LIKE TO KNOW CAN I GET THE POWER SUPPLY CKT. DIA

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace 4, 100 mfd capactor and 1 4.7mfd capactor. on the power supply board, if still nedd help call me at 408 685-7901
thanks

Shakeel

Posted on Feb 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C185 all light on what is the porblem


Make sure your lamp cover door is closed all of the way. Try reseating the lamp and then re-closing the access door.
http://www.projectorcentral.com/pdf/projector_manual_3354.pdf

Here is the manual, see if the lights match up.

Aug 30, 2016 | InFocus SP-LAMP-019 Lamp for IN32, IN34,...

1 Answer

How do I reset the lamp timer on my lp600 projector


You can't. You'll just have to make note of it's current reading just like an odometer of a car when you replace a new bulb.

Dec 06, 2010 | InFocus S/A DOOR LAMP, LP600 Projector...

1 Answer

InFocus LP600 - A vertical shadow on the Left-side covering about 20% of screen.


The light tunnel inside the "engine" is either out of alignment or the glue holding the tunnel together is coming unglued and 1 of the 4 sides has fallen in. There are 2 screws to adjust this if the tunnel is still intact. One or both screws can be accessed by opening the lamp door and then you have to remove a thin sticky cover. You will see 2 small screws that will have to be adjusted with a small torx (3) or allen. You will have to have the safety switch pushed in with something and adjust while the projector is on, using the most easily accessible screw, turn it towards the direction of the "banding". It should decrease. If not, turn the screw the other way. The screw that is not so easy to get to is for adjusting the banding the can appear across the top or bottom of the screen. If the banding gets worse or even starts to show diagonally across the screen, it is a good bet that the tunnel has collasped.

May 03, 2010 | InFocus SP-LAMP-019 Projector Lamp for...

1 Answer

Infocus lp420 powers on (can hear sound) but no


if you get no leds, it's the power supply. if you get fans, it may be the colorwheel. if the colorwheel is ok, it's the ballast.

Nov 28, 2009 | InFocus LP400, LP420 and LP425 (Not z)...

1 Answer

InFocus LP540 Power Supply Problem


most of infocus parts are oem and made by a company in taiwan that no longer makes power supplies, and many of the parts have their stock numbers and not neccesarily a common stock. the power supply, however, is in stock at infocus for about $65.

Jun 23, 2009 | InFocus SP-LAMP-017 Projector Lamp for...

1 Answer

Doest function.no image projection,fun does not function


fuse on ac filter board. if that's ok, there is a power supply issue.

May 31, 2009 | InFocus PROJECTOR LAMP, Projector Lamp FOR...

1 Answer

InFocus LP130 Projector has intermittent power off


go into the menu to find out the lamp hours. it could be the lamp, but if the projector shuts down and not just the lamp, there is either an overheating issue, or a power supply issue.

Mar 07, 2009 | InFocus LP130 Replacement Projector Lamp -...

1 Answer

I want to test my infocus lamp to know if it is burnt


Your lamp might be ok, but you power supply is dead. If your not seeing any led lights come on when the power cord is plugged in then your power supply is dead. I can fix this for you for less then it cost to send to infocus or to a repair shop. Ebay Id is Gtitubro

AIM - Gtitubro


Feb 12, 2009 | InFocus Lamp Projector Lamp for LP650,...

1 Answer

LP540 INFOCUS


good luck. not even the infocus authorized service centers get those. besides, they were made by another company that does not make power supplies antmore. and infocus doesn't have any new ones in stock. if you're getting no power at all, replace the mosfets. it works half of the time.

Sep 20, 2007 | InFocus SP-LAMP-017 Projector Lamp for...

Not finding what you are looking for?
InFocus SP-LAMP-017 Projector Lamp for LP540, LP640, C16 Logo

Related Topics:

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...