Question about IBM x3400 Server

1 Answer

Parity ceck 10000

What can I What must be done by me for Resolved the trouble check parity 10000 in server IBM,when for Install repeated????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Plz tell me ibm error parity chek 10000
.

Posted on Oct 31, 2013

3 Suggested Answers

info2u
  • 596 Answers

SOURCE: how to install windows server2003in ibm server x3400

The install is fairly easy. Before you begin make sure if you have SCSI adaptors installed have the drivers for them on hand. If you do not have these drivers you should download them to a 1.4MB floppy disk. When you are ready, put the Windows Server disk in the cd/dvd and reboot the IBM. Follow the instructions on screen and you shoud be fine. From start to finish it should take you about 1 1/2 hours to complete everything.

Good Luck
Franklin
C2Solutions

Posted on Jul 21, 2009

  • 1566 Answers

SOURCE: About ibm server x3400 drivers

You can download the drivers from IBM's website:

http://www.ibm.com/support/us/en/

Posted on Aug 31, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install Windows 2012 on IBM xSeries 346 server


check from the manufacturer which operating systems are compatible with your server

Mar 31, 2014 | IBM xSeries 346 Server

1 Answer

Parity error System Halted


A Parity error is a memory problem. With a server it is important to have matched sticks of memory. It may just be that one chip is slightly slow/fast compared to all the others. You just need to find it!

Apr 29, 2013 | Acer Altos G530 Server

1 Answer

I dont want mirroring


Hello,

Use RAID 1 (Striped) or RAID 5 (Striped w/Parity) Please consult your RAID hardware documents for information on configuring RAID.

Good Luck
C2Solutions

Jun 09, 2011 | IBM x3400 Server

1 Answer

An error code jfb0 Bus Eror - Data Parity Error Detected Parity Error The system is a Sun Blade 2000 What can I do to fix this


replace or remove whatever ram chip is faulty, that error refers to a crc check on ecc memory. Or you could just turn off ecc parity checking in the bios. But that simply defeats the object of having ecc memory in the first place

Feb 24, 2011 | SunBlade 150 (A41UPA19C256MBA) Server

1 Answer

I have IBM X3200 M3 7328 I7S Server i want to know that this server is supported to Windows 7 or not My Email ID : abhijitk4@gmail.com


Hi,

You can install the windows 7 on this server. But you cannot do it from the server guide since it will not contain. Try to install as normal method and check if the controller get detects . If it detects you can install it. Otherwise you need find the driver for it.

Thanks

Jan 25, 2011 | IBM System x3200 M2 Server

1 Answer

In my IBM X226 server 2 HDD became unavailable in RAID 5 configuration. now I have replaced the hard disks and rebuild process is continuing. 1962 operating system not found error message is being shown...


Raid level 5 gives you some redundancy in your raid however it only allows you to lose one hard drive, two hdd lost would not permit to recover from. the parity bit can rebuild one hard drive but not two, sorry your raid might be lost

Aug 15, 2010 | IBM xSeries 226 Server

1 Answer

Fatal error: controller monitor failed


Replace the flat cable on the motherboard of SAS1 to SAS2. Resolved.

Dec 09, 2009 | IBM x3400 Server

4 Answers

How to install windows server2003in ibm server x3400


The install is fairly easy. Before you begin make sure if you have SCSI adaptors installed have the drivers for them on hand. If you do not have these drivers you should download them to a 1.4MB floppy disk. When you are ready, put the Windows Server disk in the cd/dvd and reboot the IBM. Follow the instructions on screen and you shoud be fine. From start to finish it should take you about 1 1/2 hours to complete everything.

Good Luck
Franklin
C2Solutions

Jul 21, 2009 | IBM x3400 Server

1 Answer

IBM starting problem.


Hi , if your dont have any data, try to get the IBM Netfinity CD for 4000r which supporting the OS 2003. Usually IBM provide a cd on each NEtfinity server. Check on the IBM website for more details about your Server Compatibility on 2003 server. then proceed to re-intalled the OS.

Aug 10, 2007 | IBM Netfinity 4000R 8652 Server

Not finding what you are looking for?
IBM x3400 Server Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...