Question about Compaq Presario X1000 Notebook

1 Answer

COMPAQ PRESARIO X 1000 - NO DISPLAY

I am able to turn on the lap top but there is no display. Could anybody suggest tips or troubleshooting steps?

Posted by on

  • 3 more comments 
  • Jaspreet Makkar Nov 29, 2008

    I can see the machine turning on - there is no display at all - I doubt if machine is even booting or not :-(

  • Jaspreet Makkar Nov 29, 2008

    Well... laptop does boot up - IDE drive light blinks

  • Anonymous Dec 02, 2008

    i had the same problem the other day and was told to press and hold F6
    after pressing the power button. Keep holding the F6 until it beeps. If
    it doesn't work the first time. Turn off the computer again (cold boot)
    and keep trying and eventually give it a rest and try again later. It
    helps that the laptop is on a desk and stable. I was also told that
    this might be due to the graphics card not working properly or its
    cable or the card itself is loose. I know because when I tried the F6
    solution while holding it on my lap, it didn't work and even after I've
    powered it correctly, once I moved my laptop to another location the
    screen starts to flicker again and freezes my laptop. It's a pain, but
    it gave me an opportunity to back up all my files before it completely
    crashes. I am going to attempt to replace the graphics eventually, but
    for now the keeping my laptop on a desk and being immovable will do.Good luck

  • graynix Jan 05, 2009

    Turning the power on, I get no screen but hear two audio beeps.  I am sure the peeps have a troubleshooting meaning, but I do not know its meaning.

  • Sanchit Rasiya May 11, 2010

    hello,

    well big problem..

    i want to know what is the first screenshot which u see as u turn on the lappy..

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,785 Answers

Plz try by resiting the ram

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Compaq presario 700, the battery is good, lap top will not power on~


Hi...
there are many causes of such problems occur, among them are the fault of bios or motherboard problems. Perform troubleshooting to identify the cause of the problem. click the link below for troubleshooting steps.
http://www.fixya.com/support/r8599320-troubleshooting_error_messages_black


TQ

Sep 16, 2011 | Compaq Presario 700 470024-192 Notebook

1 Answer

I cannot get my lap top to show on the all with my projector


Laptop will often have a function key (usually F5) for cycling between built-in display, external monitor, and both. Try pressing F5. If that doesn't work and you have a "Fn" key (usually near the left Shift key) hold down Fn and press F5.

Oct 11, 2009 | Compaq Presario Notebook

1 Answer

Hp compaq nc 6320 display problem


hi
seen your problem.

try these following steps.

1. install the Graphic and display drivers again.

2.restart your system and check if it is fixed.

3.if not call the customer care and they will replace your display if it is under warranty.

if you find the solution helpfull rate me carefully.

Jul 02, 2009 | HP Compaq nc6320 Notebook

1 Answer

Video cord


Make sure the TV is configured properly first off, make sure it's one of the auxilaries that are selected. Now if you haven't already, you should usually press F-something to get your lappy on dual display mode (F8 usually). If that fails, you may have to ween through some of the display properties, which isn't a big deal, but would require more of a live chat session to go through, or more info on here and some patience :).

Dec 14, 2008 | Compaq Presario Notebook

1 Answer

Compaq 12xl300 notebook display issue


when u start thw lap top press F8 key untill u get menu then go to enable vga mode then set tresolution to 800*600 or 1024*768
aslo try safe mode and last knowsn good configurartion.

Oct 11, 2008 | Compaq Presario 12XL300 (199375-003) PC...

1 Answer

Display problem for c500 pressario series...


laptop should still be under warranty,,sounds like a Video processor problem,,contact Compaq or HP and get further instructions.

Oct 10, 2008 | HP Compaq Presario C500t Notebook

1 Answer

Need compaq presario C700 display drivers


Hi!

Go to this website and just follow the instructions and you should be able to download the drivers for you system.

http://h18000.www1.hp.com/cpq_support.html

Hope this helps. :)

Aug 20, 2008 | Compaq Presario 700 470024-192 Notebook

1 Answer

Compaq presario 700


Greetings,
My name is mark and I will be happy to assist you. Here are the steps to change the languages on your computer.
1.go to start then click on control panel.
2. go to languages change the display and desktop to the language you wish.
3. you do not change the "regional settings"

I hope this helps. If you need further assistance let me know.
Be mucho blessed,
Mark

Jul 02, 2008 | Compaq Presario 700 470024-192 Notebook

1 Answer

My compaq m2000 has problem with display


I have a Diagram of the Switch and some more info and tips on my Website re LCD Screens and troubleshooting. It could be worth Up dateing Your Bios and Your Graphics Drivers.
more info at: www.powerjackrepair.com
Hope this helps

Dec 15, 2007 | Compaq Presario M2000 Notebook

Not finding what you are looking for?
Compaq Presario X1000 Notebook Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PC Laptops Experts

John mullen

Level 2 Expert

245 Answers

Tony

Level 3 Expert

2598 Answers

hungoverrr

Level 1 Expert

5 Answers

Are you a Compaq PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...