My problem is i can't tell who is my crush is

^Customer care support service NUMBER +1--833^^272--0777,,,,,,,,CALL THEM. customer care support service NUMBER +1--833^^272--0777,,;;;;;;;;;;CALL THEM# Hi Mary, this is candy crush built in intervention your addicted to candy crush ! lol just playing :)
I don't know how to tell you to solve the problem personally, but there is the game tech support numbers. I am sure they can get you back in the game! Hope that helps, Have a great night!

Good Afternoon Gerald, thank you for your post!
I see that your Frigidaire refrigerator is only dispensing crushed ice not cubed ice. Your solenoid (which tells the dispenser crushed or cubed) might be frozen. You can defrost the solenoid by disabling power from it for at least one hour and then restoring power. If you continue to experience this issue you may need to have the solenoid replaced or the control panel and I would suggest having a professional technician out for proper repairs. Good luck with your refrigerator! -Matt

Hi Mary, this is candy crush built in intervention your addicted to candy crush ! lol just playing :)
I don't know how to tell you to solve the problem personally, but there is the game tech support numbers. I am sure they can get you back in the game! Hope that helps, Have a great night!
USA & Canada ##1-844-290-9924 Candy Crush Contact Number #1-844-290-9924 Candy crush technical ...

uninstall candy crush
then re-install candy crush

Here is the best solution. How to Beat Candy Crush Level 23

yes you can, there are can crushers that are made to also crush plastic bottles. You can tell which can crush plastic bottle because they usually come with a hole in the bottom for the cap and neck of the bottle to stick out when you are crushing them. This also helps to hold the bottle in place.

I have tired all day to play candy crush and it say encountered an error... what is the problem

It's really hard to live if you have a crush on someone.
Try to talk to them. Be nice. Invite him/her to a cup of coffee sometime.

Try to be yourself and talk to them. Find things you both can relate with.

Don't be a coward, tell your crush about how you like him/her. If they like you too, everything will be ok, if they don't it'll still be ok. Worst they could do is say that they don't like you. They wont make fun of you.

Don't hold this in like I did. It's been haunting me to this day, ever since.

He had to remove the pinion nut and drive flange to install the seal. He also should have installed a new crush collar. This caused the failure due to incorrect bearing preload. (Set by the new crush collar). You should contact the technician and tell him you know the pinion nut was removed IF the seal was replaced. Best of luck and I hope you get back on the road.

If you prefer ONLY cubes , remove the ice bin and 1 or 2 screws hold the long rod attached to the bin . Without this rod , you'll only get cubes . With the bin removed , the square hole where the rod inserts in the rear freezer wall , you'll see a square , white , plastic "gate" . Asolenoid with a plunger , raises this gate for cubed ice and keeps it lowerer for crushed ice . Usually this "gate" plunger , rusts , thereby replaceing the solenoid and plunger would have to be done . Without the rod on the bin , the inner flap would open automatically , dispensing cubed ice .