Hp M551 laserjet printer makes whistling noise when printing

To turn off the cleaning page print on your HP LaserJet M551 printer, you can try the following steps:

1. Open the printer's Embedded Web Server (EWS) by entering the IP address of your printer into a web browser. The IP address can be found on the printer's control panel or by printing a network configuration page.
2. Log in to the EWS using the default username and password (admin/admin).
3. Click on the "Settings" tab, then select "Service" from the drop-down menu.
4. In the "Service" section, click on "Service Pages."
5. In the "Service Pages" section, uncheck the box next to "Print after each manual duplex".
6. Click "Apply" to save the changes.
7. Close the EWS and test the printer to confirm that the cleaning page is no longer printed after each switch.

Note: The steps mentioned above may vary slightly depending on the printer's firmware version. If you're unable to access the EWS or if the steps don't work, you may want to consult the printer's user manual or contact HP support for further assistance.

The error message "50.2F.00" typically refers to a problem with the fuser assembly in an HP LaserJet 500 color M551 series printer. The fuser assembly is responsible for fusing toner to the paper, and this error can occur if the fuser is not functioning properly.
There are a few potential causes for this error message:

• The fuser may not be properly installed in the printer, in which case you should check to make sure that it is securely seated and connected.
• The fuser may be defective, which is most likely the case if the error message appears shortly after installing a new fuser. In this case, you may need to replace the fuser with a new one.
• There may be a problem with the printer's power supply, which is causing the fuser to malfunction. You should check the connections and ensure that the power supply is working properly.

It is also good idea to check for any firmware updates for your printer. Sometimes these updates can fix known issues.
The best thing to do is check the printer's manual for troubleshooting or HP Support for specific instructions for your printer. Also you can try to call the manufacturer support.

m551 error code 99.06.64

are you USB connected, you never said nor what windows you run.
zero inputs, but a code.

I think its kinda new? if you can read , there are many books on this Beast. no lack of them it seems..

https://support.hp.com/us-en/product/hp-laserjet-enterprise-500-color-printer-m551-series/4184772/manuals

it has its own printer web server page, go there yet and look for errors explained, 10x better that codes?
omg I found your pages. its under troubleshooting above

https://support.hp.com/us-en/product/hp-laserjet-enterprise-500-color-printer-m551-series/4184772/troubleshooting


my guess is your post as TYPO>? 99.09.64??????

i say read the last link about and learn to find the true error code
look that up and bingo.
it says HDD failure.

but if 06.99 is real, is it?
the ask at HP.com
HP has business forum, why not use that, on this expensive high end product, or H3ll CALL EM?

hp shows no such code
google non
if not a typo its the first time anyone ever posted for this.

why make sure that code is right and this time get it right.
best for you and x10 better helper chasing phantoms..

Turn printer off and unplug any network or usb cables. Restart printer, if it comes to ready then you may only need to update the firmware on the printer to solve your problem. Go to HP.com and download the current firmware for the 551 and copy it to a USB stick. In the menus on the printer go to Printer maintenance>upgrade firmware and then insert the usb key into the usb slot on top of printer. Screen will show the file that is on the usb key, press ok and wait for process to finish.

See this... http://h30499.www3.hp.com/t5/Printers-LaserJet/Hp-Laserjet-500-M551-error-code-98-01-01/td-p/5983333#.U6raidIg__8

i would check the duplex pathway for any debris that is stuck there

The noise is probably due to the print heads aligning and clicking. To try to make this noise a little quieter, clean and align the print heads.
Good luck!

Try substituting a new imaging drum. The problem may be a bad bearing.

the problem is cyan and yellow toner are low, u will change the cyan and yellow it will be cleared otherwise the will be empty u can't print any thing suppose one will empty other cartridge will not work

Jim,

This can be done as a network device, AFTER it's installed as a local printer. I know, it's nuts, but we're talking MSoft.

drivers for printer are unique to a PC, so make sure you have the best ones.