Fujitsu nightmare ok, ive tried to repair, and it freezes hafl way through, and now when i turn on the laptop once it goes past the fujitsu screen it reads NTLDR is missing, and just says press ctrl alt del to restart, what do i do!!!!! It wont even read the cd now!!

If your laptop appears to boot up and the hard disk LEDflashes, then the problem is probably a back light fault. This can be a faultyinverter or a faulty CCFL lamp. Please click on this link and follow myinstructions to identify the fault and possible fix :- http://www.fixya.com/support/r3598095-faulty_laptop_lcd_screen

that means that some cables might be cut and when you move your screen, the contact goes and comes up, the solution is to replace your screen, or you can open it and check the cables yourself, and try to repair it by detecting witch cable is causing the problem and fix it

Hi

It may be worth trying this

switch on and same time keep pressing the F8 key
hopefully it will take you to the options for repair

try last know good configuration or system restore back to when it was ok
or try to ask windows to repair

good luck

hope you can get sorted

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

http://www.fujitsu-pc-asia.com/drivers/spring05/n3510/audio/winxp/n3510_audio.zip

Hi here is a link copy and paste into top of broswer i know its not the right 1 but ive been on there web site looking for your laptop and could not find it just try to install ok most likey they will be same audio chip find all info at fujitsu hope this helps please rate

Ok,Try safe mode with command prompt,If you can get to the command prompt
Type these in one at a time and press enter ( let each one completely finish before typing the next one.)

Bootsect.exe /NT60 c:
Bootrec.exe /FixMbr
Bootrec.exe /FixBoot
Bootrec.exe /ScanOs

Bootrec.exe /RebuildBcd
+
bcdedit.exe /import C:\Boot\BCDBackup

Try to disconnect external peripherals if there is any. If no go, try to boot to safe mode. Turn the computer off, restart and tap F8 repeatedly after pushing the power button to turn it on. Choose safe mode. Once in the desktop, click start>run and type in "msconfig" without the quotation marks. Click ok. Click the 'startup' tab and click disable all. click apply. click close and then restart the computer. If it still doesn't work, post back.

Steven,

it could be a heat realted, can you get to the cpu cooler? most laptops i have worked on this is accessible by lifting the keyboard.

Give it a blow out with a compressed air can and see if that works, if not try lifting the cpu cooler and cleaning off old thermal paste and reapplying new.

Regards

Nick

-Try connecting External monitor, If the display appear the same you have some hardware issue ,common issue video card.
-If the display appear to be ok, It appears that you have LCD issue.-
-Try reseating the lcd cable or contact manufacturer to replace the lcd assembly.

ok, the dark006 user is right with the F11 on splash startup screen. you do not need any disks 4 it. if you have any more questions, please email me at meanness628@aim.com