My Epson Photo R230.....did not print anything ...I already clean it for more than 10 times.....what should i do.....? please help

Does a nozzle check show anything? Are the inks full and the nozzles clean?

take all cartridges out shut off then turn on make surethere is no obstructions where cartridges go replace them one at a time i found a piece of tape on mine would not print black and white removed it now it is fine

Is your Epson printer not printing? There are various reasons behind the issue Epson printer won't print.

When you have dried ink in a cartridge, paper jam in the tray, faulty printing system, outdated printer drivers, and much more.

You can easily fix the issue Epson printer, not printing using the following steps:
·Check printer ink cartridge
·Update printer drivers
·Clean Clogged print head nozzles

Follow the more steps and fix the Epson printer not printing issue instantly.

I can't say for sure but it sounds like your print head is permanantly clogged. I avoid Epson because they have a permanent print head unlike Hewlet Packard HP printers. I think there is a solution kit you can buy that runs a solvent through the print heads to clean them out. Look for something like that as a replacement print head typically costs more than a new printer. Hope that helps, Take care.

epson r230 print double edges printing result very bad please give me how o solve this problem.
thanks.
ashok kumar

please help me my printer epson r230 resete softwar need please help me

Your printer has reach its maximum count of cleaning and printing. This need to be reset using epson adjustment program. But before resetting make sure that you have replace the waste pad inside your printer or it is much better to point outside the hose where the waste ink goes out.

Epson R230 print slow at PHOTO, very slow at BEST PHOTO, if you do not need photo quality prints try printng at TEXT AND IMAGE for faster printing and the quality is still good. Also try to lower the resolution of that you are about to print, high the resoluton images takes longer time to print. Hope this will help you, Good luck!

The problem is waste ink around head sprayer (at (bottom plate of head). Turn of printer. Move head to center. Put wet tissue (with hot water) at head cleaning mechanic pad. Move head to parking position. wait till 10 minutes. check it. You can repeat 3 times.

http://www.efillink.com/Support/HowToWasteInkDrainR200.html