Question about Televison & Video

Open Question

Tuning in channels for portable TV NEC model No. N-3458

I have a portable TV (1999) NEC model No N-3458, but I dont know how to tune the channels in. Can you please help?

Posted by on

  • jmkiki64 Apr 03, 2009

    I have lost the manual and can't remember how to tune the channels

×

1 Suggested Answer

  • 3 Answers

SOURCE: Vason 10.4 inch portable tv tuning problem

I returned my original TV/DVD to the suppliers who then sent me a new one.
I experienced exactly the same tuning problem with the new TV.
The only way I could tune it, was by using the fine tune facility to find and store the missing stations. This took a lot of time and continuous button pushing, so patience is essential.
Once found and stored, the previously missing channels are perfect.
It would appear that the DVD player doesn't like DVD- recordings from my home recorder. If they are re-coded they work.
Anything recorded on DVD+ is fine.
In my opinion this is a good unit let down by a couple of niggling faults.

Posted on Mar 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just received a Coby TFTV992 9" portable TV. I'm trying to tune the TV channels without success.


1st click the "mode" button on the TV or remote then use the vol. up and down buttons to scroll around until you get to DTV mode then press "enter" on the remote you should get a message "please run channel auto scan" . click "Menu" on the remote the "Picture" screen will come up, keep clicking the vol. up button to scroll past "Audio" then "Setup" then to "Channel" then use the CH up or down buttons to scroll to "Air" click OK , then use the CH down button to scroll to "Scan all channels" then click the vol. up button. it then should start scanning, FYI you have to be fast!

Jan 07, 2013 | Coby Usa Coby Electronics TFTV992 9 Inch...

1 Answer

I am renting a house here in Ireland and the TV is a 19" Orion but there is no remote control to tune in the channels can you please help me


Hello
you haven't specified nothing about the model number of your Orion TV. it is needed for us to post a solution before you. Each and every models of TV has different proceeding for tuning. so repost your problem with model number or send me the mocdel number of your Orion Tv by FixYa. OK.

May 22, 2011 | Televison & Video

1 Answer

LG model NR CI-14F80FS Moved the TV for an elderly person,using the remote, how do I start the automatic re-tuning avrilmiller@btconnect.com


By pressing menu botton on remote then chose setup/then channel setup before presssing auto tune or channell auto programm you may choose air or cable option then you can go for channel auto programming and your supposed to be done.
hope that will help you
have a nice day
regards alan

May 14, 2010 | Televison & Video

1 Answer

Tune in channels


Switch TV on
Press “MENU” on remote until 3 blue arrows appear
Press “VOLUME” keys to tune up or down (shown on blue bar)
When required programme is tuned, input required Channel number (appears on 2 green lines at top) e.g. 02 or 14
Carry on tuning and allocating channel numbers
Select “MENU” to clear or wait until it clears by itself
Channels should now be tuned to allocated numbers

Feb 21, 2010 | Televison & Video

2 Answers

Cannot Tune TV through VCR


Hi,
I need model number and brand of your VCR and TV to suggest solution.
Thanks.

Jun 12, 2009 | Panasonic Televison & Video

1 Answer

Channel numbers above 13 do not come in. This started after a power failure. All numbers are received on another TV at that site. How do I program the stations that should be received?


Go into the TV's setup screen and set the tuning mode for "cable" or "CATV". It got set back to "air" after the power failure. When set for off-air tuning, only channels 2 through 13 tune properly. Set for cable and rescan channels and you'll be set.

Apr 07, 2009 | Televison & Video

1 Answer

Alba portable tv tuning set up?


its stuck on the same channel it says red gain at top of screen its not responding to remote control

Nov 02, 2008 | Televison & Video

1 Answer

Sony KV14T1U tuning


Press and hold for a few Seconds the 2nd Button from the left on the front of the TV. The auto tune menu will appear on the bottom right of the screen. Wait until it disappears and then check the channels by using the buttons on the remote.

May 20, 2008 | Televison & Video

1 Answer

Vason 10.4 inch portable tv tuning problem


I returned my original TV/DVD to the suppliers who then sent me a new one.
I experienced exactly the same tuning problem with the new TV.
The only way I could tune it, was by using the fine tune facility to find and store the missing stations. This took a lot of time and continuous button pushing, so patience is essential.
Once found and stored, the previously missing channels are perfect.
It would appear that the DVD player doesn't like DVD- recordings from my home recorder. If they are re-coded they work.
Anything recorded on DVD+ is fine.
In my opinion this is a good unit let down by a couple of niggling faults.

Feb 08, 2008 | Televison & Video

2 Answers

TUNING IN A TELEVISION


Please could you provide a Manufacturers name and the model of TV. One of us might be able to find a manual for you. Cheers.

Sep 28, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...