Question about Logitech Quickcam Chat Webcam

1 Answer

Hello, my problem is that when i plug on the webca (usb) the windows restarts itself. Thank you very much! E

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ESource USB keyboard. Why does it type duplicate letters?


Have you installed any (included) software for the keyboard? If you haven't, install the software and see if it works properly. If you have the software installed already, try to uninstall it and see if it works without it. If neither of that doesn't work, uninstall software and drivers altogether (via Device Manager) and restart the PC. The computer should recognise the keyboard by itself. After this: check that there are no driver conflicts (no yellow exclamation marks) in Device Manager.

Dec 31, 2015 | Computers & Internet

1 Answer

Samsung L100. How do I take pictures off camera itself? Before I got card, I took some photos and I cannot figure out how to take those picture from camera.


Hello there, Just plug the camera to your computer's usb port and turn it on and set it to review mode. Once the computer detected it as a new usb device, RIGHT click on your Windows start button and choose Explore or open Windows Explorer. Then click on My Computer or Computer from the left pane. Look for the drive letter associated to that camera then click on it to show the contents of the camera on the right. Browse thru the folders until you find the pictures. Once u found them, just copy and paste to your local drive. If you need furtherr assistance, please let me know. Thank you for using FixYa.

Jun 24, 2011 | Samsung L100 Digital Camera

1 Answer

Windows xp cannot detect kingston datatraveler II


Hello there,

Try plugging your kingston usb thumbdrive to a different usb port and see if the system detects it. If it does not, try restarting your computer then try it again. You can further isolate the problem by plugging the kingston to another computer's usb. If all did not work, then your usb thumbdrive is fried due to not being able to properly disconnecting it from the computer (doing a "safely remove").

Thank you for using FixYa. Merry Christmas.

Dec 25, 2010 | Computers & Internet

1 Answer

Hello, My computer is a dell labtop with windows XP. It will not allow me to plug in my usb for my camera or my new vivitar digital key chain usb to upload pictures. As soon as I plug the usb into the...


try connecting to a different usb port and if still that happens ...remove the motherboard drivers and restart the system and than plug in the camera if it doesnt restart install the drivers again from the dell support website ... support.dell.com u have to put in ur service tag and than down load the drivers required and see if the issue is resolved or not if not than u have to reinstall windows

Dec 24, 2010 | Computers & Internet

1 Answer

I have a HP Pavillion zv5000 model #zv5034 and it will not dectect my dedevice a Sansa Fuze mp3 player. what do I do? My opporating system is windows XP thank you


Suggestion 1:

Update Windows:
A lot of times, Windows updates will fix small problems like this. If you haven't updated your Windows OS in a while, it may help.

1. Click Start
2. Click All Programs
3. Select Windows Update

You will be taken to the Windows Updates site and it should be a simple process of updating and restarting.

After that is complete make sure you have the proper software installed that came with your Fuze and then attempt to plug in the Fuze.

Suggestion 2:

If that doesn't work, try updating your USB drivers.

Navigate to HP's Support site and search for available drivers for download. An updated driver might be available for USB. Follow the installation instructions, restart your machine and attempt to plug in the Fuze.

Suggestion 3:

If the Fuze is still not being recognized, find a different USB device, such as a USB printer or USB hard drive, plug it in and observe to find out if the computer will recognize it. If it does, it may mean that there is some sort of software conflict and the Fuze is not recognized as a known device.

When you plug it in, listen for the Windows sound that occurs when a new USB device has been plugged in. If you don't here it, the issue may be related to the USB port itself. Try each USB port on the computer and listen for the "new device" sound.

If you don't hear the sound in one, but you hear the sound on another, try using that one and see what happens.

I'm aware of the mass audience of people who have had annoying experiences with the Fuze and how difficult it can be to make it work, and I hope this isn't one of those cases, but if it is, I would attempt to get your money back and use it on a different MP3 player. The iPod series is excellent and becoming cheaper. The cheapest being the Shuffle at around $50. I use the 3rd Gen Nano and it hasn't skipped a beat for 2 years.

Hope this helps! Good luck.

Jun 24, 2009 | HP Pavilion ZV5000, ZV6000, ZX5000 Series...

1 Answer

Hp desk jet f380 not printing jobs piling up not printed


Hi,
  1. Remove this F380 printer drivers.
  2. Restart PC as required.
  3. Install the CD
  4. DO NOT plug in the USB cables yet.
  5. After running the HP software, plug in the USB cable as requested.
  6. the printer should be installed by itself.
  7. wait for sometime, and the HP software should ask you to restart the PC.
  8. After restart, try printing
Let us know if this works.

thank you.

Jan 04, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Hello.. I have a canon g6 problem...please help : O


What happens if you restart it and then plug it in?

Jun 22, 2008 | Canon PowerShot G6 Digital Camera

1 Answer

Dell photo printer 720


NO u just need first to UNISTALL driver then restart pc and install again from device menager not from setup

Oct 12, 2007 | Dell Inkjet 720 Printer

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...