Question about JVC RM-RL1 Remote Control

1 Answer

I TOUCHED SOMETHING ON THE REMOTE AND NOW THERE IS A BLACK BOX ACROSS THE BOTTEM OF THE SCREEN

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Try the net....find the model...there must be a trouble shooting page???

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen keeps going black then grey and white lines start to come across the screen.


This is not the fault with remote control. It is with your TV itself. Contact any service technician.
Gopakumar Gopalan Google

Mar 24, 2014 | Remote Controls

1 Answer

My RTI m2(?) fell off the table to the floor. The black cover dislodged and the screen also dislodged. It was still lit. When I replaced the screen the icons were lit with a pink band across the bottom of...


Sorry this remote can't be repair it is garbage,because the small display LCD screen panel it have mircro cracks and fractures in them and leaking chemicals radiation that why u able pink chemicals band across the the small display LCD screen panel.It time to buy another remote.

Sep 06, 2011 | Rti Technologies Rti T1 Remote Control

1 Answer

Remote will turn reciever off and on but no other function


Hi, my name is Cheri Torres and I am with DISH Network Customer Service. I came across your post recently and wanted to see if I could help. It sounds like your remote may need to be readdressed to your receiver and TV in order to control all other functions. In order to readdress the remote to your TV I would need the model number of the remote and the brand name of the TV. The model number of the remote should be located on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the instructions for addressing your remote to your DISH Network receiver box. If these instructions do not work for you and your remote is still only controlling the power on/off of the receiver you are going to need a replacement remote. If this is the case or if you need the instructions for addressing your remote to your TV please feel free to email me directly at Cheri.Torres@Dishnetwork.com and I would be happy to help further.

Instructions for addressing your remote to your receiver
  1. Go to System Info screen.You can do this by either pressing the system info button on the front of the receiver box once or by pressing the power button once and the channel up button once on the front of the receiver box.
  2. Once you are in the system info screen you will see Remote address or Primary remote address for TV1
  3. Hold down the SAT button until all mode lights light up.
  4. Enter a number between 1 and 15 using the numeric keypad on the remote. Change the number to something different then what is already listed in the small white square.
  5. Press the pound (#) button.
  6. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 4 will appear in the System Info screen under Remote Address.

Mar 30, 2011 | DISH Network 721 DVR Remote Control

1 Answer

I have a new dishnet remote and iwondered how to program it to my dish network receiver model 4500


Hi there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. I will list here for you the instructions for readdressing the remote to the 4500 DISH Network receiver after this post. I hope you find these instructions useful and if you have any further questions or concerns feel free to email me directly at Cheri.Torres@Dishnetwork.com. Thanks and have a great day!

Instructions for addressing the remote to the receiver box

  1. Go to System Info screen.You can do this by pressing the power button once and release and the channel up button once on the front of the receiver box. If the first option does not work you can also pull out the smart card.
  2. Once you are in the system info screen you will see remote address at the bottom of the screen.
  3. Hold down the SAT button until all mode lights light up.
  4. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number to something different then what is already listed next to remote address.
  5. Press the pound (#) button.
  6. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 4 will appear in the System Info screen under Remote Address.

Mar 28, 2011 | DISH Network IR Remote Control

1 Answer

My remote control for tv #2 does not respond and i want to know what to do. i bought a new one what should i do


Hi there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. If the old remote was not responding to your TV2 anymore you may want to try replacing the batteries first if that does not work the next step would be to try readdressing the remote to the receiver. You can try readdressing both remotes to get them to work with your DISH receiver box. I will list the instructions for readdressing your TV2 remote here for you. I hope you find these instructions useful and if you have any other questions or concerns feel free to email directly at Cheri.Torres@Dishnetwork.com.

Instructions for addressing the remote to the receiver
  1. Take your TV2 remote to your receiver box location.
  2. Go to System Info screen.You can do this by pressing the system info button once or by pressing the menu button twice on the TV1 remote.
  3. Once you are in the system info screen you will see primary remote address (TV1) and secondary remote address (TV2).
  4. Hold down the SAT button until all mode lights light up.
  5. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number in the small white square to something other then what is already listed.
  6. Press the pound (#) button.
  7. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 5 will appear in the System Info screen under Remote Address.

Mar 08, 2011 | DISH Network IR Remote Control

1 Answer

I just had my cable hooked up after i moved and my remote will not let me press select to watch cable even though everything else works on the remote.


Hey there, Cheri Torres with DISH Network Customer Service. I came across your post and wanted to see if I could help. It sounds like you may need to readdress remote to your DISH receiver box. Make sure that your remote is in SAT mode by pressing the SAT button once so that it lights up red. Once you have done this you will need to take your remote to the TV1 location in order to readdress it to the receiver if you are not already there. I will list here for you the instructions on readdressing the remote after this post. I hope you find this information useful and if it does not fix the issue please email me at Cheri.Torres@Dishnetwork.com and I will be happy to see what else we will need to do in order to fix this issue.

Instructions for addressing your remote to your DISH Receiver box
  1. Go to System Info screen. You can do this by pressing the system info button on the front of the receiver box or by pressing the power button once and the channel up button once on the front of the receiver box.
  2. Once you are in the system info screen you will see remote address or primary remote address(TV1) and secondary remote address(TV2).
  3. Hold down the SAT button until all mode lights light up.
  4. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number to something different then what is already listed in the little white square.
  5. Press the pound (#) button
  6. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 4 will appear in the System Info screen under Remote Address.

Feb 21, 2011 | DISH Network 721 DVR Remote Control

1 Answer

Sat button lights up and remote will not function


Hi, my name is Cheri Torres with DISH Network Customer Service I came across your post and wanted to see if I could help. It sounds like your remote may need to be readdressed to your receiver box. I will list here for you the instructions on readdressing your remote to your DISH receiver. Another thing you may want to check is the batteries, make sure they are in the remote correctly and that they are fresh batteries. If you have any further questions or concerns post back here or email me at Cheri.Torres@Dishnetwork.com and I will be happy to help! :)

Instructions for addressing remote to receiver

  1. Go to System Info screen. You can do this by either pressing the system info button on the front of the DISH receiver box or by pressing the power button once and the channel up button once on the front of the receiver. You may need to open the little door on the front right side of the receiver to locate the buttons.
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote. Change the number to something different then what is already listed in the white square.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.

Jan 20, 2011 | DISH Network IR Remote Control

1 Answer

I dont have a cable box just a cable into my tv my dish tv remote wont chage channel but turn off and on


Hi there, this is Cheri Torres with DISH Network customerservice. I came across your question and wanted to see if I could help. Itseems like your DISH Network remote is no longer addressed to your Dishreceiver box. There are a few steps that you can walk through to get yourremote working properly again, I will list these steps here for you here. Ihope you find these instructions useful if you have any further questions orconcerns please feel free to post back here or you can email me atCheri.Torres@Dishnetwork.com. :)

Addressing your remote to your receiver
  1. First you are going to take your (TV2) remote to the room where your receiver box is.
  2. Go to System Info scree. In order to get into the system info screen you can either press the system info button on the front of the receiver or you can press the power button once then the up arrow button once on the front of your DISH receiver box. If both of these options are not successful you can open the door on the front left side of the receiver and pull out the smart card. You do not need to reinsert the smart card until you have finished addressing the remote.
  3. Once you are in the system info you will see primary remote address (TV1) and secondary remote address (TV2). For your particular case you will look for secondary.
  4. Hold down the SAT button until all mode lights light up.
  5. Enter a number between 1 and 15 using the numeric keypad on the remote.Change the number to something different then what is already listed in the little white box.
  6. Press the pound (#) button
  7. Once the SAT button blinks three times, press record three times. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.

Jan 03, 2011 | DISH Network IR Remote Control

1 Answer

How to connect the 3.0 IR remote to control the receiver?


Hi there! This is Kimberly Escobar with DISH Network. I just ran across your post and would like to provide you with the information you need. IN order to program your remote to the receiver box the first thing you need to do is access the System Info screen, you can do this by pressing the Sys info button on the front of your receiver box if it has one, by pulling the smart card out, or by powering off the receiver and pressing the channel up button once, Once you are in the System Info screen down at the bottom you will see something that says remote address next to it you will have a white box with a number in it. To address the remote you need to press and hold the SAT button located at the top until all the other buttons light up in red once they do you will enter a number between 1-15 (different from the one already in the white box) after you enter the number you chose press the pound key (#) and record button 3 times, the SAT button should blink red 3 times after that try the remote it should work. You can also find more information and additional help on Dish network.com follow this link http://www.dishnetwork.com/SupportSection/remote-setup it will take you through the steps that need to be performed. If you need any additional help please feel free to contact us directly at 1800-333-DISH.

Jan 16, 2010 | DISH Network IR Remote Control

Not finding what you are looking for?
JVC RM-RL1 Remote Control Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68209 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...