Question about Onkyo TX-SR606 Receiver
Video works when connected directly from DVD or Sat Receiver using HDMI. When using the HDMI through the Onkyo unit, I get the sound but no video. Only HDMI Cables are used as per the wiring diagram. The setup screens do work and they show the default HDMI input setup. I have the HDMI cables connected as per this default set up.
Still doesn't work.
Is there some HDMI output enable selection somewhere?
For me, it was the Monitor Out setting that had defaulted back to Component. I remembered to change the individual inputs to HDMI - but had forgotten to set the Monitor Out to be HDMI.
Posted on Apr 30, 2010
This has already been mentioned before - the problem is probably due to a mis-matched input assignment. Check that the input assignment for the device hasn't been set at 'Componemt'; best is to leave it at '---' or set it to 'HDMI' if it is actually connected thru HDMI to the Receiver. All other input connections (composite or svideo) are automatically upconverted to HDMI by the Receiver. This should solve your problem. Good Luck!
Posted on Feb 15, 2009
Try checking the input assignment section and go to Component Video Input. Make sure DVD and CBL/SAT has" -----" on them to prevent conflict. Hope this helps. ^_^
Posted on Dec 03, 2008
Tips for a great answer:
Feb 19, 2010 | Onkyo TX-SR606 Receiver
Oct 03, 2009 | Onkyo TX-SR606 Receiver
Aug 10, 2009 | Onkyo TX-SR606 Receiver
Jul 02, 2009 | Onkyo TX-SR605 Receiver
Jun 16, 2009 | Onkyo TX-SR606 Receiver
Jun 11, 2009 | Onkyo TX-SR605 Receiver
Jan 11, 2009 | Onkyo TX-SR606 Receiver
Nov 16, 2008 | Onkyo TX-SR606 Receiver
Nov 04, 2007 | Onkyo TX-SR605 Receiver
3,523 people viewed this question
Usually answered in minutes!