Question about HP Thin Client - AMD Geode NX 1GHz - 256MB DDR SDRAM - 512MB Flash - Windows XP Embedded - Tower HP Com... Network Terminal

1 Answer

Com surrogate has stopped working

Whenever i open c drive, a dialog appears in which it is written that com surrogate has stopped working.

Posted by on

  • Anonymous Jan 26, 2009

    whenever i open c drive, a dialog appears in which it is written that com surrogate has stopped working and says it needs to close

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

Http://fileforum.betanews.com/detail/Vista-Codec-Package/1159994557/1

Just download this small program and everything should be just fine . I was having the same problem , ive been told that its because of nero or divx codecs , didnt unistalled anything just installed this program and my problem was solve !

Posted on May 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dear Mr. , I have VMware server and I create VM on it with WIN XP SP3 and install VSpace in XP, after that when I'm trying to connect NComputing devices with that machine it appears that machine in the...


Hello Rana,
Please recheck which model number you are working with, since what you are describing sounds like the L300 and not the L230. If it is the L300, then you may have initiated a firmware update from the console or from within the device. We'd be happy to walk you through this -- please contact us online or by phone by going to: http://www.ncomputing.com/techsupport

Nov 11, 2010 | NComputing L230 Network Terminal

1 Answer

How do i connect this terminal to windows 2003 server please give me the settings


Open Remote Desktop Connection loadTOCNode(2, 'summary'); To open Remote Desktop Connection, click Start, point to All Programs, point to Accessories, point to Communications, and then click Remote Desktop Connection.


Create a Terminal Services Connection loadTOCNode(2, 'summary'); To create a Terminal Services connection, follow these steps:
  1. Open Remote Desktop Connection.
  2. In the Computer box, type the computer name or the IP address of a terminal server or a computer that has Remote Desktop enabled.
    Note: To connect to the console session of the remote computer, type computername or IP address /console.
  3. Click Connect.
  4. In the Log On to Windows dialog box, type your user name, password, and domain (if necessary), and then click OK.

Save Connection Settings loadTOCNode(2, 'summary'); You can save a connection as a Remote Desktop protocol (.rdp) file. An .rdp file contains all the information for a connection to a terminal server, including the Options settings that were configured when the file was saved. You can customize any number of .rdp files, including files for connecting to the same server with different settings. For example, you can save a file that connects to MyServer in full screen mode and another file that connects to the same computer in 800×600 screen size.

To save your connection settings, follow these steps:
  1. Open Remote Desktop Connection, and then click Options.
  2. Specify the connection settings that you want for this connection.
  3. On the General tab, click Save As.
  4. In the File name box, type a file name for the saved connection file, and then click Save.
Note: To edit an .rdp file to change the connections settings it contains, click Start, click My Documents, right-click the file and then click Edit.


Open a Saved Connection loadTOCNode(2, 'summary'); To open a saved connection, follow these steps:
  1. Open Remote Desktop Connection, and then click Open.
  2. Double-click the .rdp file for the connection that you want to open.

Copy Files Between the Local Computer and the Remote Computer loadTOCNode(2, 'summary');
  1. Open Remote Desktop Connection.
  2. Type the computer name or the IP address of a terminal server or a computer that has Remote Desktop enabled.
  3. Click the Local Resources tab, select the Disk Drives check box, and then click Connect.
  4. Click Start on the task bar of the remote computer, and then click My Computer, or double-click the My Computer icon on the desktop of the remote computer.

    Note: The drives on the remote server appear with the drives on your local computer. Your local drives appear as driveletter on tsclient, where tsclient is the name assigned to your (local) computer.
  5. Locate the file that you want to copy, right-click the file, and then click Copy.
  6. Locate the folder where you want to paste the file, and then click Paste.

Log Off and End the Session loadTOCNode(2, 'summary'); To log off and end a session, follow these steps:
  1. In the Remote Desktop Connection window, click Start, and then click Shut Down.
  2. In the Shut Down Windows dialog box, click Log Off username, and then click OK.
Thankyou
Amit Bhardwaj

Skype Id:- amit.bhardwaj4

May 05, 2010 | VXL Instruments Itona CE Windows CE VIA...

2 Answers

NTLDR is missing in my computer


Missing NTLDR can be caused by any one of these problems :-

Computer is booting from a non-bootable source.
Computer hard disk drive is not properly setup in BIOS.
Corrupt NTLDR and/or NTDETECT.COM file.
Misconfiguration with the boot.ini file.
Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
New hard disk drive being added.
Corrupt boot sector / master boot record.
Seriously corrupted version of Windows 2000 or Windows XP.
Loose or Faulty IDE/EIDE hard disk drive cable.
Failing to enable USB keyboard support in the BIOS

With Windows XP follow these instructions
  1. Insert the Windows XP bootable CD into the computer.
  2. When prompted to press any key to boot from the CD, press any key.
  3. Once in the Windows XP setup menu press the "R" key to repair Windows.
  4. Log into your Windows installation by pressing the "1" key and pressing enter.
  5. You will then be prompted for your administrator password, enter that password.
  6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

    copy e:\i386\ntldr c:\
    copy e:\i386\ntdetect.com c:\
Once both of these files have been successfully copied, remove the CD from the computer and reboot.

If this doesn't work, then the last resort is to install Windows again, plus the computers device drivers and your programs.

Feb 11, 2010 | Network Terminals

1 Answer

Getting a message about shadowing my session


The program you are using is telling the terminal to accept a VNC request, as it will send date on the port open for VNC. So the terminal is asking you to accept the prompt to allow a remote machine to control your session.

You can set the program to ignore the VNC ports, so it wont get prompted. Failing that you should be able to change the terminals behavior to the requests by editing the wnos.ini to not allow VNC connections. I think that can be done from there. Check on the config generator for wyse terminals on technicalhelp.de to find the correct syntax.


Jun 23, 2009 | WYSE S10 (90210501) Network Terminal

1 Answer

Internet


Use a proxy service to enter the sites. Use one of the following links & enter your destination URL.

2. Use Google to load the cached (usually filter free) version of a website or proxy.
example: - goto google.com, and type in demonproxy or demonproxy.com - goto the first link by clicking on cached (not the real URL link). - type in the website you’re trying to goto in the URL bar and enjoy.
example - use http://home.myspace.com (instead of http://www.myspace.com). Other prefixes to try for myspace.com: browseusers. search. invite. mail. blog. invite. favorites. forum. groups. events. viewmorepics. music. classifieds. signup. chat. vids.
4. Install Circumventor - please read instructions carefully. 5. Block-Unblock your home network.

May 15, 2008 | Network Terminals

1 Answer

Funny UST scandal virus


its a virus infection... if you have updated viruscan database scan /cleaning it.. run it in safe mode..if not works, backup your important file and format your hard disk..

Apr 09, 2008 | Network Terminals

4 Answers

Neoware ca5


True, even if you reflash the system to bring it to a fresh state, it will still need a server to do anything reasonable.

Head over to http://www.neowareftp.com/ and click on the "Tech Support" link. A password dialog box will show up: [since it may violate TOS here I won't post that info, but it's readily available on the web.] Once in, click on the FlashRecovery link, then pick the flash that relates to your machine - CA5's are usually the CE versions. Download the file.

Now, this program will work on XP systems. Install the program and follow the directions. You'll need either a cheap hub, switch, or a simple crossover ethernet cable. Hook the thin client to one end, your PC to the other, run the tftpd32 program as described in the documentation, set up the thin client per documentation.

If all is done right, your thin client will grab an ip address from the tftpd32 program and you'll see the reflash menu. Pick the number corresponding to the proper reflash, and watch the machines do the rest.

When it's done, you'll have a pristine OS on your device.

now understand, these are made primarily for accessing terminal servers in businesses or schools or hospitals, so it may be useless unless you just want to do some primative web surfing (the CE version has an embedded version of IE5, no java, no flash, and probably no room to put it on that 16meg flash disk.)

But if you buy these devices for a accessing terminal servers, this will give you a clean client.

Jan 21, 2008 | Neoware Systems c50 Thin Client Network...

3 Answers

Hardware reset


Double-clicking the System icon in the Control Panel opens the System Info dialog box.You can use this dialog box to allocate thin client memory and reset the thin client to factory defaults.

The General tab contains a check box that allows you to reset the thin client to factory defaults (the check box is active for administrators only).

You can reset the thin client to factory default settings by selecting the *Reset the terminal to factory-default property settings* check box (the System Settings Change message displays and you can confirm and follow the instructions provided to reset the thin client).

Mar 01, 2007 | WYSE Winterm S30 Network Terminal

Not finding what you are looking for?
HP Thin Client - AMD Geode NX 1GHz - 256MB DDR SDRAM - 512MB Flash - Windows XP Embedded - Tower HP Com... Network Terminal Logo

Related Topics:

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Network Terminals Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Tony

Level 3 Expert

2598 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a HP Network Terminal Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...