Question about Televison & Video

Open Question

Aux channel interference

I have a 1996 Magnavox model # 27TS52 C103, Chassis # 27X602-00BB that has intermittent interference with thin streaky horizontal lines, with quick on and off white flashes, just on the AUX channel only! Problem does not occur on all other channels 2-99, which have excellent picture and sound. Problem still occurs with no inputs hooked up to the audio/video jack panel. All on screen menu options work fine. There is a removable A/V jack panel board on chassis and wonder if this could be defective.

Posted by on

5 Suggested Answers

  • 3 Answers

SOURCE: TV screen on video 2 and remote died

The only way your going to change the video mode is with the original remote. If you need another remote go to http://remotes.com or call 1800 remotes Theres a button on the upper left hand side of the remote called video mode. A universal most of the time will not work this function. You could ask around to your friends and buddies or relitives if anyone has a working Sanyo remote or go to a local retailer that sells Sanyo and see if he would let you borrow one for a little while so you can switch out of the video mode. Good Luck

Posted on Aug 20, 2006

  • 375 Answers

SOURCE: Programming AUX as a channel.

pick up a universal remote

Posted on Mar 28, 2008

  • 1 Answer

SOURCE: No Aux Channel but I have the yellow and White plugs in the front!

Take out the channel up button and use a small, long object (like a pencil or pen) and repeatly press the button under until AUX comes up.

Posted on Jun 19, 2008

SOURCE: No remote, cant get AUX channels

I have a STV2763 and no remote. I get to aux by pushing the channel up or down button on the TV to get to aux1 and aux2.

Posted on Oct 04, 2008

  • 2 Answers

SOURCE: RCA model F27252GY TV has no Video button or AUX channel for DVD

try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.

Nancy

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magnavox tv has intermittent pixelation and snow breaking through on picture on all channels. Have had cable service out twice to replace digital DVR box but still a problem. Brand new HDMI cable too.


If your TV is connected to the cable box with only an HDMI cable, the problem should either the cable company equipment or outside interference. A bad HDMI cable with cause intermittent or continuous complete loss of picture. Try plugging the HDMI cable from the cable box into a different TV (if you can borrow one) then you can prove if the problem is with the TV or the cable equipment. Maybe a neighbor has a ham radio that is causing interference? (They will have a tall antenna at there house, so easy to see.)

Dec 22, 2014 | Magnavox Televison & Video

1 Answer

Connection problems on a dvd\vcr combo


Did you check the channel selection is correct?

Sep 24, 2007 | Televison & Video

1 Answer

Is 60" Projection TV model 9P6034 C103 HD ready?


No, not in the sense that you can plug an HDMI connector into it. Let me know if you need more help. Thanks for using FixYa and for the generous rating.

hardrocko

Mar 19, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Trying to hook up my wii to an very old model phillips magnavox


I think you have two options here:

1-Maybe your TV aux input is the type where the AUX channel is before channel 2, or after whatever your highest channel number is. If so, you can access that AUX channel by either going channel UP or channel DOWN.

2-If that doesn't work, maybe it's worth the $5 for a cheap universal remote, that you can program, and thereby access the TV INPUT mode.

Hope this helps.

Mar 06, 2010 | Philips 19PR19 19" TV

1 Answer

Magnavox 27TS52 C103 Squiggley screen


look for swollen or vented 100mf/200v cap near fbt
change it with a 250v cap
ron

Jul 20, 2009 | Philips 27PT543S 27" TV

1 Answer

Need the remote code for a phillips dvd player


These are the codes printed in the owners manual for your dvd/vcr player.If they do not work you will have to contact Emerson and ask them for help getting the code. The contact number should have come with the instructions for the remote. Just give them the model number of you remote and the units model number and they should be able to help you. I hope this information helps you with your problem. Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00

Apr 25, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

Magnavox MWR10D6 can't record from camcorder wrong channel


OK...try this...plug your RCA cables from your camcorder into the RCA input jacks on the back of the recorder. If you have a VCR, it can be plugged into the coax input on the back of the recorder. Use the coax output and plug it into a RF modulator (about $20 at Wal Mart). Plug the RCA output cables from the recorder into the RF modulator as well (Don't ask me why, but it seems to work on mine). Connect a coax cable from the RF modulator to the TV. Make sure the TV and Recorder are both on the right channel. The RF modulator will have a channel switch to use channel 3 or 4 on the TV. Make sure the recorder is set to E1 (Rear). You can check this with the channel +/- buttons on the bottom right of the remote. Good luck.

Jan 06, 2008 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

Philips magnavox 25TS56


Same problem. The power button does not work. The volume and channel buttons turn the tv on. the tv then shuts its self off 15 seconds later. the red light blinks in second intervals while this happens.

Sep 16, 2006 | Philips Magnavox MS3252S 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...