Question about Foxconn (755A01-6ELRS) (K8S755A6ELRS) Motherboard

2 Answers

Help with motherboard

Hi, here is my problem: I have a motherboard foxconn rc 4107ma s2 with an ati radeon xpress 200. Last week i installed a nvidia 7300 graphic card, and it was very difficult for me to clean former drivers before installing nvidia's. during exactly a week, the computer was working correctly, but yesterday it crashed. when i started the computer, it sounded a "beep" repetidly and didnt get silence. so i opened the computer, and modified the jumpers of the motherboard (those in which we can read, clean-CMOS and wp-en-476 or something like this). Then I restarted the computer and i could read at first of all the brand, model and memory of my new nvidia card, and after this appeared a screen with foxconn logo in which it give it to me two options. "press tab to show post screen or del to enter setup" unfortunatly i cant press any key, because the keyboard doesnt work. so i need help to active in some way the keyboard or by conecting and disconecting some hardware in motherboard or whatever. thank you

Posted by on

  • antonio munoz mo Jan 15, 2007

    Hi, sandrew, thank you for answering so fast. My keyboard is not usb, and it doesnt work. another solution?

  • antonio munoz mo Jan 18, 2007

    hello sandrew. i've followed the steps you told me in your answer, but the keyboard is still out. i've even checked it with another keyboard, but this appears not to be the problem. so, i'd very grateful with you if you could give me another alternative solution. thank you, pal.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Plug those hardware one by one until you get the answer. by thus, my dell inspiron 6000 laptop works now

Posted on Oct 20, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

The keyboard should work, unless it is a usb keyboard, the drivers have not had chance to load because you are still in basic dos. Try a PS2 keyboard if this is the case.

Posted on Jan 15, 2007

  • andrew pester
    andrew pester Jan 16, 2007

    If you can't use the keyboard, then you will not be able to try a solution, unfortunately.

    If you have another keyboard try it so as to elliminate hardware failure, if another wont work, try re-setting the bios again at the 'JBAT1' terminal from pins 1-2 to 2-3 for a few seconds then then back to 1-2.

    Only other thing is just check you haven't got the keyboard and mouse in wrong connectors (Sorry!) or the motherboard PS2 connection is faulty.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nvidia geforce g210


1.5.1 Graphics Subsystem
The board contains two separate, mutually exclusive graphics options. Either the integrated
graphics processor (contained within the ATI Radeon Xpress 200 Northbridge) is used, or a PCI
Express x16 add-in card can be used. When a PCI Express x16 add-in card is installed, the ATI
Radeon Xpress 200 Northbridge graphics controller is disabled.


http://downloadmirror.intel.com/15113/eng/D101GGC_TechProdSpec.pdf

Mar 06, 2014 | Intel Computers & Internet

1 Answer

Sm bus controller, nothing works have tried all ideas i have found. once i do get it to install, i get error i dont meet system requirements? which i dont get cause this all came as one package? T5048...


This is what you need,

http://www.intel.com/support/chipsets/sb/cs-013541.htm


Not an ATI Radeon XPress 200 motherboard chipset?
I say thee nay to the forums,

1) The eMachines T5048 Desktop PC uses an Intel D102GGC2 motherboard.

Intel Support > D102GGC2 motherboard > Product Documentation and Manuals,


http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=15112&lang=eng&wapkw=%28D102GGC2%29

To the right of the first file -
File name: D102GGC2_ProductGuide_English.pdf
,left-click on Download.

On the next page left-click in the circle to the left of, I accept, etc.

[ The above is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files. {Do suggest upgrading to Adobe Reader X, (10), though, if you do not currently have it}

After you click on Download it may take up to 30 seconds before the first page comes up.
It may also take additional time for the file to fully download ]


2) The motherboard chipset is an ATI Radeon XPress 200.
Uses an ATI Radeon XPress 200 Northbridge chip, and an ATI IXP 450 Southbridge chip.

Information on the Northbridge chip,

http://en.wikipedia.org/wiki/Comparison_of_ATI_chipsets#Comparison_of_Northbridges_2

Look under the Model heading;

ATI Radeon XPress 1150 (originally named ATI Radeon XPress for Intel)
Intel Essential Series
D101GCC/D102GCC

(Grand Country is the Code Name for the motherboard)

Now look under the Codename heading; {code name for the chipset}
RS400, RS415, RC400, RC410


Information on the Southbridge chip is in the table that is next.
(Comparison of Southbridges)


Primer;

The motherboard chipset is the Northbridge chip, and Southbridge chip.

(Does not apply to motherboards that support the Intel Core i3, Core i5, Core i7, or Core i9)

Chip and Chipset are slang terms for I.C.
Integrated Circuit,

http://en.wikipedia.org/wiki/Integrated_circuit

The Northbridge and Southbridge chips have their directional names, from the way they are placed on the motherboard, for one.

If the motherboard is placed so that the Processor at the Top, and the Ram Memory is to the right, the Processor is due North.

The Northbridge chip is placed close to the Processor.
The Southbridge chip is closer to the Bottom of the motherboard, or South.
(Closer to the expansion slots)

The Northbridge chip handles the faster capabilities of a computer.

Processor, Ram Memory, and High-speed graphics.

AGP and PCI-Express are High-speed graphics.
A graphics card inserted into a PCI expansion slot, or using Integrated Graphics, is Not high-speed graphics.
Anything associated with the PCI bus is handled by the Southbridge chip.

The Southbridge chip handles the slower capabilities of a computer.

Anything connected to,
1) IDE
2) SATA
3) USB
4) Ethernet
5) Audio (Codec)

Motherboard diagram,

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg


In the motherboard manual, (Product Guide), go to Page 11.
The motherboard is shown rotated to the right, in comparison to how it sits in a computer.

The Processor socket is indicated by the letter H.
To the Left is a square sitting diagonally. This is the Northbridge chip.

The Northbridge chip has an aluminum finned Heatsink sitting on top of it,

http://www.ascendtech.us/itemdesc.asp?ic=MB4INTD102GGC2&eq=&Tp=

Click on the small photo of the motherboard to enlarge.
Processor socket in the foreground, Northbridge chip with aluminum finned Heatsink, sitting on top of it.

[ The Southbridge chip also has a Heatsink sitting on top of it. It's to the top left corner of the Northbridge heatsink, in the photo ]

Notice the wording for the motherboards brief specifications in it's heading.
The last specifications stated; ATI RC410 Chipset MBoard.

ATI RC410 MotherBoard Chipset.

In otherwords ATI Radeon XPress 200.

For additional questions please post in a Comment.

Regards,
joecoolvette

Sep 20, 2011 | E-Machines T5048 (7136) PC Desktop

2 Answers

I can not disable the integrated graphics card ATI RADEON XPRESS 200


if you don;t want ati, you need uninstall it from control panel \ add and remove programs.

Jun 04, 2011 | Foxconn 6627MA-RS2H Motherboard

1 Answer

I have intel D102GGC2 motherboard with ati radeon xpress 200.can i play movie smoothly in windos 7 32 bit? i have p4 processor.


Hi there,
ATI Radeon xpress 200 driver is installed automatically in windows 7, however if you face problem with the drivers you can download the latest drivers from the links below
Download ATI Radeon Xpress 200 WDM Integrated Driver v.10.2
Download ATI Radeon Xpress 200 Catalyst Software Suite v.10.2
if you require more assistance regarding this feel free to reply to this post
Regards-BA


Jan 13, 2011 | Intel D102GGC2 Motherboard

1 Answer

ATI Radeon Express 200 series comapred to ATI Radeon 8500


Hi. The ATI Radeon Xpress 200 is better than the Radeon 8500.

Aug 19, 2009 | ATI Mobility RADEON Graphic Card

1 Answer

Will intel D101GGC support ATI Radeon 8500?


yes, before you buy video card

verify first the interface slot available on *********** board (AGP,PCI or PCI Express)

then select the video card with the same interface in *********** board

verify the video cards driver if compatible to your operating system

before installing the video card update your BIOS to latest version

Mar 20, 2009 | ATI RADEON 8500 Graphic Card

1 Answer

With ASUS M2N-MX mainboard, ATI Radeon 7000 Series problem.


Your Motherboard has an onboard video chipset made by Nvidia. Nvidia and ATI have a history of not playing nice with each other.

I have 2 possible solutions for you.

1.) Remove the Radeon card and use the Nvidia onboard card (Essentially a Geforce 6100)

2.) Enter the bios (Usually done by hitting <Delete> or <F12> while the computer is booting up) Your Motherboards manual can tell you for certain. Then find the options for onboard video and disable it.

Then boot up the PC, When it say starting Windows press <F8> to bring up the windows boot menu. Select "Start in Safe mode" Once this loads up open the device manager, look under "Display adapters" find the entry for the Nvidia adapter, right click on it and select either "Uninstall" or "Disable this device"

Which you choose depends on your personal preference Whether you like Nvidia or ATI boards better.

If it makes your decision easier a Geforce 6100 is roughly equivalent to a Radeon 8500 in performance.

I hope this helps
Dave

Nov 11, 2008 | ASUS M2N-MX Motherboard

Not finding what you are looking for?
Foxconn (755A01-6ELRS) (K8S755A6ELRS) Motherboard Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Rommel Balcita

Level 3 Expert

749 Answers

David
David

Level 3 Expert

781 Answers

Are you a Foxconn Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...