Question about Bosch Axxis WFL 2060 Front Load Washer

2 Answers

Bosch Maxx WFL 2061 motor starts running and then stops

Hi, I would really appreciate some assistance on this problem. The Maxx WFL 2061 motor accelarates (either for a wash cycle or spinning cycle) and then stops again. It continues to do this every 30 seconds or so.   I have tested with an empty drum to be sure it is not an "unbalanced load problem"
Thank you
Rodney

Posted by on

  • rodney512 Nov 29, 2008

    Thanks for responding Tresilla.
    What I mean is that the motor starts speeding up but before it gets to normal operating speed, it seems to loose power and slows down to a complete standstill. Every 30 seconds or so, it repeats this cycle.
    I removed the tacho cover and the magnet is firmly mounted on the end of the shaft.
    The pickup wires look ok.
    Thank you

    Rodney


  • lr99 Dec 01, 2008

    manual



×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi ! I have problem with my Bosch Washer wfl 2061 .. It was running till stoped to
realease drain water out... But no drain water come out.. I have checked drain water host... Nothing thaere.. Water was still in the drum Tank... Whoever knows this problem , please kindly suggest or help me to do something.. Thanks.. Peace pkurdnirund@hotmail.com , peacepattaya@gmail.com

Posted on Dec 31, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

I nassume you mean that motor accerates to an uncontrolled speed.
check the motor tacho - mounted at the opposite end to the pulley. tacho consists of a circular magnet surrounded by a pickup. magnet may have unscrewed itself from the motor shaft

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Axxis WFL 2060 Front Load Washer - DRUM DOESN'T CYCLE


This seems to be a fault with the program controller unit or the water level sensor. The program does not advance further after the inlet is filled but operates the drain to exit water. Now the water level sensor must be checked as if this is not working in the stipulated time it will drain out. Also unless the water level sensor contacts on reaching of set level the motor must start.http://www.espares.co.uk/advice/washing-machines/a/7/1401/how-to-replace-the-bearings-on-a-washing-mach.html

Mar 14, 2012 | Washing Machines

1 Answer

The drum stopped turnig and there seewms to be no life in the motor on our BOSCH Maxx WFL 2060 does any one have any idears. Thanks


you need to test the motor to see if voltage is getting to it.. if yes change brushes or motor complete...01179512835

Dec 30, 2009 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

My Bosch WFL 1220 MAXX F/L washing machine stops during a cycle


The diagnostics are finding a proble. Usually a time out on the fill or empty. Check water supply is clear and that the drain filter is clean

Dec 08, 2009 | Washing Machines

1 Answer

Bosch maxx wfl 1300 washing machine that wont start.


hello could be brushes on the motor. there are 2 black clips that sit on the motor after time these whare down just slide them out and slide new ones in good luck

shaun

Jul 21, 2009 | Bosch Washing Machines

1 Answer

Bosch Maxx 6 WFL 2061 Front Loader W/M


brushes usually available on ebay,

if the drum rotates but does not spin, this could likely be brushes or component problem (i.e triac or relay) on control PCB. - the latter was the problem i had and this was easily spotted as a blackened track on the Relay on the pcb.

Brushes should be ~£5. - check the existing brushes first before buying them.

fitting is easy, BUT a word of warning..which you probably know anyway..
before meddling though in the machine, locate the large capacitor and with electical screwdriver and discharge all the terminals to earth first! - YOU MUST DO THIS TO AVOID ELECTRIC SHOCK!! - even if the machine is unplugged.

remove motor & undo the back plate to release old brushes.
clean of motor of any excess carbon dust, - this can eventually cause arching if not cleaned away.

reassemble and fit all plugs back.
THEN TAKE 5 MINUTES TO CHECK WHAT YOU HAVE DONE BEFORE SWITCHING ON. -
Do not rush anything - take your time.

Mar 24, 2008 | Bosch Axxis WFL 2060 Front Load Washer

2 Answers

Bosch Maxx WFL 2260


My drum stop, then I put in new carbon brushes. It works very good in 2mouth, now it stop again. Wht can be problem?

Jan 17, 2008 | Washing Machines

Not finding what you are looking for?
Bosch Axxis WFL 2060 Front Load Washer Logo

968 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...