Paper jam - Panasonic Panafax UF-585 Plain Paper Laser Fax

how to video

Hi tkasirye,

Welcome to Fixya.

You may need to check again the error code. According to the manufacturer's checklist for error codes, only the following are documented;

1. Error Codes - Toshiba 2860
2. 
   

1. "E01" Paper jam inside machine. "E02" Paper jam near the fuser. "E03" Paper jammed inside machine when power supply is switched on. "E04" Front cover open while copying. "E05" Paper jam near the aligning roller "E08" Paper jam at stacking area in the ADU "E11" Paper feeding jam at the ADU "E12" Manual feeding jam "E13" Paper jam from cassette 1 "E14" Paper jam from cassette 2 "E15" Paper jam from cassette 3 "E16" Paper jam from cassette 4 "E17" Paper jam from cassette 5 "E19" Paper jam from the LCF "E21" Paper jam in transport route 1 (LCF) "E22" Paper jam in transport route 2 (COPIER) "E23" Paper jam in transport route 3 (ALIGNING) "E25" Paper jam in transport route 4 (PFP) "E71" Original feed jam in ADF "E72" Original transporting jam in ADF "E73" Original exiting jam in ADF "E75" 2nd original feeding jam "E81" Paper jam before sorter "E82" Paper jam in sorter "E83" Sorter early arrival jam "E84" Paper in sorter when power is turned on "E85" Joint open jam while copying "E88" Paper jam outside the sorter bin "C01" Abnormal operation of the copier main motor "C04" Abnormal operation of the PFP main motor "C05" Abnormal operation of the ADU main motor "C11" Abnormal operation of the ADU side motor "C12" Abnormal operation of the ADU end motor "C13" Abnormal operation of the upper cassette tray "C14" Abnormal operation of the lower cassette tray "C15" Abnormal operation of the PFP upper cassette tray "C16" Abnormal operation of the PFP middle cassette tray "C17" Abnormal operation of the PFP lower cassette tray "C18" Abnormal operation of the LCF tray "C21" Optics carriage initialize error "C22" Lens initialize error "C23" Mirror initialize error "C26" Faulty exposure lamp "C33" Easy set-up is failed "C35" Developer material exists at the transfer separation adjustment "C41" Faulty thermistor or heater "C43" Faulty thermistor "C44" Faulty heater "C45" Sub thermistor is open
   

Shoulg you not find any of these mentioned error codes, I suggest you contact the tech support especially if the machine is still under warranty.

Hope this helps.

Takasashi

E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.

Techbelkin

Before you can clear a "PAPER JAM" or "PRINTER JAM" error, you must locate where in the unit the paper is jammed.
First, unplug the machine for safety and disconnect the telephone line. Next, follow these instructions based on where the paper jam is located.


Paper is jammed inside the paper tray:

1. Pull the paper tray out of the machine.

1. Pull out the jammed paper to remove it.

1. Reload the paper in the paper tray.
   
   
2. Reinstall the paper tray.
   
   
   

Paper is jammed inside the machine:

1. Remove the jam clear cover on the back of the unit. Pull the jammed paper out of the machine.

1. Re-insert the jam clear cover.
   
   
2. If you can not pull out the jammed paper, lift the scanner cover from the right-hand side of the machine until it locks securely into the open position.
   
   
3. Remove the jammed paper.
   
   
   

   
   
   

4. Check the print head's position. In the example photo the print head is positioned at the left hand side of the platen area.
   
   

   
   
   
   

5. Gently move the print head to the center.
   
   
   

   
   
   Note Be careful to not force the print head to move.
   If the print head is positioned at the far right hand side, you cannot move it. Please contact Brother Customer Service from "Contact Us".
   
   
   
   

6. Examine under the print head. If anything is found, remove it.
   
   

   
   
   Note Use a flashlight if necessary to check thoroughly.
   
   
   
   
   
   

7. Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover.
   
   
   
   
   

   
   
   
   

8. Reconnect the power cord and telephone line.

Note To prevent paper jams, do not put multiple kinds of paper in the paper tray at the same time.

If the message continues to appear on the LCD, the machine will require repair. Please contact Brother Customer Service from "Contact Us".



Thanks for using fixya......

If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

1. Gently pull any jammed paper out of the output tray or sheet feeder.
   
   
2. If the paper is stuck inside, turn off the Epson Stylus CX.
   
   
3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.
   
   Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.

If paper jams inside the Automatic Document Feeder, clear the jam as follows:

1. Open the Automatic Document Feeder cover and remove any jammed paper.
   
   
   
   
2. If necessary, lift the document cover and remove any paper that has jammed inside.
   
   
   
   
3. Press OK to clear any messages on the display screen.

If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

1. Gently pull any jammed paper out of the output tray or sheet feeder.
   
   
2. If the paper is stuck inside, turn off the Epson Stylus CX.
   
   
3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.
   
   Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.

If paper jams inside the Automatic Document Feeder, clear the jam as follows:

1. Open the Automatic Document Feeder cover and remove any jammed paper.
   
   
   
   
2. If necessary, lift the document cover and remove any paper that has jammed inside.
   
   
   
   
3. Press OK to clear any messages on the display screen.

There are pieces of paper stock on the sensor, when the paper jam happened then you pull out the paper did you get the whole page of the paper or have missing pieces? open the paper guide, turn off and on the printer and observe the unusual objects in the roller, this error is caused by objects in the sensor.

my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 80gm2

please help me. i have canon print mx308. the have paper jams. paper has the full out from print. how i can finish the problems?

Good day, Check the table below about the problem of paper jams.

Display and Meaning

[Paper Jam 0] - Paper has Jammed in the feeding area of the paper input tray.
[Paper Jam 1] - Paper has jammed in the fuser area or in the manual feeder.
[Paper Jam 2] - Paper has jammed in the paper exit area.

hope it will help you.