Question about Medion MD-1704 PC Desktop

1 Answer

Medion MD-1704 - Firewire Issues - HELP! (ieee94)

Hello am having a problem with my medion md-1704. i recently purchased a dv cam-corder and was excited to be able to rip these files directly into my computer - so i bought the wire that would allow me to do so, and connected.. .. but nothing. and really, since i haven't had any need for my fireiwre up until this day, i guess i never knew that it didn't work. So i just finished formatting - hoping that the plug and play would locate these drivers, and i just can't seem to make this work. I've checked with Medion's home site, as well microsoft's download center for anything i could get me hands on, but still nothing. i've downloaded driver packs from various sites on the web, searched through endless pages of troubleshooting help and tried "installing new hardware" with numerous amounts of failed attempts. Does anybody happen to have any suggestions - possibly a link to download drivers? Anything?? Thanks for your time. Am looking forward to hearing back from somebody.

Posted by on

  • 1 more comment 
  • j.v. creativity Jan 16, 2007

    THANK YOU SO MUCH FOR answering my post..

    .. however

    there was never an installation cd - i was figuring that windows would just plug and play it ..

    and secondly, no - it's not in my device manager.
    I've tried installing new hardware - picking the firewire from from the list, but have no other information about it (no drivers or manufacturer to) and medion no longer lists the specs for this computer so i can't even really find out.

    I'm actually having a really hard time with this - and i'm actually very computer savvy.

    Any other ideas?

    Please advise ..

    and really - thanks again for replying.

    -john

  • j.v. creativity Jan 17, 2007

    hello again and thanks for following up on me.

    i just recently purchased a jvc dv-camcorder (model no. GR-D30U) and no, it never came with an installation disc.
    I checked jvc's web site for anything close to a helpful download, and they don't even offer support for this.

    i opened up the computer and checked the board - it's a Winbond 83697HF

    i went to Winbond's home site and was able to dig up a tutorial on this particular board. Now, if i'm reading correctly, and once i get into the motherboard i begin to lose my savvy, but is it possible that this board ONLY supports IEEE1284 - and not the required IEEE1394?
    As i said earlier, i begin to lose understanding once we get this deep, so please forgive the ignorance if any.

    .. i've also serched Medion's site (the original compuetr manufacturer) for drivers and am unable to find exactly what i need.

    It's not listed in my device manager anywhere.
    I will go to "Add Hardware" .. once it searches for any new hardware it asks me to pick from a list - which i search through, and find no available heading for my firewire or 1394... so i have to "Add a New Hardware Device"
    After searching through my system one more time, i am finally able to see "IEEE1394 Bus Host Controllers"... which i select.

    the next screen is supposed to show a list of manufacturers pertaining to this item, but none are present, so i choose "I have a disc" and begin searching through every piece of possible software support thati may have, which is every installation disc from the original purchase, plus numerous amounts of others.

    .. and as you could well imagine, still no firewire.

    What am i supposed to do?
    This is begining to drive me crazy.

    Do you have any other other suggestions?

    ..and thanks again for the reply - you're actually my only hope right now (obi-wan!)

    -j

  • j.v. creativity Jan 17, 2007

    * * * CORRECTION * *

    i'm sorry .. that JVC MODEL NO. WAS: GR-D35OU

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

Fistly you may if you have'nt already have to load programme that you got with the camera it will have the camera firewire driver with it. Secondly, look in My computer>hardware>device manager and look down the list for your firewire ports(IE1394) and ensure it is enabled and has'nt got a '!' next to it.

Posted on Jan 15, 2007

  • andrew pester
    andrew pester Jan 16, 2007

    You are looking in the wrong direction.
    You need to install the firewire driver for the motherboard, so get the part no. or serial no. of your board and download from manufacturers site.

    Next you need the camera driver to enable your camera to connect to your pc as it will not connect otherwise, so go to the camera manufacturer site and download drivers.

  • andrew pester
    andrew pester Jan 17, 2007

    Ok start from the begining, you are plugging camera in to what port?, as your mobo does not have a firewire port, or have you fitted a firewire pci card?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Medion MD-1704 Desktop does not recognize my Hard Disk Drive nor my CD Drive, why?


it could be loose, unplug your box and disconnect the devices and reconnect them again.

Aug 26, 2014 | Medion MD-1704 PC Desktop

3 Answers

Medion PC


unplug the pc, wait a minute, plug it back in, what happens do you get any beeps? and this is a medion md-1704 correct?

Jun 08, 2008 | Medion MD-1704 PC Desktop

1 Answer

Front bezel exploded view medion md 1777


Hi Robert, please don't multipost. Someone will answer your question when they have the information.

Mar 31, 2014 | Medion MD-1704 PC Desktop

1 Answer

Have a medion md1704 needs sound drivers for it can you please help me thanks brian


Hi,

Click on the link below and download the driver utility program which will help you install the audio drivers

Driver utility program


* Please rate this solution with Thumbs up and Testimony to help us improve providing support

Feb 01, 2011 | Medion MD-1704 PC Desktop

1 Answer

Will Medion MD-1704 support 1 x 1gb memory module or must it be 2 x 512mb


Yes you can use 1 x 1GB and all the specs I see on your system show that you can actually upgrade to 2GB of RAM 2 x 1GB PC 2700.

Just make sure that you don't get an off-brand that will not be compatible with your motherboard.

Here is a site that I use to check on some of my clients pc's to see what is compatible or not

Dec 13, 2009 | Medion MD-1704 PC Desktop

1 Answer

I have a Medion MD8825 power button blinks


Very possible a power supply. You are giving time for the power supply to cool off. So I would guess you are right about the power supply. They are not too expensive so you might want to replace it..Darren

Oct 11, 2009 | Medion MD-1704 PC Desktop

1 Answer

I can't find drivers for my medion md-1704 computer


hi there, to help you, you will more than likely need to contact the company to get the drivers for your computer, the disk the company sends you will have the configuration for all components and hardware that comes with it, ususally, the cost is like 20...for the recovery disk and or restore disks.......this would be alot safer since you don't know from whom the drivers will be downloaded, or if it will be for others to control your computer without your ok, .....good luck....shia

May 21, 2009 | Medion MD-1704 PC Desktop

1 Answer

I need some drivers.


http://www.medionusa.com/

Nov 21, 2008 | Medion MD-1704 PC Desktop

2 Answers

Code for remote control Medion MD 4689


The manual of the Medion MD 4689 remote I own states the following codes for Grundig TVs:
008 017 043 091 101 117 135 136 114.

Best wishes from Spain!

Javier

Nov 07, 2008 | Televison & Video

2 Answers

Medion PC model MD 1777 wabout 4 yrs old will not start/boot up. Blue light just flickers continusly and makes a tapping sound.


Remove any disk inserted n your computer (floppy or cd) and try again.
Check the cables connection and monitor connection.
If no boot, try boot your PC using the CD restore provided with your machine

Oct 12, 2008 | Medion MD-1704 PC Desktop

Not finding what you are looking for?
Medion MD-1704 PC Desktop Logo

Related Topics:

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medion Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Larry Chandler

Level 3 Expert

1149 Answers

Are you a Medion Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...