Question about HP Photosmart M22 Digital Camera

1 Answer

Error 000000c8-8be7-586-053 camera has experienced and error please caonsult your user's manual

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 395 Answers

Please, perform a camera hard reset. To do so, follow the steps below:

  1. Turn off the camera.
  2. Remove any memory card installed.
  3. Remove all power sources (batteries and AC power) from the camera for at least 5 seconds.
  4. Reinsert the batteries and close the Battery/Memory card door and/or reconnect the HP AC power adapter to the camera.
  5. Verify if the camera works without an optional memory card.
NOTE: Resetting the camera returns all settings to the factory defaults. Any images stored in memory will be retained. If the error message still appears after performing the camera hard reset, please click contact hp on this page for more support. CAUSE: The issue is caused by the Focus Home Sensor falling out of its position.

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Usermanual for samsung rv510


I'm sorry for the difficulties you're experiencing in getting the User Manual for the Samsung Notebook. Please click hear to view the available downloadable documents which includes a manual of the RV510.

Thanks for using FixYa. Please let me know if you any additional help.

Aug 27, 2011 | Digital Cameras

2 Answers

I have purchased a junior micam camera model POCP101. Im having problems trying to download my pictures on the computer. Ive restarted my computer and ive installed and uninstalled it so many times and...


I have helped some users with the same problem.
I have uploaded the contents of the installation CD for users to download, since there is no website to do so.
Uninstall the previous installation, and ensure the camera is NOT connected to the computer while installing the software.
Use the application (photo impression included in the install CD) to pull the photos from the camera.
You can download the install CD here (188.81Mb): http://depositfiles.com/files/qmc5ykx6p
If you just after the user manual, I have uploaded that here (2.6Mb): http://www.filejumbo.com/Download/26D632AAF285B1D0
Hope this helps!

Dec 25, 2010 | Digital Cameras

1 Answer

I am not experienced in using any knew gadgets the last camera i used was a disposable one. I have had this camera for quite some time and I don't know how to use it. I am trying to find the user manual....


You can download the manual and more from
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a310#BrochuresAndManuals

Dec 05, 2010 | Canon PowerShot A310 Digital Camera

1 Answer

How can I restore my camera's original settings? I've misplaced the manual & 7 yr. old played with settings.


Holding down the menu button for 5 to 10 seconds usually brings up the reset menu. But if that doesn't help, here's your user manual direct and free from Canon. By the way, just out of curiosity what symptoms is your camera experiencing?

Jul 10, 2010 | Canon PowerShot A95 Digital Camera

1 Answer

Lens problems 114.100.Camera will not charge up


Are you experiencing an error fault message or No power fault. If you are experiencing an error fault message. Unfortunately there is no firmware upgrade available online therefor a repair is needed. If you are experiencing a no power issue, try these steps: 1. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Turn the camera on. 2. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a no power repair with KODAK or a new cable.

Jan 19, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Camera has experienced an error


You don't have to. Just gently smack it a couple of times. I swear, it soounds strange but it works!!

May 05, 2008 | HP Photosmart R725 Digital Camera

1 Answer

Digital camera photosmart r725


it wont open when power is turn on,i keep getting ,(camera has experienced an error)(please reset your camera)this number accompanies the message-00000018-4489-957-000,ive read the manuel nowhere does it say how to reset, help ?

Dec 13, 2007 | HP Photosmart R727 Digital Camera

1 Answer

System error (0e01)


According to the user manual your camera is corrupted and needs to be taken to a Casio service center. I looked on a photography forum and there were alot of people with this camera that had the same error message. Sorry for the bad news!

Aug 23, 2007 | Casio QV-R40 Digital Camera

Not finding what you are looking for?
HP Photosmart M22 Digital Camera Logo

Related Topics:

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Digital Cameras Experts

Fred Sops

Level 2 Expert

271 Answers

teddyboy

Level 2 Expert

413 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a HP Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...