Question about Digital Products International Clok Smooth iPod Docking Clock Radio TCR368

1 Answer

Alarm clock and time w/ clok smooth ipod system

I can not figure out how to set the time and alarm for my new Clok Smooth iPod Docking Clock Radio - TCR368. it did not come with a manual or any instructions.

Posted by on

  • 1 more comment 
  • carzi2 Dec 25, 2008

    I also never got instructions with product... I need help to start using iPod music on the dock. No way to switch from FM to iPod. Thanks to previous listing, was able to set clock.

  • Starksjo Jan 12, 2009

    Thanks to the post below I was able to set the clock. I was however unable to set AM and PM. Anyone know how to set it

  • sshipliz Jan 13, 2009

    I am also having problems setting the clock. I hold the clock/display button in and push the hour or minute button but nothing happens. I actually thought it was working once but I noticed that it became 12:01 because an entire minute of me pushing the buttons to set it had passed. 

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 1 Answer

Hi,

According to the instructions that we received with our clock. You should be able to get the Instruction manual from prodinfo@gpx.com. It is also supposed to be under the support section of the website www.dpi-global.com but I couldn't find such a link.

However the "Operational Support" insert has the following:

Setting the clock
1. With the unit powered off, press and hold the "Clock/Display/Play/Pause Button" for at least 4 seconds.
2. While holding the "Clock/Display/Play/Pause Button", press the "Hour" and "Minute Buttons" to adjust the hour and minute on the time.
3. When the correct time is selected, release the "Clock/Display/Play/Pause Button" to set the clock

Setting the Alarms
1. With the unit powered off, press and hold the "AL1" or "AL2" Button for at least 4 seconds.
NOTE: An alarm icon will begin to flash on the LCD display.

2. While holding the "AL1" or "AL2" Button, press the "Hour" and "Minute Buttons" to adjust the hour and minute on the alarm time.

3. When the correct time is selected, release the "AL1" or "AL2" Button to set the clock.

4. Press the "AL1" or "AL2" Button consecutively to switch alarm one and alarm two between sounding to a buzzer, the currently set radio station, or a docked iPod.

Posted on Nov 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you set a rating alarm clock radio


If you do not have a photo of the pet but you know what kind of breed the pet was, you can include a figurine of that breed in the gift basket. Your Fun Quirky Telephone AmanStino

Jan 09, 2017 | Audio Players & Recorders

1 Answer

How do I get a copy of the manual for tretech clock radio TCR4964


Try Googling (TruTech)(TCR4964)(manual) without parentheses.

Jan 08, 2017 | TruTech TCR4964 Clock Radio

1 Answer

I need a new Sensor for SPC373 where can I get one?


We have them
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

May 12, 2016 | Dual Sharp Atomic Alarm Clock Thermometer...

1 Answer

How do I disable the alarm on this radio


What is the make and model?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Mar 04, 2016 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

2 Answers

Iwave pod bluetooth speaker


Unless your PC is Bluetooth capable, you'll need to get a Bluetooth device to make it so. This is just one of many such devices to select from. Amazon com Roker Ultra Mini CSR Bluetooth 4 0 Usb Adator for PC and... They vary in size and price. Shop around to find one that best suits your budget. But you want an adaptor/receiver specifically for Bluetooth. (you will need an empty USB port for the adaptor)

Hope this information helps, best of luck!

Feb 06, 2014 | Audio Players & Recorders

1 Answer

How to reset my combination lock number on ipod A1236


Hi William
If you have forgotten the code or put the wrong code in your ipod, you can unlock the Ipod by doing the following:
Connect your IPod to the primary computer you use it with (the first one Ipod synced with), and open iTunes.
When you disconnect iPod from the computer, it will no longer be locked.
If you can't unlock Ipod using either (the code or connecting it to the computer you use to manage its songs). . . you can restore your ipod to factory settings using ipod Updater.
Please note that this will erase all data on your ipod.
Afterwards, you can add your music and data back to your ipod.
If you want to change the primary computer that your Ipod is associated with, do this:
1. Restore your iPod. WARNING: The restore process cannot be undone.
All of your songs and files will be deleted.
Always make a backup of your important data.
2. Connect your ipod to the computer that you want to be the primary computer.
3. Open iTunes and synchronize.
If you can't unlock your ipod and you don't have access to the primary computer, your only option is to restore the Ipod, which will erase all music and data.
Please take time to rate me
Bud

Apr 03, 2013 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

1 Answer

I have a 1970's Panasonic Flip Clock Radio. (Model RC6530) The radio works just fine, but the flp clock stopped flipping. There is power going to the unit. I can also hear a low hum from the flip...


It looks like your problem might be an easy fix, at least. If the gear train between the motor and clock got stripped, you'd be in a bit more trouble. If the motor just isn't spinning, remove it from the side of the clock housing. There are 2 screws (or nuts) holding it in place. When you get it off, the cover for the motor will also be off. Apply some 3 in 1 oil, or perhaps just a tiny bit of penetrating oil, and give it a spin. From what I've read, it should do just fine. A lot of people use wd40, but I understand that can gum up over time.

This is a "at your own risk" type of repair, but as long as you unplug it before dismantling the radio, I think you'll be fine.

Feb 10, 2012 | Audio Players & Recorders

1 Answer

I have a Shontek radio controlled clock. It ran fine for a couple of years, then the battery died. I install a new "Durcell" battery and it went through the motions of setting itself but was a...


Your radio should have come with a receiver of some sort for the radio signals to set itself. I had this same issue with my clock when the battery in the receiver died ... try replacing this too. It took me forever to figure out what it was because I had forgotten that it had its own radio receiver ... then once I remembered it existed, I had to find it, but replacing the battery fixed the problem. Hope that helps :-)

May 26, 2011 | Audio Players & Recorders

Not finding what you are looking for?
Digital Products International Clok Smooth iPod Docking Clock Radio TCR368  Logo

4,849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Products Audio Players & Recorders Experts

kakima

Level 3 Expert

98796 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69767 Answers

Are you a Digital Products Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...