Parts inside your printer are at the end of their service life. Contact your dealer for replacement.

A Service Error where you get a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is:

1. Replace the Waste Ink Pad/Pads with a new one/ones (many people ignore this one, and they just follow #2)
2) Reset the Internal Waste Ink Pad Counter by using SSC Utility

Download from this site http://www.ssclg.com/epsone.shtml and follow instructions.

I hope this information will be helpful. Thank you for using FixYa!

probably refers to empty cartridges
everything has a service life and it could be a possible part that is wearing out and needs replacing

you have 2 options --ignore it untl it stops performing
or get in a service technician

Use this link, covers what software and tricks

http://tricks-collections.com/reset-epson-stylus-color-printers/

goodluck

parts inside your printer are near the end of their service life. This is message is coming, how can i do this problem, please tell me

This message refers to the waste ink pad in the printer, when this is 'full' this message appears, You can reset this yourself by downloading the right software which you can download from here:
http://www.ssclg.com/epsone.shtml
I have also checked the C46 is supported

A Service Error where you get a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer.Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that Waste Ink Counter reset procedure and performing it first, to make sure your printer will then work.

Try this reset app

http://inkjetprinterhelp.us/sscserve.exe

This usually happens when the waste pads become full and need to be replaced.
You can try to do it yourself like this guy did on his printer:
http://www.hm2k.com/posts/parts-inside-your-printer-are-at-the-end-of-their-service-life

you can actually just use the software to reset the printer but eventually the pads will overflow and start to leak.

The last option is too take it to Epson and ask for a quote.

Epson Stylus Photo R300 InkJet Printer

when i swich on my Printer C43, both the indicator lamp is blinking, and tehn appear the message:
"Parts inside your printer are at the end of their service life"

The link Eagle tech has posted is no use to a CX3200 owner. The error is an ink overflow protection error and is fairly easy to rectify. You need to clean the waste ink pads in the bottom of the printer and then use some software to reset the internal counter. You can download all this stuff from the link below:

http://www.tradebit.com/filedetail.php/2725149-cx3200-rescue-kit-zip

A waste ink tank, does not stop the ink counter incrementing each time ink is used. The only money it will save you is from having to replace the ink pads - which you can wash out and reuse anyway.