Question about Necchi 3101 Mechanical Sewing Machine
There is a serger attachment available for that model. When you attach it to the machine you must start the fabric from the top of the foot. The foot won't cut the fabric if you feed it under the foot. You will want to use the Wide zigzag, overlock, or hemstitch stitches. Set stitch length knob on #4 for overlock stitch #1-0 for hemstitch or zigzag. Set the stitch width to the maximum. Make sure the hook arm is inserted over the needle screw so that when the needle goes us and down the attachment will work. Start on the edge of your fabric by making a small cut about 1-2 cm deep and about the same distance from the edge as the cutting blade. This will make it much easier to feed the fabric over and then under the foot. Remember to start the fabric on top of the foot and then feed it under the foot before it reaches where the needle would penetrate.
Posted on Dec 06, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 04, 2016 | Necchi Sewing Machines
Oct 10, 2015 | Necchi Sewing Machines
Sep 29, 2015 | Necchi Sewing Machines
Jan 08, 2013 | Sewing Machines
Sep 20, 2011 | Necchi 3101 Mechanical Sewing Machine
Aug 16, 2011 | Necchi 3102 Mechanical Sewing Machine
Jul 23, 2010 | Singer 7442 Mechanical Sewing Machine
Feb 26, 2010 | Sewing Machines
519 people viewed this question
Usually answered in minutes!