Question about RCA Universal Remote Control

6 Answers

How to reprogram code to RCA universal remote control

I have a JVC tv. I found many codes to try but I don't know the order to press buttons on the control to get the right program

Posted by on

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

Press and hold tv button (on the remote)
enter the code and release

the LED will flash 4 times if the code is wrong

Posted on Nov 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 470 Answers

Here's the step for solving it my dear

  1. Remove the battery cover on the back of the remote and look for the model number ("RCR6124609P" for instance)
  2. Consult list of TV codes for your model via: http://support.rcaaccessories.com/index.html (or search online)
  3. Press and hold the TV button on the remote. LED will stay "ON".
  4. Enter the code for your brand of TV into the remote while continuing to hold the TV button down. LED will go out during number entry and turn back on when the last digit is entered.
  5. Release the TV button. LED will flash and go out if number is entered successfully, or flash 4 times if it detects an error.
  6. Press Channel up or down to see if this has worked. ,,Get it????????? okay you must do it carefully and it will very helpful to it,,
hope it will help, regards JAN_yuanjia

Posted on Nov 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

Follow the following codes ---
012,024,036,037,040,048,051

Posted on Nov 28, 2008

  • futureloginn
    futureloginn Nov 28, 2008

    follow the link for more help--
    http://www.thompsontv.com/rcarc.html

  • futureloginn
    futureloginn Nov 28, 2008

    more for help---
    This is how you program the 241079 remote to operate your tv. 
    1. Turn on the TV 
    2. press and hold the TV button on the remote. 
    3. Using the number keys on the remote enter the four digit numbers (at the end of this reply). 
    4. Release the button and then press the on/off button. See if the tv responds to the remote control commands. If it doesn't try pressing the component button and the on/off again. 
    5. If you get no response then repeat these steps using the next code listed for your tv brand. 

    codes: 1012 1013 1054 1060 1065 1066 1067 1089 1157 1158 1159 1182

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 162 Answers

Press and hold the TV button on the remote, key in the code then release

Posted on Nov 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers
  • AbdulRahiman S Nov 28, 2008

    try tis>>
    1..Turn on the component you want to program.

    2..Press and release the component button on your remote that corresponds to the component you want the remote to operate (TV, VCR, etc.). The illuminated ON-OFF button will turn on and remain on.3..Press both the component and the ON-OFF buttons. The illuminated ON-OFF button will turn off, and then will come back on.4..Release both buttons after the ON-OFF button turns back on. The button should remain illuminated.5..Press and release the PLAY button. If the component does not respond after five seconds, continue to press the PLAY button every five seconds until the component turns off.6..Press and release the REVERSE button when the component turns off, then wait to see if the component turns on again.7..Press and release the STOP button to save the new code.
    else try tis.http://www.thompsontv.com/rcarc.htmlhttp...

    else 

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 19,396 Answers

See:

RCA Universal Remote Control-Programming Code

How to Program an RCA Universal Remote Without a "Code

If you need more specific info and the exact codes, tell ust the model of the TV and model of the universal remote.

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help me find the code to my RCA Universal remote for my Panasonic TV.


Anne try these codes if not use the links below.
3# codes 012, 013, 038, 086
4# codes 1003, 1054, 1055, 1062, 1109, 1130, 1170, 1246, 1253, 1275, 1277, 1286, 1289, 1350, 1389, 1392, 1406, 1418, 1419
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
RCA universal remote control codes for RCR450 RCR815 RCR412 and other...

RCA Remote Code Finder

RC Programming Your RCA Remote Control



How To Program an RCA Universal Remote Control

Apr 21, 2016 | RCA Universal Remote Control

3 Answers

I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html
RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Jan 23, 2016 | RCA Remote Controls

1 Answer

Reprogram rca systemlimk 3 for toshiba


Manually turn on the TV. Find the three-digit code for your TV.

Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

Press and release the TV button (The INDICATOR LIGHT will blink then remain lit).

Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off.

Aim the remote at your TV and press the ON•OFF button. Your TV should turn off.
These are the proceedings. If you want more details check this link.

Dec 24, 2012 | RCA Universal Remote Control

1 Answer

I have an RCA tv model # f27159wn, we had a universal remote to turn it on because the power button is missing. Our son lost the remote, when we found the remote it doesnt turn the tv on now. How do I...


RCA tv codes from the original RCA 3-in-1 universal remote.000,181,100,233,203,212,098,005,003 004,006.One of these codes program for the RCA universal remote will work.Sorry but to find the tv wright codes for the tv to work.The tv must be power on and working to find the tv wright codes to program in to turn the tv off to get the tv wright codes.Try website like Rmotes.com to buy the tv original remote,will not require tv on to used the tv original remote.

May 03, 2011 | RCA 4-in-1 Universal Remote Control

1 Answer

Hello I have a universal remote control for tv sanyo but I lossing de manual instruction and Iand ree program my tv. only I need how cam progarm my remote control pleaswed thanks.


Here is the steps on how you can reprogram your RCA tv remote control:


1. Turn the television on by pressing the "Power" or "On" button that is located on the set.
2. Press and hold down the "Code Search" button located on the RCA TV remote. 3. Press the "TV" button on the RCA TV remote. Once you press this button, you can release the "Code Search" button
4. Start pressing the "On/Off" or "Power" button that is located on the RCA TV remote. Keep pressing the button until the television shuts off. 5. Press "Enter" on the RCA TV remote to save the code on the remote. The remote will then control the television.

Apr 07, 2011 | RCA Universal Remote Control

3 Answers

Lost the manual for my rca universal remote


Try these codes for Quasar TVs:
1003, 1054, 1055, 1070, 1109, 1170

Codes can be found here.
http://remotefinder.rca.com/default.aspx?site=rca

The manual for the remote can be found here (as of 06/07/2009):
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other

Basically, try holding the TV button, the on/off button should light up. Then press the digits for the code one at a time. If the code is accepted, the on/off button should go off. Finally let go of the TV button. Now try operating your TV.

Apr 06, 2009 | RCA RCR311S Remote Control

1 Answer

Reprogram RCA Remote to Sony Television


1 Turn on the component you want to program.
2 Press and hold both the TV/DVD/ect button and the power button untill the light comes on and stays on
3 Press the play button every 5 seconds until the device turns off. A bank of ten codes is being sent each time.
4 Press the rewind/reverse button to see if it turns off/on again. Wait 2 seconds and press again until it turns back on.You may have to do this up to 10 times until it searches through the bank of ten codes sent.
5 Press and hold the stop button until the light goes off. This saves the code.

Nov 03, 2008 | RCA 3-Device Universal Remote with...

6 Answers

RadioShack Universal Remote (Cat. 15-2147) - to use with JVC TV


programming a device: make sure batteries are installed correctly. Turn device on(for ex., your TV). Press TV button next to Power button on your 15-2147...Press and hold the little P button until the red LED lite blinks twice...enter the first four-digit code for your device(in your case,JVC TV...first set of #s is '0463' ) note: the LED will blink once as each number is entered. If the number is correct the LED will blink 2x. Note if the LED doesn't blink twice after entering the 4 digit code, begin again with the next set of numbers. For JVC the codes are 0463 and 0053. Once your remote blinks twice after entering in your TV code, press the power button. This should turn off your TV. Just use like any other remote. Hope this helps you.

Oct 11, 2008 | Radio Shack (15-2147) Remote Control

2 Answers

RCA universal remote


Try it without a code. Turn your tv off. Press tv then press the on.off button and tv button at the same time. When it lights up, press play every five seconds until the tv powers off. Next press the reverse button every few seconds (sometimes takes a while), until it powers back on. When it powers back on hit the stop button to save the code.

Sep 08, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a RCA Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...