Question about Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

Watch 1 hour fast

Watch set to nyc, my add is North Carolina, I need help resetting please.

Posted by on

  • seemeride Nov 29, 2008

    press and hold button "a" use button "c" to scrool up or down with didgital time flashing use buttons "b" & "d",you must hold each button seprately for about 3 seconds. Using button "c" to scrool back and forth from minutes and then hours.

  • seemeride Nov 29, 2008

    This is exactly how I helpped myself...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Perserverence thank you very much.

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My watch is 3 hours and 5 minutes off its a shp8948


1. Since all of the settings seem to go through the start/stop button, hold it down for three seconds to put it in "set the watch mode" (when the seconds at the bottom start blinking).
2. Do a quick press of the start/stop button to move from seconds to minutes to hours to years to months to days. The mode button subtracts & the reset button adds.
3. Setting alarms & so on require putting it alarm mode via the mode button. Use the reset button to move to the selected alarm (1-5). 
4. Hold the start/stop button for three seconds to "set the alarm mode."
5. Quickly press the start/stop button to between things to set (kind of alarm, hours, minutes).
6. Again, the mode button subtracts & the reset button adds.
7. A three-second press of the start/stop button exits the setup mode.

Feb 27, 2015 | Watches

1 Answer

How do I use the buttons in this QHY watch?


Hopefully, this will help...

Lego Watches Manual Instruction:
There are 4 buttons on this lego watch case, Light button, Mode button, Stop button and Reset button, now I will show how to set the time easily!
1, Light Button: Press this button, the watch LCD light will display for 3-5 seconds;
2, How to use the stopwatches chronograph function?
Answer: When the lego watches in normal working condition, Press "Stop button" for 1 time, then the watch goes into the chronograph mode, then you can use "Stop button" and "Reset button" to operate this function.
3, How to set the alarm time?
Answer: When the lego watches in normal working condition, Press "Stop button" for 2 times, then the watch goes into the alarm mode, then you can use "Stop button" and "Reset button" to set the alarm time, also you can turn off or turn on the alarm function and chime on every hour function by the same operate.
4, How to set the right watch time, hour, minute, second, week, date, month, year?
Answer: When the lego watches in normal working condition, Press "Stop button" for 3 times, then the watch goes into the time setting mode, then you can use "Stop button" and "Reset button" to set the second, minute, hour, week, date, month and year.

This is all. So now please have a try to set your lego watches time!

Dec 06, 2014 | Watches

1 Answer

Waveceptor reset


I have a number of these Casio and Citizen watches. This watch does not use GPS for the time keeping. It uses a land based broadcast time signal. There is public information about where the signals come from for your area. The technical breakdown of the time code signal is public access information.

The instruction manual of the watch has the information about when your watch should automatically receive the time signal, and how to set up the watch. Many of the manuals also included a map showing the time signal coverage, and includes the time of day information to show when the signal is strongest.

Make sure the watch settings are for your time zone. This is important. If the main time zone is not for your area it will be trying to receive the signal at the wrong frequency at the wrong time of day. There are areas where the signal may not be able to be received. You can get the mapping for this from the service that the watch has been set to use.

In North America the auto time receive is supposed to take place between midnight 00:00 to 04:00. In the eastern part of North America the reception is poor compared to central and western part of North America. Check the instruction manual for your watch for details.

Below is the spec listing of your watch.

  • Atomic Timekeeping
    Receives time calibration radio signals which keep the displayed time accurate
    Auto receive function (3 times per day)
    Manual receive function
    Signal: WWVB, UK MSF Frequency: 60kHz
  • 50M Water Resistant
  • EL Backlight with Afterglow
  • World Time
    29 times zones (30 cities), city code display, daylight saving auto/on/off
  • Date Alert
    Display flashes when set date is reached
  • 4 Daily Alarms and 1 Snooze Alarm
  • 1/100 second digital stopwatch
    Measuring capacity: 99:59'59.99"
    Measuring modes: Elapsed time, lap time, split time, 1st-2nd place times
  • Hourly Time Signal
  • Auto Calendar (pre-programmed until the year 2039)
  • 12/24 Hour Formats
  • Accuracy: +/-20 seconds per month (with no signal calibration)
  • Battery CR1620
  • Approx. battery life: 2 years
  • Module 2556
Size of case / total weight
WV57 47.0 x 39.0 x 12.5mm / 44g
WV57HD 47.0 x 39.0 x 12.5mm / 89g


btnshopping.gif

Apr 29, 2014 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

My atomic watch wll not let me to select the proper city code (NYC) or make any other selection to reset the time. It was great for four months after Christmas (a gift) but the battery ran out in April. ...


My best advice to you is to contact Dakota or send to Dakota. It may not be what you want to hear, but its probably going to be your best interest to send back to them so they can properly care for your watch.

http://www.buydakotawatches.com/faq.aspx

Good luck.

Aug 12, 2010 | Dakota Watches

1 Answer

Athletic wrist watch stuck in 24 hour mode


Maddening, isn't it? Fortunately the solution is here:

http://www.ehow.com/how_5593310_set-athletic-works-watch.html

1 There should be four buttons: mode, reset, start and light. Find the mode button and press it three times until it is in the set time mode.

2 Find the reset button, which usually is located on the bottom right side of the watch face, and hold it until the time starts blinking.

3 Press the start button to change minutes.

4 Press the reset button again to switch to hours.You will know it worked when the hour starts blinking instead of the minutes.

5 Press the start button to change the hour. The watch can handle two modes: standard and military. As you press start, the hour will change from AM to PM, noted by an "A" or a "P" in the top right. When you get through 24 hours, the watch will change to military time and an "H" will be displayed instead of "A" or "P." Keep pressing start to go through another 24-hour cycle and it will revert back to standard time.

Apr 30, 2009 | Watches

1 Answer

Casio Wave Captor Watch wont set to correct time.


You need to manually adjust or set the hands to the home position as they are not where the watch thinks they should be. This can happen when you bring your watch close to a strong magnetic field. Look in the manual to do this. Afterwards your watch should set to the correct time.

Apr 21, 2009 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

How do I reset?


follow this link and download manual:

http://world.casio.com/wat/download/en/manual/

Rate me, please.

Mar 20, 2009 | Casio Watches

2 Answers

Aquatech watch


press mode button 3 times untill you get into the time set mode - press lap/reset twice until the hours start to blink.

press start/stop and cycle thru all the modes depending what time you want to set - it will go thru 1, 2, 3, etc thru 24 H then 1, 2, 3, etc thru 12 A then 1, 2, 3, etc thru 12 P - depending on thte time you want to set the A is for AM and the P is for PM

hope this helps

jeff

Jul 23, 2008 | Watches

Not finding what you are looking for?
Casio Wave Ceptor WV57HA-1AV Wrist Watch Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

k24674

Level 3 Expert

7987 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...