Question about PDAs

1 Answer

Need codes for a daewoo tv for my all in one remote controll

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

You did not say what make/model of "all in one remote control" that you have. That is going to be needed to solve your problem.

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need codes oneforall remote for toshiba tv


You can find the correct code for your remote at http://www.oneforall.com/us_US/support
Please rate this solution. Thanks.

Dec 09, 2009 | PDAs

2 Answers

Finding code for sharp tv for code entry-sharp unytron on a universal remote


HI,

Can you please give me the model no. of the universal remote.

May 27, 2008 | PDAs

1 Answer

Require code for daewoo tv remote control is 4 in 1 technika


daewoo tv uses one of the following codes .. (for late model remotes .. earlier remotes only have 3 digits)
1004, 1005, 1006, 1014, 1015, 1016, 1103, 1137, 1151, 1223, 1253

if you have an older remote that requires only 3 digits .. then we can try to find that for you as well but sometimes the codes are not in the older universal remotes ..

Oct 03, 2009 | LG KU990 Viewty

1 Answer

I need Codes For my Trisonic TS-RC4660 Remote Control . I need codes for a Sharp Tv ..Can you help me


the only place you can get codes for a remote to program it is either on the company website or on the paper that came with the remote

Jan 06, 2009 | PDAs

1 Answer

How do i program my urc-3220 universal remote


To search for a code for your TV:
On the remote control, press TV once.
Press and hold SET until the LED (red light) blinks twice,
then release SET.
Enter 1.The LED will blink twice.
Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits ,
CH+, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
To lock in the code, press and release SET.The LED will
blink twice.
To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
Hope this helps. :}

Aug 31, 2008 | PDAs

4 Answers

Need codes for Technika TT-707 4 In 1 Universal Remote Control to control a daewoo dvd player


I have searched for this information for over a year. This manufacturer does not gice a manual to it\'s products. It doesn\'t even have a website!
But today I\'ve found the manual so here it is for you to share.
Here is direct link.

I won\'t buy this **** no more.
I hope this helps.

Jun 28, 2008 | LG KU990 Viewty

1 Answer

Need digit set up code for hand held TV remote


I only need to find the model of TV and a code was already available, which I used, and now my remote works. No real parts were needed. thank you.

May 29, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Jumbo remote can you please send me the codes for the jumbo remote sn (807245000020) for the rca tv thanks for your help if you can


You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 24, 2008 | PDAs

Not finding what you are looking for?
PDAs Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...