Hi the you need to type in a new code press menu then using numbers on the remote type 1570 it will bring up hidden menu then go to the nav option it needs to be set for ntl 5401 then underneath you need to add the new key 00 = cd 11 58 05 ee 96 e7 f3
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Sarah, If you've locked your phone through entering an incorrect pin number 3 times then you need a Puk code, Ring your service provider and they will give you the FREE Puk code.....
If you lock your phone again some time in the future and you're still with the same service provider you can use that same Puk code.. BUT if you've forgotten your pattern code The link below is a youtube video of a guy shows 3 way but the 3rd way is a factory reset meaning you loose every thing in your phone
but the first two ways are worth watching. Also there's videos down the right side that may help..... I hope this helps...... CHEERS..
How to update your Zune player
If you haven't used your Zune player in a while, you might need to update it in order to get the latest features and improvements.
Steps to update
On your computer, start the Zune software.
Connect your Zune player to your computer by using the USB cable that was included with your player.
If a newer version of the Zune firmware is available, you'll see a notice to update your player.
You can also manually check for new player updates in the Zune software. Go to Settings (located at the top of the screen), Device (located in the upper-left corner), and then Update (located in the list at the left).
If you receive a notice to update your player, follow the on-screen instructions.
Important During the update process, don't disconnect your Zune player it until the update finishes. The update might take several minutes. During this time, your Zune player might restart several times.
If these were folded when in the box, then logically one would think they would be foldable headphones.You could try gently pulling one earpiece at a time downwards while holding the overhead piece firmly with your other hand.
Looking at the picture it appears that the four screws on each side arm are there to secure a square or rectangular plate inside. The plate is either fixed or it has slots which enable the earpieces to slide down and away from the overhead.
If you got them from an online store, unless they have since gone out of business, you should feel free to email them and get further advice if mine fails to solve your problem.
Go to the Task Scheduler and see if it is launching there. It could be scheduled to run at "log on of any user". To open the Scheduler, click Start and then left click on Control Panel in the right hand column. Click on System and Security at the top of the left hand column in the Control Panel window. Near the bottom of the System and Security window, look for Administrative Tools. Left click on the link for Schedule Tasks under the Administrative Tools heading. Expand the Task Schedule Library and check the various folders in this section for the Asus Update program. My computer has a few Asus tools in their own folder at the top of the list.
That should be where it is hiding but it could be in another folder in the Scheduler. Click on the item and then either right-click and select Disable or Delete (to permanently remove the Update program from the schedule). Alternatively, click on Action and then Disable or Delete. This is the second option after File.
You can try to re-solder it but make sure you use a heat-sink and flux. The problem with small earphones is that it's a wire within a wire - for visual purposes picture it like the coax cable that goes in the back of your TV. If the inner wire is missing you can't just strip the wire to get it out because you need to keep the two from touching. If you don't mind spending a small amount of money take it to your local electronics repair store and they'll reconnect it for a small fee.
it should be done automatically, but if you havnt had it done or you want it done NOW. then pull the power plug out of the sky box, then, while holding the backup button on the sky box, plug the power back in, wait 5 seconds or something, you should get an update screen, wait till that finishes, then wait another min and the box will turn on with new firmware. Hope this helps
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when: 1. the question is unclear, incomplete, or poorly worded... 2. the question is mis-categorized - so the correct experts aren't viewing it... 3. the question requires an answer for something that cannot be explained online adequately... 4. specific training, tools, or equipment are required to avoid injury or death... 5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason. Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are... $ 9.99 answer for one question. $12.99 Live Real-Time online chat or premium e-mail support. $29.99 Live Real Time phone support Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership. Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
the new key is cd 11 58 05 ee 96 e7 f3 you need to enter this code in the secret menu to access that press menu on the control then key in 1570 then go to nav option then your on the page it should have ntl 5401 then 00 underneath then you write it under that