Question about Samsung HLN567W 56" Rear Projection HDTV

1 Answer

Fuzzy connection on my samsung DLP HLN567W

One of the component connections which I use for my DVD player all of a sudden has a fuzzy picture, I went out and bought new component cables and still didn't work. Can you please give me some suggestions on how to troubleshoot this problem.

Thank You

Posted by on

  • nochancetowi Dec 01, 2008

    I tried changing DVD players and I have 3 component connections on my tv and the only one that does not say not supported mode when I hook up DVD player is the one I'm having a problem with. Could it be an internal problem with that specific component connection from my tv?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

Try the DVD player on another component connection on the TV. If the picture is still distorted try another DVD player or something with component output. If thre picture is normal with another input device then the issue is the DVD player,

Posted on Nov 30, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuzzy channels all of a sudden, cannot figure out how to get reception again?


Sounds like your cable has become disconnected at some point between the television and the outside connection. Start by unplugging the cable at the rear of the TV and then reconnect. Check the picture. If no success, then trace the wire back to the next connection point and disconnect and reconnect. Continue to trace your line until you get to the point where the outside cable connects to the house. If you do not get a clear picture, then you will need to purchase a new cable.

Jan 23, 2012 | Televison & Video

1 Answer

My vizio p4 edtv 46" made in 2003, went from working fine to a fuzzy blurry picture. You could change the channel and it would be fine for a second then back to fuzzy and blurry. I hooked my dvd player up...


This is not an easy fix. It's the main board (PCI) which is the board you plug your DVD player or cable line into. You could replace it yourself, but if your not a tech you might want to have a local repair shop do it. You could find the part online. This is an older TV so the part might cost you $300.

The part number should
M/B 4359401414

Jan 04, 2010 | Vizio P4 46 in. HD-Ready Plasma Television

1 Answer

Unplugged it, to plug in a game system, and when I plugged the Dvd player back in the picture is fuzzy and black and white. Audio is fine. I even tried to replace the component cable


the chroma circuit in the processor stopped working. see if under warr and get it fixed or buy a new player they are real cheap nowadays.

Nov 08, 2009 | Philips Magnavox DVD Player MWD200F

1 Answer

DVD not showing a clear picture


test test test 17:05
danke bitte
do not answer test test
sorry

Jul 04, 2009 | Televison & Video

1 Answer

No owners manual can't get new blue ray dvd player to work on tv


Here is the manual:
http://www.hdtvsolutions.com/pdf/JVG%20HD52G56G.pdf

When using the HDMI connections you may have to tell the DVD to output to that port.  Also you may have to connect additional sound cables from the DVD output to the TV.

Jun 02, 2009 | JVC HD-52G786 52" Rear Projection HDTV

1 Answer

Picture becomes fuzzy in different areas of the screen


sounds like a splitter problem try replacing splitters

Mar 24, 2009 | LG 50PX5D 50 in. Plasma HDTV

1 Answer

Panasonic Viera 37 inch Plasma won't read DVD player


does the cd/dvd player have component hookups or are you just using HDMI cable, lots of tv's are having trouble with the HDMI protocol, I only use component cabling, it has HD capability up to 1080i resolution

Mar 16, 2008 | Televison & Video

1 Answer

Philips 26


There is an input imbalance. Either try connecting your cables to different inputs on your TV, or try connecting to different outputs on your DVD player. (Only worry about the yellow video cable bit initially). Alternatively, try a different cable type; you'll have some ins and outs that don't use RCA connectors.

Mar 03, 2008 | Philips 26PF5521D 26 in. HD-Ready LCD...

1 Answer

Fuzzy Picture


Are you using the component (RGB) outputs, and a Sony TV? I believe that there is something in the output of at least some Panny DVD recorders (over the RGB component path), which Sony TVs don't process properly.

Aug 15, 2007 | Panasonic DMR-EZ17 DVD Recorder

1 Answer

No picture or sound


perhaps the xbox is causing the tvs to malfunction. i would get a new one. remember that xbox is giving everyone a 3 year extended warranty on the xbox 360

Jul 31, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Samsung HLN567W 56" Rear Projection HDTV Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...