Question about GE 900 MHz Phone

2 Answers

Handset No Link To Base error and no dial tone

Hi, I have a GE 26936GE1-C 32-channel 900mhz call waiting ID and speakerphone cordless telephone. When I press the ?talk? button on my handset, it beeps 4 times and the handset display says ?no link to base? and ?ready?. The speakerphone base does get a dial tone and I can dial out on it but I can?t get a dial tone on the cordless handset. I have tried a new battery and allowed it to charge for 2 days before re-testing. I have moved it around to different phone outlets with the same results. I have checked to make sure that the base and the handset are the same model number and they are. The ?page? beep function from the handset going to the base does work but when I try to ?page? from the base to the handset, the handset does not beep. The Charge/In Use red indicator light on the base stays red only when the handset is in the cradle. I have double checked to make sure the battery is installed properly. I have done everything listed in the user?s guide troubleshooting tips section for ?no dial tone? and ?unit beeps? to fix it. Hopefully someone can help me. Thanks in advance.

Posted by on

  • 4 more comments 
  • Anonymous Mar 02, 2008

    I have the same problem as Mmmmmm experienced. No dial tome from the handset and the message is "out of range" from the base even when the handset is just foot away from the base. The base speaker phone works fine. The battery is the right one and is fully charged. Please! Someone helps me!

  • Anonymous Jun 14, 2008

    Hello, I have a GE 900 mhz cordless phone with model no. 26936GE1-C. everytime I push the TALK button, the handset will beep 4 times and will display NO LINK TO BASE. I took the battery off the handset and put i back again hopefully to reset the unit. It didn't work. the base cradle unit is working okay as i can use it to call a number except for the handset. It seems the handset and the base unit are off its frequency. please help. thanks

  • Anonymous Jun 14, 2008

    I got the same problem with my GE 900 mhz cordless speakerphone( model no. 26936GE1-C), everytime i push the TALK button it beeps 4 times and the display will read NO LINK TO BASE. The base station is working okay except for the handset. Please help. thanks

  • Anonymous Mar 17, 2014

    a loud beep comes on only once in a while when i am on the phone this did not occur this time when the pone went compltely dead

  • Anonymous Mar 20, 2014

    whats wrong

  • Anonymous Mar 29, 2014

    I have Siemens Gigaset C 67H - it's cordless handset is asking for registration...if I press menu key it gives a message please confirm registration - then I get a message of - hold base page wait for beep - none of the other functions are working. can somebody help how to solve this.

×

Ad

2 Answers

My battery is a Ni-Cd. I bought it new on eBay (TL26554 battery number). I allowed the new battery to charge for a long time and then tried to see if it would work. But no go....the handset gave me the same error message. Good Luck to you too! Mmmmmm

Posted on Sep 18, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank wolfgang24@verizon.net

Posted on Sep 17, 2007

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: my ge phone 900MHZ, cordless

I need a replacement part for the phone model 26955 cordless handset and corded speaker phone. The part is called a handset hook that is used to hang this phone on the wall.. I would like to purchase this piece for the missing piece that did not come with my phone. Can you help me find this piece.

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my siemens landline phone?


well lightening does do bad things to telephones . that are always plugged in to electric and phone lines

Feb 25, 2015 | Siemens Gigaset A58H DECT 6.0 Digital...

1 Answer

Access speaker on phone


Press the SPEAKER button to switch to the speakerphone. Press TALK/CALL BACK to switch to the handset.

If you need a manual, you can download one at
http://www.home-electronics.net/ge/pc/IB/25932EE1_IB.pdf

Apr 06, 2011 | GE 25932 Cordless Phone

1 Answer

How do i put the ring tone back in the handset


    Does the Phone Power Up?
  1. When you pick up your GE cordless phone and press a button, the phone should beep as a confirmation that a button has been pressed. If the telephone handset does not beep, or if it does not respond to any buttons, the battery may be in need of a recharge. Verify that the cordless phone base unit is plugged in to an electrical source, then place the handset into the charging cradle. If no lights illuminate on the phone, or if charging fails to correct the issue, clean the metal charging contacts on the cordless handset and place the phone back on the charger. If it still fails to respond or to charge, the unit may need to be serviced or replaced.
  2. Does the Battery Hold a Charge?
  3. If the cordless phone charges up and appears to be ready for use but dies after only short periods of use, the internal rechargeable batteries may need to be replaced. Replacement batteries are widely available at electronics and discount retail stores. Note your phone's exact model number, as this number will be necessary when purchasing a replacement battery.
  4. Listen for a Dial Tone
  5. If the GE cordless phone powers on, and beeps when you press keys, but no dial tone is heard, one of three problems is the likely culprit. The phone's batteries may have an insufficient charge to fully power the phone, a condition that can be corrected by simply placing the phone back in the charger. If the batteries are charged, but no dial tone is heard, it is also possible that another telephone in your home or office is "off hook" or in use; verify that all telephones, fax machines and modems are securely on the hook. If there is still no dial tone, your telephone service may have been disconnected or require service by your local telephone company.
  6. Listen for Static
  7. On some GE cordless phone models, particularly older models, static may be heard if the radio signal between the handset and base unit experiences interference. Common sources of interference include unshielded electronics, appliances, and radio transmitters, as well as high-tension power lines. If your phone offers an option to change channels, try several different channels to see if the static is eliminated. If static continues to exist, or if static can be heard on wired phones sharing the same line, your telephone line may require service.
  8. Verify Your Handset is Registered
  9. Some models of GE cordless phones may display a message on the display screen that the handset needs to be registered. If this message appears, move the handset close to the base unit and press the "Prog/Mute" button near the bottom of the handset. Next, press the "Pager" button on the base unit (your handset may instruct you to perform this step). Finally, press the "Prog/Mute" button on the handset one more time to complete the registration process. Your GE cordless phone should now work correctly.The GE Cordless Phone brand is designed to deliver the conveniences of cordless home service with quality sound and features. There are many models of the GE Cordless Phone. The most current models, including the DECT 6.0, have standard features such as call waiting, caller ID, visual ring indicator, phone number memory and digital answering systems .
  10. Before you use your GE Cordless Phone, ensure that you have all the parts. Your cordless phone package should include the phone base, a handset battery pack, a battery compartment cover, the cordless handset, a wall mount bracket, and a telephone line cord and AC power adaptor. Once you have confirmed that you have all of your parts, insert the handset battery pack into the handset and replace the battery compartment cover. Insert your telephone line cord and the AC power adapter into the phone base. The phone base identifies the telephone line as TEL LINE and the adapter as AC. Plug the phone base into the electrical socket. Place the cordless handset into the base. Allow the phone to charge for at least 16 hours before its first use. Failure to fully charge the battery before its first use will result in poor battery performance.
  11. Once you have fully charged your phone, you can proceed with setting up your phone's features. If your cordless phone includes an answering system, complete this setup process first. Turn on the answering system by pressing the on/off button. The message indicator light will display. The cordless phones are defaulted to English as the selected language. To change your language preference, press the "Skip" button for two seconds. The language will change to Spanish. Next, you will set up your voice time and day stamp. While the answering system is on, press the "Answer" button on your handset for two seconds. The phone will enter the answerer mode. Press the "8" key. This will take you to the time/day setup menu. Use the number keys to set the hour and minutes. Use the volume up and down arrows to set the AM/PM. Press "#" to save. The cordless handset will also require that you give it a name. Press the "Mute" button for two seconds until the handset reads "ENTER NAME." Enter the name of the handset by using the touchtone keypad. Press the "Mute" button to save. Enter the default area code by pressing "Mute" until the phone displays "AREA CODE." Enter your three-digit area code and press the "Mute" button to save.
  12. GE Cordless Phones are designed to be simple and convenient to use. To place or answer a call, press the TALK button. You can pre-dial a number by dialing the number before pressing the TALK button. When you are ready to make the call, press TALK and the phone will dial automatically. To answer a call that is waiting on the other line, press the FLASH button. If you experience call interference or bad reception while on a call, press the CHANNEL button until your line clears

Nov 17, 2009 | Uniden Cordless Phone

1 Answer

NO CALLER ID 25881EE3-A


The GE Cordless Phonemag-glass_10x10.gif brand is designed to deliver the conveniences of cordless home service with quality sound and features. There are many models of the GE Cordless Phone. The most current models, including the DECT 6.0, have standard features such as call waiting, caller ID, visual ring indicator, phone number memory and digital answering systems.
    Before You Start
  1. Before you use your GE Cordless Phone, ensure that you have all the parts. Your cordless phone package should include the phone base, a handset battery pack, a battery compartment cover, the cordless handset, a wall mount bracket, and a telephone line cord and AC power adaptor. Once you have confirmed that you have all of your parts, insert the handset battery pack into the handset and replace the battery compartment cover. Insert your telephone line cord and the AC power adapter into the phone base. The phone base identifies the telephone line as TEL LINE and the adapter as AC. Plug the phone base into the electrical socket. Place the cordless handset into the base. Allow the phone to charge for at least 16 hours before its first use. Failure to fully charge the battery before its first use will result in poor battery performance.
  2. Phone Setup
  3. Once you have fully charged your phone, you can proceed with setting up your phone's features. If your cordless phone includes an answering system, complete this setup process first. Turn on the answering system by pressing the on/off button. The message indicator light will display. The cordless phones are defaulted to English as the selected language. To change your language preference, press the "Skip" button for two seconds. The language will change to Spanish. Next, you will set up your voice time and day stamp. While the answering system is on, press the "Answer" button on your handset for two seconds. The phone will enter the answerer mode. Press the "8" key. This will take you to the time/day setup menu. Use the number keys to set the hour and minutes. Use the volume up and down arrows to set the AM/PM. Press "#" to save. The cordless handset will also require that you give it a name. Press the "Mute" button for two seconds until the handset reads "ENTER NAME." Enter the name of the handset by using the touchtone keypad. Press the "Mute" button to save. Enter the default area code by pressing "Mute" until the phone displays "AREA CODE." Enter your three-digit area code and press the "Mute" button to save.
  4. The Basics
  5. GE Cordless Phones are designed to be simple and convenient to use. To place or answer a call, press the TALK button. You can pre-dial a number by dialing the number before pressing the TALK button. When you are ready to make the call, press TALK and the phone will dial automatically. To answer a call that is waiting on the other line, press the FLASH button. If you experience call interference or bad reception while on a call, press the CHANNEL button until your line clears.
jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });


Nov 14, 2009 | Uniden Cordless Phone

1 Answer

No dial tone on my handset


when the phone rings just pick up the hand set and answer
if that doesn't work press the talk/answer button and answer

Oct 05, 2017 | GE 21008GE2 Dual-Handset Cordless...

1 Answer

My ge phone 900MHZ, cordless speakerfhone cw id model 26936GE1-A SN 00084148. SPEAKER WORKS, BUT HANDSET SAYS "no line to base" line is securely attached, speakerphone works


I need a replacement part for the phone model 26955 cordless handset and corded speaker phone. The part is called a handset hook that is used to hang this phone on the wall.. I would like to purchase this piece for the missing piece that did not come with my phone. Can you help me find this piece.

Jun 28, 2008 | GE Lands Phones

1 Answer

GE MODEL 28112 DECT 6.0 CORDLESS PHONE


I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Mar 26, 2008 | GE 28112 Trio Cordless Phone

1 Answer

Handset has No link to base


I was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the AC and phone cord from the base station and plugging both back it, then removing and replacing the handset to regenerate the security code.

Nov 17, 2007 | Xact Communication XG2200 Cordless Phone

1 Answer

Handset ?No Link To Base? error and no dial tone


2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.

Jan 14, 2007 | Xact Communication XG2200 Cordless Phone

Not finding what you are looking for?
GE 900 MHz Phone Logo

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Cindy Wells

Level 3 Expert

5344 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...