Question about Sony VPL-HS51A / VPL-HS60 Multimedia Projector
Hi, I have a sony VPL HS60. I changed the lamp and now can not change the wide screen mode. Pressing the Wide Screen button gives me the "not applicable" message. I have tried different sources and inputs. Without a signal the screen is filled as well if a wide screen movie is played, it is displays properly, but I do not have any control over the picture size. Any ideas or is it going in for service?
SOURCE: VPL-HS60 Scene Dimming
This is quite a sticky one as this could either be the lamp or the Ballast ( lamp's powersupply )
And the bad thing is that the only way to be certain , would be to first replace the lamp and if this continues the Ballast as well.
I would suggest you to replace the lamp first , as this is never a waste , you could always keep it as a spare and 99% of the time it is the lamp will give this kind of problem.
Good luck and thanks for using Fixya !
Posted on May 21, 2008
According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:
The above sequence should clear the counter.
Posted on Apr 09, 2009
Tips for a great answer:
Jul 10, 2012 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Aug 29, 2011 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Apr 09, 2009 | Sony VPL-ES2 LCD Projector
Nov 29, 2008 | Sony VPL-HS51A / VPL-HS60 Multimedia...
May 29, 2008 | Samsung Televison & Video
May 21, 2008 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Jan 14, 2008 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Apr 15, 2012 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Mar 27, 2007 | Sony VPL-HS51A / VPL-HS60 Multimedia...
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: