Question about Zio Corporation CameraMate RealTime (cm-50000) Video Capture

2 Answers

Smartdisk download site not responding

I need a driver for my Zio CameraMate. The SmartDisk download site is not responding. There are numerous "sites" that claim to be able to download the driver but I do not trust them. What are my options. Is the a reputable source for this software.

I ran Windows Movie Maker but it would recognize the CameraMate as a video capture device.

Posted by on

  • napoleon_a Dec 16, 2008

    I need driver for Cameramate Video Safe. Please email me.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

I can email you the driver.  It came from Zio and has worked fine for me.  But still, the process of geting the Cameramate to work is not an easy one.  You can also contact tech support. Here is what they sent me: From: "Techhelp4" <techhelp4@ziosupport.com> Date: June 15, 2006 5:16:45 PM EDT To: <cmyers1809@earthlink.net> Subject: CameraMate Drivers and Software Link
Hello Clay,   1) Please download and install the attached drivers for the device you have.   2) Double click on the attached file and extract it to a folder on your computer. It is important that you 
know where you are extracting the files to so that you can access them later.
 
3) Now connect the device to the computer.   4) Right click on My Computer and then go to properties.   5) Go to the device manager tab, if you are running Windows 2000 or XP then click on the hardware tab and then choose device manager.   6) Here you will find the Cameramate video device with a yellow ! or ? next to it, the device will appear as a odd symbol such as a "b" with a pi symbol next to it.   7) Double click on that device and go to the driver tab.   8) Click on the update driver button. This will open the hardware update wizard.   9) Make sure you select "no, not at this time" when the wizard asks if you want to 'connect to the internet to search for software'.  


 
10) Click Next. Now, choose 'install from a list or specific location'.   11) Click Next. Check 'search for the best drivers in these locations.   12) Uncheck 'search removable media'. Check 'include this location in the search'.   13) Now, browse to the folder to where you extracted the files to. Click next, and proceed with the installation.
 
14) To confirm just open device manager again and see if there are any more devices with yellow ! or? next to them. If there are then repeat the above process.     Part 2   We have recently released and posted the latest version of the software on our website. You may download the latest version  by clicking on the link below.  IF YOU CHOOSE TO UPDATE YOUR SOFTWARE, DO NOT USE THE CD THAT CAME WITH YOUR PRODUCT.  IT WILL NO LONGER WORK. Thank you.  Either cut and paste to your browser or click on the link.
http://www.smartdisk.com/Support/Downloads/Software/Zio/software/Software%20Updates/ProPix%20DVD%20V1.2_build8.zip   PPW-F543-8D28-F731-3446 for ProPix DVD
To unlock demo, please go to START, select ALL PROGRAMS, select PROPIX EVE/DVD, select UNLOCK DEMO     Thank You,   Erin SmartDisk Tech Support

Posted on Nov 29, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I posted my install CD online, here:

http://tinyurl.com/zio-drivers

It's 16 MB, unzip and burn to a CD, and the autorun should work. Hope it helps!

Posted on May 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a driver for my xp laptop


Zio was bought by SmartDisk, which was then bought by Verbatim.

None of their sites host this driver any more.

New equivalent devices costs £35, which is way more than they should be.

Support Information:
Device Type: Input Devices (mouse, etc.)
Manufacturer: Zio
Model: CameraMate Real Time Video Capture
Interface: USB
Operating Systemmag-glass_10x10.gif: Windows XP Professional
Age of Device: Not specified
FCCID:
hope this helps

May 23, 2011 | Zio Corporation CameraMate RealTime...

1 Answer

I Purchased CameraMate Real Time Video CM-50000 in April 2007 but I have recently retired and thought I would use the software to convert our daughters wedding video to DVD. I installed the CD which was...


Windows XP does not recognize the hardware so you will need to download the driver for it here is the direct link to download the driver for windows xp, Keep in mind when it states that it found new hardware you will want to browse for the driver on your computer so remember what file you download it to.Good Luck

http://www.smartdisk.com/Support/Downloads/Software/Zio/software/Software%20Updates/ProPix%20DVD%20V1.2_build8.zip copy and paste into address bar

Jan 26, 2011 | Zio Corporation CameraMate RealTime...

1 Answer

I need software for windows 7 for my cameramate


Cameramate is out of business, and was purchased by smartdisk.com
Their website does not respond either, so you may be out of luck.

Feb 09, 2010 | Zio Corporation CameraMate VideoSafe...

1 Answer

Zio Coporation CameraMate Driver


Smartdisk acqured ZIO in sept 05  Vertablim took over smart disk ? Her is a freeware site that has the software that you may need to download:
http://www.downloadplex.com/Drivers/Other-Devices/Others/Publisher-SmartDisk-Zio-Memory-Stick-Reader-Driver_100261.html

Jan 04, 2009 | Zio Corporation CameraMate VideoSafe...

2 Answers

Need a windows xp driver for SmartDisk CameraMate CM-50000


Try tech support or email me for the driver. From: "Techhelp4" <techhelp4@ziosupport.com> Date: June 15, 2006 5:16:45 PM EDT To: <claymyers@earthlink.net> Subject: CameraMate Drivers and Software Link
Hello Clay,   1) Please download and install the attached drivers for the device you have.   2) Double click on the attached file and extract it to a folder on your computer. It is important that you 
know where you are extracting the files to so that you can access them later.
 
3) Now connect the device to the computer.   4) Right click on My Computer and then go to properties.   5) Go to the device manager tab, if you are running Windows 2000 or XP then click on the hardware tab and then choose device manager.   6) Here you will find the Cameramate video device with a yellow ! or ? next to it, the device will appear as a odd symbol such as a "b" with a pi symbol next to it.   7) Double click on that device and go to the driver tab.   8) Click on the update driver button. This will open the hardware update wizard.   9) Make sure you select "no, not at this time" when the wizard asks if you want to 'connect to the internet to search for software'.  


 
10) Click Next. Now, choose 'install from a list or specific location'.   11) Click Next. Check 'search for the best drivers in these locations.   12) Uncheck 'search removable media'. Check 'include this location in the search'.   13) Now, browse to the folder to where you extracted the files to. Click next, and proceed with the installation.
 
14) To confirm just open device manager again and see if there are any more devices with yellow ! or? next to them. If there are then repeat the above process.     Part 2   We have recently released and posted the latest version of the software on our website. You may download the latest version  by clicking on the link below.  IF YOU CHOOSE TO UPDATE YOUR SOFTWARE, DO NOT USE THE CD THAT CAME WITH YOUR PRODUCT.  IT WILL NO LONGER WORK. Thank you.  Either cut and paste to your browser or click on the link.
http://www.smartdisk.com/Support/Downloads/Software/Zio/software/Software%20Updates/ProPix%20DVD%20V1.2_build8.zip   PPW-F543-8D28-F731-3446 for ProPix DVD
To unlock demo, please go to START, select ALL PROGRAMS, select PROPIX EVE/DVD, select UNLOCK DEMO     Thank You,   Erin SmartDisk Tech Support

Oct 26, 2008 | Zio Corporation CameraMate RealTime...

1 Answer

Drivers for vista


Head over to this url. Its the smartdisk site. All the drivers you should need are here. http://sdkbase.smartdisk.com/display/2n/index.asp?c=&cpc=&cid=&r=0.2225 Cheers, Andy

Aug 30, 2007 | Zio Corporation CameraMate RealTime...

1 Answer

DRIVERS WILL NOT INSTALL W2K SYSTEM.


Try the following driver: http://sdkbase.smartdisk.com/display/2/index.asp?c=cpc=e72ylkXWR8u0YnrbMviY&cpc=&cid=1&r=0.6935694

Jan 11, 2006 | Zio Corporation CameraMate VideoSafe...

Not finding what you are looking for?
Zio Corporation CameraMate RealTime (cm-50000) Video Capture Logo

1,730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zio TV Accessories Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Florin

Level 3 Expert

733 Answers

Tim Nelson
Tim Nelson

Level 2 Expert

83 Answers

Are you a Zio TV Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...