Question about Alpine DVD & Blu-Ray Players

1 Answer

I want to change the region code on an Alpine rse2 roof screen from region 4 to multi region

Posted by on

  • tonkins Nov 28, 2008

    I feel that there is a way you can do it as I had a unit supplied to me recently that was supposed to be region4 but did not play any region 4 dvd's but would play other dvd's. I sent the unit back to Apline and had the same unit back the next day and it would only play region 4 when I got it back. It didn't appear as if the unit had had any componentry changed over, so I believe there may be some way to program the unit to play other regions.

  • tonkins Nov 28, 2008

    No not at this stage, but thankyou for your time. Much appreciated.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,806 Answers

There are no region hacks for this in-car overhead dvd player, i can offer you an alternative if you want?

Posted on Nov 28, 2008

  • Lee Hodgson
    Lee Hodgson Nov 28, 2008

    like is said i can provide you with an alternative to this, but it would mean downloading a software tool to remove the region codes from the DVD's so they will play in any DVD player. Would you like the information?

  • Lee Hodgson
    Lee Hodgson Nov 28, 2008

    if you don't get anywhere, consider this option


    take care


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change to multi region


Multi region codes are available from all manufacturers. Ring Panasonic and have your model number ready. They may tell you it will void warranty but be persistant.

Feb 23, 2014 | DVD & Blu-Ray Players

1 Answer

Problems changing region code on Samsung DVD player VR 375


HELLO!
Give these a try!
Power ON
Press MENU
Enter code 57538
The current region code appears
For codefree/multi-region press 9
Press Open DVD door button
Power OFF and power ON

You could also try this!
Turn player on without disc inside Press MENU button
Enter your region code (See list below)
Highlighted 'region area number' will appear in the upper-left corner (on some players)
Press 9 to multi-region the machine
Turn machine off
Region 1 - 29334
Region 2 - 38767 (or 5 7 5 3 8)
Region 3 - 56732
Region 4 - 76884
Region 5 - 53814
Region 6 - 24462

Have a go and good luck! (:-)

Sep 11, 2009 | Samsung DVD-VR375 DVD Recorder/VCR

1 Answer

Is there a way to make my LG DVD multi regional?


please check this thread from answersbag.com


"1. Insert the DVD with Region Code which will not play. 2. Press 0000 on the remote and a new screen should appear showing Region Code for the LG V271 (as Region 4). 3. Select new region code as 0. 4. Press Pause to exit the screen and your LG V271 should now be region free."

Aug 02, 2009 | LG V271 DVD Player/VCR

2 Answers

I need to change my DVD players Region code to play all regions.


1.Switch on unit 2.Press- Setup on the remote 
3.Select the Lock option from the on screen setup menu 
4.Press Lock on the remote unit ( under slide cover) 
5.Press 0 7 times on the remote keypad 
6.A message appears stating the unit is now Code free on the screen 
7.Press Enter on the remote. 
8.Close Setup menu and switch unit off. 
9.Switch on and enjoy Multi-region DVD playing

please donot forget to rate this solution.
Thanks for using FixYa.

Jan 28, 2009 | LG RC199H DVD Recorder/VCR

1 Answer

Problem playing region 4 dvd's


Sorted it....followed following and changed to region 4 instaed of open to all regions and the the dvd's worked! Not sure why I had to change from multi-region to sole region 4 but why question when it works! Thanks

press remote keys in this order- open-setup-mute-last-next-this opens the service menu where you can select ALL regions or in my case changed to region 4 only!

Jan 02, 2009 | Yelo 800DVD DVD Player

3 Answers

Hi there, have a Samsung DVDV6800 purchased in July that wont play all region discs. Can you tell me how to put in the codes for multi zones?


1. Power on your player with no disc in the tray. Wait for message "No Disc" in the top left hand corner of your screen.
2. Press and hold the Repeat button on your remote control for approximately 5 seconds.
3. Enter the code below. (Note that you must know what Region your player is currently set to in order to know which code is appropriate.)
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
4. The message "No Disc" will now be replaced with the default region number of your player. For example, Australian and N.Z players will display a small "4".
5. Press "9" for multi-region.
6. Open tray and insert your title.
7. Close tray.

The player will continue to hold the changes you have made. If this does work for you the first time, keep repeating steps 2&3 until the players default region number appears. The amount of time holding the repeat button does seem critical.

Sep 30, 2008 | DVD & Blu-Ray Players

1 Answer

LG DVD PLAYER DV8621P


Turn on the unit, with remote, (no disc in player), press pause, then key 3 1 4 1 5 9
Instructions for changing region code appear on screen,
Set to Region or Disc you want to play, 1, 2, 3, 4, 5, 6, or 0 for all. Press pause again. Turn off machine.

Jun 26, 2008 | LG DVD & Blu-Ray Players

1 Answer

Need to change my Crown CDV 1100B player to multi region, have tried recommended options from other sites, but to no avail. This what I've tried so far. 1) Press set up 2)press 1369 (which was...


a) Press SETUP button on the remote control to display the setup
screen

b) Press "1369<<<>" on the remote control ( "<" = left navigation
button; ">" = right navigation button)

c) A new item "VERSION" is added on the menu

d) Select thr VERSION item and press SELECT button to enter

e) Press the right navigation button ">" on the remote control to
change the region code

f) Press SETUP button again to exit the region code change mode

Note: Region code 0 is "all region code".
OR

1.press eject to open the draw.

2.type 9-8-1-7.

3.press select to go through regions.

4.change to region 9 for multi region.

5.press eject to close the draw.

OR

1. Press the Open/Close button on your remote control to open the drive tray

2. Press the 8, 4, 2 and 1 buttons on your remote control, in order, one at a time

3. Press the Enter button on your remote control until the hidden menu appears

4. Select 1 for region 1, 2 for region 2, and so on, or All for multi-region

5. Press the Open/Close button on your remote control


To alter the Macrovision settings on this player

1. Press the Open button on your remote control to open the drive tray

2. Press the 4, 5, 6 and 1 buttons on your remote control, in order, one at a time

3. Select Enable to enable Macrovision, or Disable to disable Macrovision

May 03, 2008 | DVD & Blu-Ray Players

1 Answer

I own an LG (LH-W750TA) DVD player that is set for DVD region 4. I am after an unlocking code to allow me to view DVDs from region 1 NTSC.


Open tray

Press PAUSE

Enter 0 0 0 0 0

Region change screen should appear.

Enter region 1 - 6 or 0 for multi-region.

Press PAUSE

Apr 23, 2008 | DVD & Blu-Ray Players

1 Answer

Multi region hacks


Try this may be work
Multi-Region:
Put DVD into player - wait for regional code violation screen to appear
Once this has occurred press the M (Memory) button on your remote
Press 1 for Title 1 and Play on the remote - this will over-ride the regional code violation detection menu
You can watch the movie by pressing Fwd on remote and change chapters by using the T (Title/Chapter) button on the remote)
or

Switch On DVD player without disc in machine
Press Enter
Press 8, 4, 2, 6 and 9
Press Enter
Player should turn itself Off. If not switch it Off
Switch player back On

Mar 05, 2008 | DVD & Blu-Ray Players

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96396 Answers

The Knight
The Knight

Level 3 Expert

68209 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Alpine DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...