WRONG MODE E001 - Casio Parts Cash Register PC Desktop

If the error stops when in program mode, press subtotal. If it stops in Reg mode, press cash

Turn the key back from the X position.
www.casposs.com.au/client-support/tips/27-tech-talk-1-wrong-mode-error.html

E001 error is the generic Wrong Mode error message on the Casio tills.

It simply means that a transaction was started in one mode without being finished before the key was turned to a different.

Return the key to the mode you were in before, complete the transaction then try turning the key.

If you keep getting the error turn the X and press SBTL.

Thanks,

Shopstuff

You are in the wrong mode. Turn the key until the message goes away and that will show you which mode you should be in.

You have turned the key before you finished in the previous mode. Turn the key back to where you were last using it and finish what you started in that mode (for example, you may be half way through a sale)

Go to Casio Support Webpage and download the Owners Manual.

Here: http://www.casio4business.com/sa/support/downloads/downloads_manuals.html

You have turned the key before you finished in the last mode. Turn the key to where you were last using it (E1 will go away), then finish what you started in that mode. Then you can turn the key.

You have turned the key before you finished in the last mode. Turn the key to where you were last using it (E1 will go away), then finish what you started in that mode. Then you can turn the key.

E001 = Wrong Mode, which means u had did something in another key mode but not yet done.

Solution 1 :

1. Turn the key to another position where the screen do not show E001
2. Press [Subtotal]
3. O.K

Solution 2: Flag Clear the Machine

1. Key turn to OFF
2. Keep Press [FEED]
3. Key turn to PGM
4. Release [FEED]
5. U will see "INIT 0000000000"
6. Press [Subtotal]
7. U will see "FFFFFFFFFF"
8. Wait for 10 seconds, the machine will print
9. OK

E001 is a fixing assy fault you have to clear the error in service mode after correcting the fault of course. I would try clearing the error code in service mode 1st. press *28* function tab clear tab error ok then restart copier