Question about Maytag Neptune FAV6800AW Top Load Washer

2 Answers

I need an instruction manual for Maytag topload washer Neptune TL

FAV6800. It appears to have water remaining after some spin

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 335 Answers

Get the Service Manual this will help you diagnose issues with this washer.  I found a Service repair manual on this site search for this; FAV6800 Manual.  Check the postings and you will find a URL to the manual.

From another member a step by step to dump water from machine in diag mode  ""One other thing I learned for those of you who don’t want to bail out the water in the tub. If you want to have the machine drain the excess water without bailing this should work. Turn the machine off and make sure the "locked door" light goes off. Then hold the "Spin" and "Enviro Plus" buttons at the same time for 3 seconds. "00" should then show up on the display. Then hit the "Delicate" button, then the “Pre-soak” button. This should activate the pump and get all the water out. Once the water is out hit the off button. You then may want to try the Spin cycle alone. These directions can be found on the Troubleshooting Manual found folded up behind the rear panel of the machine where the main electrical circuit board is located.""

Posted on Dec 15, 2008

  • cllral Dec 16, 2010

    That advice worked beautifully. But then what? Do I still need to check replacing the drain pump? Clearly it can drain. Also I can't find any clogs.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

PUMP MAY NEED TO BE REPL/ OR INSPECTED LID SWITCH

Posted on Nov 30, 2008

  • Johnny Ramirez
    Johnny Ramirez Nov 30, 2008

    PUMP MAY NEED TO BE REPL/ OR INSPECTED LID SWITCH

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Neptune TL


The TL neptune has a small shock absorber on the middle left hand corner behind the front panel. it uses a small wiring clip that could be loose, with a type of inertia switch.
A common issue I've encountered with this machine is underloading. The snubber and springs allow a fair amount of movement. Don't do a few simple items or mixed load in this machine.
If these don't seem to help, let us know.

Nov 04, 2012 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My washer fills with water then it makes a noise like there is something stuck and aggitator won't spin


You need the Service manual to start troubleshooting. There could be something jamed under the tumblers. The Service Manual will get you stareted,


Google this Neptune TL Washer FAV6800AWW

You will find FAV6800A or FAV8800A help.

Mar 09, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My MAytag will not spin the water outta my clothes on spin cycle


If you machine is a FAV6800A or FAV9800A don't worry about the last two letters of the model number.

Google this; Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum and you can get the Service Manual and repair support at that site..

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues that I have helped owners with. I'm an owner of a FAV6800AWW top load machine.

If you need help post in the Maytag/Magic Chef/Admiral/Jenn-Air forum with your issue and we will try to help.

Feb 28, 2011 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

I need to replace the Motor Board Control on my Magtag Neptune TL Washer. Do you have a price for it?


Hi


Its available for $213 and 219 with different dealers. Please check these links for more details from where to buy--

Maytag Neptune FAV6800 Control Board Link 1

Maytag Neptune FAV6800 Control Board Link 2

Please post back for any further assistance.

Daniel

Jul 26, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

0. We need a manual for Maytag Neptune TL. IT IS


f your machine is a FAV6800A or FAV9800A see if this post will help. Service manual link or located there. here it is just in case

Clutch Fix

Here it is just in case;

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference.

Jun 25, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

How do you put a fav6800 maytag washer into dianostic mode


You need the Service Manual;

Here are some handy links; The Service Manual for reference. Sears Parts Direct for reference.

From Page 14 of the Service Manual;
Enter / Exit Service Mode To enter Service Mode press the Enviro Plus and Spin Only keys (simultaneously) for three seconds or until the control beeps.

Rich

Feb 21, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Neptune tl washer


You will need to replace your timer control.


John

Sep 28, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Neptune TL won't spin, continuously beeps through spin settings


if water remains in the tub it will not go into the spin cyc something in the pump clear it and try again

Aug 26, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag neptune tl topload washer


You are going to have to pull the front cover off the machine and do an inspection for that water leak here is some support info.
The Service Manual for reference. Sears Parts Direct for reference.
Raise the top of the machine. Insert a flat blade putty knife approximately 2.5” from the left and right sides of the washer top, depress the spring tabs securing machine top to the washer base. See page 33 of the SM for putty knife insertion point.

5/16 nut driver or 5/16 ¼ socket on an extension to remove front panel see page 41 of the SM

About the “OF” alarm if it’s a valid error code it seems to be undocumented. Let me run this by you. I wonder if it could be something like valid “OP” error code with a bad segment of the second portion of the LED display. If your FAV6800AW would allow you to enter a Spin Only cycle the display would read “10” min for the countdown timer at the start of that cycle. Can you put the washer in a Spin Only cycle and see if the console display indicates “10”? You can then cancel the spin only cycle.
How did you make out with your previous “OD” error?
Rich

Jun 10, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag Neptune TL.


easy!the water pressure switch is not working the little hose going to it could blocked or off,or the pressure switch bottle could be blocked. rate me if right Eire

Dec 02, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

1,180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...